Equator ED 848 Dryer – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Table of Contents:
Page 9 – Wall Mounting Instructions; A minimum 2 in (50 mm) is needed between the top of dryer
Page 11 – Only flexible or rigid metal duct shall be used for exhausting.
Page 12 – PARTS AND FEATURES
Page 13 – Control Panel Functions; Step 2 – Program
Page 14 – Step 3 - Time Button
Page 15 – Removing the Filters
Page 16 – Cleaning the Air Intake Filter
Page 17 – Technical Specifications
Loading the manual
Ultra Compact Dryer
Model - 848
OWNER’S MANUAL
Read the instructions carefully and keep for future reference
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 9 - Wall Mounting Instructions; A minimum 2 in (50 mm) is needed between the top of dryer
Wall Mounting Instructions 1. Determine and mark the dryer position on the wall. This dryer is not suitable to be placed directly on top of a washing machine. A minimum 2 in (50 mm) is needed between the top of dryer and the ceiling for ease of installation. If mounting on top of a washing machi...
Page 11 - Only flexible or rigid metal duct shall be used for exhausting.
The applinces shall not be exhausted into a chimney, wall, ceiling, attic, crawl space, or a concealed space of a building. Only flexible or rigid metal duct shall be used for exhausting. In Canada, only those foil-type flexible ducts, if any, specifically identified for use with the appliance by th...
Page 12 - PARTS AND FEATURES
Page 13 - Control Panel Functions; Step 2 – Program
Control Panel Functions Time Display - Shows Program times and time remaining (minutes) Light Bar - Shows colors for different programs Start/Pause Time Program Power Color Program Display Red Time Dry: Hight Heat 150 Light Blue Sensor Dry: Hight Heat 200 Dark Blue Sensor Dry: Air + High Heat ECO Gr...
Page 14 - Step 3 - Time Button
b) Light Blue: The dry cycle runs at high heat and the default time is 200 minutes. This program works with a sensor and will adjust the time automatically and will stop when the clothes are dry. The time cannot be changed in this program. c) Dark Blue: This program is the “ECO” cycle which runs int...
Page 15 - Removing the Filters
Maintenance Please unplug the power cord prior to any cleaning. The Lint Filter must be in place whenever drying. It must be cleaned before each use. The Filter assembly is located at the back of the drum. 1. Removing the Filters Remove by pulling outwards, with fingers inserted into the four holes ...
Page 16 - Cleaning the Air Intake Filter
3. Re-installing the Filters After cleaning, assemble in the sequence of Exhaust filter - Lint Filter - Exhaust Vent Shroud. Align the recesses in the center with the projection in the center of the drum. Ensure that it is firmly inserted (as shown in Figure 3). Cleaning the Air Intake Filter The Fi...
Page 17 - Technical Specifications
Cleaning the interior & exterior of the Dryer Do not wash directly with water. Do not use thinner, gasoline or alcohol. Do not use any type of spray cleaner when cleaning the interior. If dryer drum becomes stained, clean the drum with a damp cloth. Remove any residue before drying the next load...