Epson R2400- User Manual
Epson R2400– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation Procedures:; ) Second step: Remove out the original cartridges
- Page 5 – Refill Ink; Please keep the printer
- Page 6 – Attention for maintenance:
CIS for Epson Stylus Photo R2400
Thank you for purchasing ST Continuous Ink Supply System. We appreciate
your support and will try our best to make your experience with our products a
pleasant one. Printing has been a different experience ever since you installed
ST Continuous Ink Supply system on your own printer. Just imagining being
able to print without regard to the ink level in those expensive little cartridges.
Please take your time installing ST Continuous Ink Supply system. Do not
remove your old cartridge until you have the ST CIS system primed and ready to
install (to prevent the drying of heads). In addition, make sure you are getting
perfect nozzle checks before installing the ST CIS system. The ST CIS system
won
’
t be able to work properly if the nozzles are previously clogged.
Most people get a perfect nozzle check the first time after installing the ST
Continuous Ink Supply system; others may need to run two or three cleaning
cycles or let the printer sit for a while before they get the perfect results.
1
、
General Guide:
1) Components
A
、
CIS system 1 set B
、
Air filters 8pcs C
、
Support Arm 1 set
D
、
Refill Kit 8pcs E
、
Instruction CD 1pc
2) Opening box inspection
a
、
Check whether all the accessories are ready.
b
、
Check whether there's leakage of CIS System, whether some tubes have been
separated from CISS. If there is, please kindly to contact the local dealer.
C
、
Check whether there is air space in the tube. If the length of air space is more than
20cm, please clean the printer head for 2 or 3 times before printing.
2
、
Printer testing:
1) Check whether the printer is in normal condition, like mechanical status, lubrication
status etc.
2) Print testing lines to ensure the printing head is good condition.
3) Print pictures to see whether the printing image is ok.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Epson R2400
Summary
3 、 Installation Procedures: 1) First step Put the CISS on the left side Pull out the small rubber plug Place 8pcs of air filters into of the printer. In the meantime from the air hole as above air holes, the thicker side place all the tubes at correct picture shown. is down into tank. position. 2) ...
OK Everything is in normal You can work your print Show breaks If it show this breaks, please clean the printing head Enter this item If there show breaks, please clean your printing head. It is possible that the wispy air have entered into the printing head. If it is still show little breaks specia...
First place the left side of cartridge cover down correctly, second, put the other side of the cartridge cover at the above of the cart and adjust the position of the connection Then press the right side of the cartridge cover to make it down to the suitable position, now it is ok to work. 7 、 Atten...
