Esatto ESAC35RC - User Manual

Table of Contents:

• Page 2 – Welcome
• Page 3 – Contents
• Page 4 – Read Safety Precautions Before Operation and Installation; or; CAUTION; EN Standard requirements; WARNINGS FOR PRODUCT USE; Do not; the fan may be rotating at high speeds.; collect around the unit and cause explosion.; Do not; Safety Precautions; Do not; Page 3; WARNING; This symbol indicates the possibility; CAUTION; This symbol indicates the possibility of; This page
• Page 6 – Page 4; CLEANING AND MAINTENANCE WARNINGS; Page 5; WARNINGS FOR PRODUCT INSTALLATION; do not; the
• Page 8 – Page 6; WARNING for Using R32/R290 Refrigerant; UL; IEC; Standard Requirements); European Disposal Guidelines; C o rrect D isp o sal o f T h is Pro d u ct; Page 7; Unit Specifications and Features; Indoor unit display; Display Code
• Page 10 – Page 8; Page 9; Operating temperature; To further optimize the performance of your unit, do the following:; Keep doors and windows closed.; Inverter Split Type; When outside
• Page 12 – Other Features; SLEEP; Not all; Setting vertical angle of air flow; NOTE ON LOUVER ANGLES; Do not put your fingers in or near the blower; Deflector
• Page 14 – Care and Maintenance; button
• Page 16 – Common Issues; The power cord is damaged or abnormally warm; Troubleshooting
• Page 18 – Problem
• Page 20 – Installation Summary - Indoor Unit; NOTE ON ILLUSTRATIONS; Unit Parts
• Page 22 – DO NOT; install unit in the following; NOTE FOR CONCRETE OR BRICK WALLS:; Indoor Unit Installation; When drilling the wall hole, make sure to; Type A
• Page 24 – Step 4: Prepare refrigerant piping; Based on the position of the wall hole relative; NOTE ON PIPING ANGLE; PLUG THE UNUSED DRAIN HOLE; Rated Current of
• Page 26 – DO NOT MIX UP LIVE AND NULL WIRES; This is dangerous, and can cause the air; NOTE ABOUT WIRING
• Page 28 – Outdoor Unit Installation; Insert the drain joint into the hole in the base; seal; Air inlet
• Page 30 – W x H x D; PAY
• Page 32 – When connecting refrigerant piping,; let substances or gases other than the specified; Model; Refrigerant Piping Connection; Step 4: Connect pipes; MINIMUM BEND RADIUS; Step 3: Flare pipe ends; PIPING EXTENSION BEYOND FLARE FORM; Outer Diameter of
• Page 34 – Torque Requirements; Instructions for Connecting Piping to Outdoor Unit; TORQUE REQUIREMENTS; DO NOT USE EXCESSIVE TORQUE; torque requirements shown in the table above.; Preparations and Precautions; BEFORE PERFORMING EVACUATION; Evacuation Instructions; OPEN VALVE STEMS GENTLY; Air Evacuation
• Page 36 – Note on Adding Refrigerant; mix refrigerant types.; ADDITIONAL REFRIGERANT PER PIPE LENGTH; Electrical Safety Checks; Electrical and Gas Leak Checks
• Page 38 – Test Run Instructions; Test Run
• Page 40 – Purchase Details
• Page 41 – Attach your receipt to this page
• Page 42 – Warranty Information
• Page 44 – A R E S I D E N T I A