Epson Stylus NX515- User Manual
Epson Stylus NX515– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
*411638300*
*411638300*
If anything is missing, contact Epson as described on the back.
Note:
The model name of your product may vary slightly from the one shown above.
The included CD and documentation apply to all products in the series.
Caution:
Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Canada only:
For French speakers, remove sticker(s) from the backing sheet and
place over corresponding text on the control panel.
Remove all protective materials.
Unpack
1
Start Here
Select language
3
Press
or
to select your language, then press
OK
.
3
Squeeze the edge guide and slide it left.
Tip:
If the feeder guard is in the way, flip it forward.
4
Load paper against the right edge and behind the tab, with the printable
side face up.
Note:
Don’t load the paper sideways; always load it short edge first.
5
Slide the edge guide over.
Continue with section 6 to choose your connection type and install software.
5
Press each cartridge down until it clicks.
6
Close the ink cartridge cover. Press it down until it clicks.
7
Lower the scanner.
8
Press the
OK
button to charge the ink. Charging takes about 3 minutes.
Note:
Your NX510 Series ships with full cartridges and part of the ink from the
first cartridges is used for priming the NX510 Series.
Caution:
Don’t turn off the NX510 Series while the ink system is charging or
you’ll waste ink.
(Included for
Canada only)
1
Connect the power cable.
Caution:
Do not connect to your computer yet.
2
Raise the display screen, then press the
On
button.
Turn on and adjust
2
Power cord
Series
Install ink cartridges
4
Note:
Do not load paper yet.
1
Lift up the scanner, then open the cartridge cover.
2
Shake the ink cartridges gently 4 or 5 times, then unpack them.
3
Remove only the yellow tape from each cartridge.
Caution:
Don’t remove any other seals or the cartridges may leak.
4
Insert the cartridges in the holder for each color.
1
Open the paper support and pull up the extensions.
2
Open the output tray, pull out the extensions, and raise the stopper.
Note:
If you are using legal-size paper, do not raise the stopper.
5
Load paper
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
