Page 2 - IMPORTANT SAFETY INSTRUCTIONS; and keep them at least 0.5 meters from the sides and rear. Do not cover.
HEAT LIVE RELAX IMPORTANT SAFETY INSTRUCTIONS IMPORTANT: Read the safety precautions of this booklet carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could...
Page 3 - CONTROL FUNCTIONS; The power indicator will light up (but
HEAT LIVE RELAX CONTROL FUNCTIONS GETTING STARTED 1. Carefully remove the heater from packaging and the carton, and unwind the cord to its full length. 2. Either fit the castors & place the heater onto a stable, flat and dry surface, or fit the mounting brackets to a stable wall & hang from ...
Page 4 - OPERATING INSTRUCTIONS; POWER SETTINGS
HEAT LIVE RELAX OPERATING INSTRUCTIONS TURNING ON & OFF Once the unit is in “stand-by mode”, press the “power/set” button once to turn the unit on. The LED display will show the current room temperature. Hold down again for 3-5 seconds and the unit will go back into “stand-by mode” (only power i...
Page 5 - INSTALLATION GUIDE; Never install or use the heater directly below a wall socket.; FITTING CASTORS
HEAT LIVE RELAX INSTALLATION GUIDE This heater can either be mounted to a wall or used with the supplied castors. Please note the following safety warnings: This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Always use the control panel or castor supports when...
HEAT LIVE RELAX Position the bracket on the wall in the desired position & drill holes for four mounting screws. Once the holes are drilled, use four screws (appropriate for the type of wall) to fix the bracket firmly in place. Check for strength. Carefully place the heater (slightly tilted forw...
Page 7 - Do not try to repair the heater.; specifications or appearances without notice.
HEAT LIVE RELAX HINTS & TIPS Where possible, your electric panel convection heater should be connected to a power outlet that uses a separate 10 amp power circuit than other items. This will avoid overloading your household fuse. In the event that your household fuse is overloaded and trips, ple...