Equator ED 848 - Manuals

Control Panel Functions Time Display - Shows Program times and time remaining (minutes) Light Bar - Shows colors for different programs Start/Pause Time Program Power Color Program Display Red Time Dry: Hight Heat 150 Light Blue Sensor Dry: Hight Heat 200 Dark Blue Sensor Dry: Air + High Heat ECO Gr...

b) Light Blue: The dry cycle runs at high heat and the default time is 200 minutes. This program works with a sensor and will adjust the time automatically and will stop when the clothes are dry. The time cannot be changed in this program. c) Dark Blue: This program is the “ECO” cycle which runs int...

Maintenance Please unplug the power cord prior to any cleaning. The Lint Filter must be in place whenever drying. It must be cleaned before each use. The Filter assembly is located at the back of the drum. 1. Removing the Filters Remove by pulling outwards, with fingers inserted into the four holes ...

3. Re-installing the Filters After cleaning, assemble in the sequence of Exhaust filter - Lint Filter - Exhaust Vent Shroud. Align the recesses in the center with the projection in the center of the drum. Ensure that it is firmly inserted (as shown in Figure 3). Cleaning the Air Intake Filter The Fi...

Cleaning the interior & exterior of the Dryer Do not wash directly with water. Do not use thinner, gasoline or alcohol. Do not use any type of spray cleaner when cleaning the interior. If dryer drum becomes stained, clean the drum with a damp cloth. Remove any residue before drying the next load...