Page 2 - Contents; Introduction
2 Contents Contents Introduction 5 Projector Parts 6 Remote Control 8 Optional Accessories 9 Registration and Warranty 9 Using This Manual 10 Setting Up the Projector 11 Choose a Location 11 Installing the Projector 15 Connecting the Cables 17 Connecting Video and Computer Equipment 17 Making Other ...
Page 3 - Making Detailed Adjustments
Contents 3 Advanced Color Adjustments 32 Adjusting the Gamma Setting 33 Adjusting RGBCMY 34 Locking the Projector 34 Making Detailed Adjustments 36 Using the Menu System 36 Changing How the Menus Display 37 Adjusting the Picture Quality 38 Input Brightness Settings 38 Sharpness and Picture Quality S...
Page 4 - Maintenance
4 Contents Maintenance 58 Cleaning the Lens 58 Cleaning the 3D Glasses 59 Cleaning the Projector Case 60 Cleaning and Replacing the Air Filter 60 Replacing the Lamp 62 Resetting the Lamp Usage Timer 65 Checking the Projector Status 66 Storing the Projector 66 Transporting the Projector 67 Problem So...
Page 6 - Projector Parts; Front
6 Introduction Projector Parts Air exhaust Projector lens Adjustable foot HDMI ports Remote receiver Vertical lens shift dial Front Back Lamp cover Air intake Air filter cover Power inlet Kensington ® lock port RS-232C port Video port PC port Control panel Horizontal lens shift dial Focus ring Zoom ...
Page 7 - Bottom
Introduction 7 Escape button Power button Mounting bracket attachment points Bottom Projector Control Panel Source button Menu navigation/ vertical keystone buttons Front adjustable feet Menu button Enter button Retractable cover
Page 8 - Remote Control
8 Introduction Remote Control Source buttons Switch between equipmentconnected to the projector On button Turns projector on Menu navigationbuttons 3D format button Adjusts the 3D Format setting Color Mode button Quickly change color settings to match room lighting Aspect button Changes the picture’...
Page 9 - Optional Accessories; Quick Setup; Home Service. In the unlikely event of an
Introduction 9 Optional Accessories Epson provides the following optional accessories for the projector: In addition to the accessories listed above, 1-year and 2-year extended service plans are available. You can purchase these plans and other accessories from an authorized Epson reseller. To find ...
Page 10 - Using This Manual; Please follow these guidelines as you read through the manual:; If you need more help, you can use the Epson
10 Introduction Using This Manual This book contains all the information you need to use the projector, in addition to basic setup and maintenance instructions, troubleshooting tips, important safety instructions, specifications, and warranty information. Please follow these guidelines as you read t...
Page 11 - Setting Up the Projector; Choose a Location
Setting Up the Projector 11 Setting Up the Projector Follow the instructions in this section to choose a location for the projector, connect the cables, and display an image. Choose a Location You can install the projector for the viewing setups shown below, as well as rear projection. Front Ceiling
Page 14 - Also keep these considerations in mind:
14 Setting Up the Projector To determine the exact image size when you know the projection distance (or the exact projection distance when you know the desired image size), you can use the Image Size Calculator. This program is available on the Epson website at epson.com/support (U.S.) or epson.ca/s...
Page 15 - Installing the Projector; button on the remote control.; button to exit the menu system.
Setting Up the Projector 15 Installing the Projector To install the projector, you first need to determine the location, based on the size of your screen (maximum diagonal image size). Use the tables on page 13 as a guide to positioning the projector. To suspend the projector from a ceiling, you wil...
Page 17 - Connecting the Cables; Connecting Video and Computer Equipment
Setting Up the Projector 17 Connecting the Cables Connecting Video and Computer Equipment You can connect the projector to many types of video equipment, such as a Blu-ray Disc ™ /DVD player, digital tuner, cable or satellite box, video game console, camcorder, or digital camera. You can also connec...
Page 18 - For best results, connect your video equipment to the; equipment doesn’t support HDMI, connect it to either the; Connect the HDMI cable to one of the HDMI ports on the projector.
18 Setting Up the Projector For best results, connect your video equipment to the HDMI port, if possible. If your equipment doesn’t support HDMI, connect it to either the Component (for high quality, component video) or Video (for composite video) port. Note: You need to use a High Speed HDMI cable ...
Page 19 - Making Other Connections; port and set the Trigger Out menu option to
Setting Up the Projector 19 Making Other Connections Connect the power cable and other cables described below, depending on how you plan to use the projector. ■ Plug the power cable into the projector and a grounded electrical outlet. ■ To use an AV controller with the projector, connect a 9-pin nul...
Page 20 - Installing Batteries in the Remote Control
20 Setting Up the Projector Installing Batteries in the Remote Control The remote control uses two AA batteries. Warning: Keep batteries away from children. If a battery is swallowed, contact your doctor immediately. 1. Release the tab and lift open the cover. 2. Insert two new AA batteries as shown...
Page 21 - Turning the Projector On and Off; Turning On the Projector; Turn on the power switch on the back of the projector.; button on the remote control or the
Setting Up the Projector 21 2. Do one of the following: ■ Plug the other end of the USB cable into the USB-to-AC adapter, then connect the adapter to a wall outlet. ■ Plug the other end of the USB cable into a computer or other device with an available USB port. Note: Epson does not guarantee the co...
Page 22 - Turning Off the Projector; Selecting the Image Source
22 Setting Up the Projector Note: To prevent children from turning on the projector, you can use the Child Lock feature. See page 34 for details. If you’ll be using the projector at an altitude above 4921 feet (1500 meters), turn on High Altitude Mode so the fan can properly cool the projector at th...
Page 23 - If you press the; Positioning the Image
Setting Up the Projector 23 If you press the source button on the projector, you see a list of available sources. Press the source button to move through the list and select the desired source. Note: If an image does not appear, see “Problem Solving” on page 68. To temporarily turn off the image and...
Page 26 - Making Basic Adjustments; Focusing and Zooming; Use the focus ring to sharpen the image.
26 Making Basic Adjustments Making Basic Adjustments Follow the instructions in this chapter to make basic adjustments to the image shape, size, color, and quality. For further refinements, see “Making Detailed Adjustments” on page 36. Focusing and Zooming Use the focus ring to sharpen the image. Us...
Page 27 - Choosing the Aspect Ratio; is
Making Basic Adjustments 27 Choosing the Aspect Ratio In many cases, video signals are automatically resized to fit on your screen when Auto is selected as the Aspect setting. You may need to change the size of the image (or aspect ratio) for certain image types by pressing the Aspect button on the ...
Page 28 - Viewing 3D images
28 Making Basic Adjustments ■ Anamorphic Wide to display images that have a 2.40:1 aspect ratio (such as CinemaScope ® ) when using a commercially available anamorphic lens (available from Epson—see page 9). Note: If you use this setting without an anamorphic lens, the image fills the screen vertica...
Page 29 - See page 71 for more 3D troubleshooting tips.
Making Basic Adjustments 29 Note: If the glasses don’t automatically display 3D content, you may need to pair them with the projector. Move the glasses within 10 feet (3 m) of the projector, then press and hold the Pairing button on the 3D glasses for at least 3 seconds. The status light on the glas...
Page 30 - Projecting in Split Screen mode
30 Making Basic Adjustments Projecting in Split Screen mode You can use the Split Screen feature to simultaneously project two images from different image sources next to each other. You can control the Split Screen feature using the remote control or the projector menus. The Split Screen feature is...
Page 31 - Choosing the Color Mode
Making Basic Adjustments 31 2. Press the Menu button. You see this screen: 3. To select an input source for the other image, select the Source setting, press Enter , select the input source, select Execute , and press Enter . (You can also change image sources, if necessary.) 4. To switch the images...
Page 32 - Advanced Color Adjustments
32 Making Basic Adjustments Select the image source you want to adjust, then press the Color Mode button on the remote control. Choose from these settings: ■ Cinema for viewing movies in a dimly lit room. ■ Dynamic for projecting the brightest picture available. ■ Living Room for watching television...
Page 33 - Adjusting the Gamma Setting
Making Basic Adjustments 33 Adjusting the Gamma Setting You can select from five gamma settings (2.0 to 2.4) or customize your own setting from your image or a displayed graph. Lower values will increase the contrast of dark areas, but tend to blur the bright areas. Higher values will darken the lig...
Page 34 - Adjusting RGBCMY; Locking the Projector
34 Making Basic Adjustments Adjusting RGBCMY Use this feature to adjust the hue, saturation, and brightness for each of the red (R), green (G), blue (B), cyan (C), magenta (M), and yellow (Y) color components. 1. Press the RBGCMY button. You see the following displayed on the screen: 2. Use the u or...
Page 36 - Using the Menu System
36 Making Detailed Adjustments Making Detailed Adjustments You can use the projector’s on-screen menus to make detailed adjustments to the image quality—such as the brightness, contrast, sharpness, and color. You can also change the menu display, sleep mode settings, and other projector features. Us...
Page 37 - Changing How the Menus Display
Making Detailed Adjustments 37 4. When you’re finished, press the Esc button to return to the previous menu or press the Menu button to exit the menu system. To display one of the line menus, press the Enter button. You see a display like this at the bottom of the image: ■ Press the l or r button to...
Page 38 - Adjusting the Picture Quality; Input Brightness Settings
38 Making Detailed Adjustments Adjusting the Picture Quality Before fine-tuning the image using these adjustments, make sure you have already selected the best Color Mode for your picture and viewing environment, as described on page 31. Then use the settings in this section to finish adjusting the ...
Page 40 - Sharpness and Picture Quality Settings
40 Making Detailed Adjustments Sharpness and Picture Quality Settings If the image looks fuzzy, or if it contains noise or flickering, you can use these settings to correct it. ■ Sharpness Use this function to make lines and edges appear more distinct in the image. This setting is stored separately ...
Page 41 - button; Color Settings; Adjusts the color intensity of the image.; Shifts the color balance between magenta and green.
Making Detailed Adjustments 41 ■ Noise Reduction Note: This is not be available with a signal input through the PC port. This setting reduces flickering of analog images. You can select from 3 levels of noise reduction. ■ Frame Interpolation This setting compares the current and previous frames, the...
Page 42 - to adjust darker shades and
42 Making Detailed Adjustments ■ Abs. Color Temp. Shifts the color balance between red and blue, making the image appear warmer or cooler. ■ Skin Tone Makes fine adjustments to the tint and controls the amount of red or green in the image. Also useful for correcting black-and-white images, if they l...
Page 43 - D Setup; D Display
Making Detailed Adjustments 43 ■ Gamma You can select from five gamma settings (2.0 to 2.4) or customize your own setting from your image or a displayed graph. Lower values will increase the contrast of dark areas, but tend to blur the bright areas. Higher values will darken the light areas. See pag...
Page 45 - Adjustments for Computer Images; Split Screen Setup; Screen Size
Making Detailed Adjustments 45 Adjustments for Computer Images In addition to the settings described previously, you can adjust the Tracking and Sync settings for analog RGB computer images. Normally, these settings are adjusted automatically by the projector. If you notice that the image is blurry ...
Page 46 - Swap Screens
46 Making Detailed Adjustments Note: Depending on the source and resolution of each input, the two screens may not appear to be of equal size when the Equal option is selected. ■ Source Select this option to open the Source menu and select which inputs should be displayed in split screen mode. The L...
Page 47 - Creating Memory Settings; Selecting Memory Settings
Making Detailed Adjustments 47 Selecting Memory Settings and Resetting the Projector Your projector comes with 10 memory locations where you can save customized settings to obtain the best picture quality for each of your video inputs. Creating Memory Settings Memory settings can be used to store mo...
Page 48 - Renaming Memory Settings
48 Making Detailed Adjustments Renaming Memory Settings You can rename memory settings so that they are easier for you to recognize. 1. Press the Memory button on the remote control. 2. Select Rename Memory . 3. Select the memory name you want to change, then press the Enter button. The name selecti...
Page 49 - Resetting the Projector
Making Detailed Adjustments 49 Resetting the Projector If the image quality isn’t what you expect, one or more settings may be adjusted improperly. If necessary, you can restore the projector to its factory-default (original) settings. To restore the settings in a specific menu (such as the Image or...
Page 50 - Customizing Projector Features; Image Sizing; button on the remote control. See page 27 for more information.
50 Making Detailed Adjustments Customizing Projector Features Use the settings in this section to adjust the image size and position, suppress on-screen text, and select basic setup options. Image Sizing Before adjusting any of these settings, make sure you have already selected an appropriate aspec...
Page 51 - Screen Options; button to temporarily stop projection.; Other Setup Options; You can select different options for projecting the image:
Making Detailed Adjustments 51 ■ Zoom Caption Pos. Lets you adjust the shape and position of the image so that subtitles are visible (available only if the Aspect setting has been set to Zoom ). Adjust Overscan before changing the zoom position. Screen Options ■ Messages Turn this setting off if you...
Page 53 - Adjusting the LCD Alignment
Making Detailed Adjustments 53 ■ High Altitude Mode Adjusts the speed of the fan so it can properly cool the projector at higher altitudes. Turn this setting on if you are using the projector at an altitude of 4921 feet (1500 meters) or higher. Note: The maximum operating altitude is 7500 feet (2286...
Page 56 - Using HDMI Link; Setting Up HDMI Link; and set it to
56 Using HDMI Link Using HDMI Link When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control them using the HDMI Link control buttons on the projector’s remote control. This lets you use just one remote control to operate many commonly used features on all your ...
Page 57 - Changing HDMI Link Settings
Using HDMI Link 57 3. Press the HDMI Link button to exit the menu system. 4. Set up your connected devices so their HDMI CEC-compatible functions are enabled. For details, refer to the device manufacturer’s documentation. Changing HDMI Link Settings 1. Press the HDMI Link button on the projector’s r...
Page 58 - Cleaning the Lens; Clean the lens whenever you notice dirt or dust on the surface.
58 Maintenance Maintenance Your projector needs little maintenance. All you need to do on a regular basis is keep the lens clean. You also may need to clean the air filter to prevent overheating. Warning: Before cleaning any part of the projector, turn it off and unplug the power cord. Never open an...
Page 59 - Cleaning the 3D Glasses
Maintenance 59 Caution: Never rub the lens with abrasive materials. Use only lens cleaning fluids that are designed for cleaning optics. Avoid touching the lens with your bare hands to prevent fingerprints on or damage to the lens surface. Cleaning the 3D Glasses Use the included lint-free cloth (do...
Page 60 - Cleaning the Projector Case; Follow the steps below to maintain your projector’s air filter.; button on the remote
60 Maintenance Cleaning the Projector Case Before you clean the case, turn off the projector and unplug the power cord. ■ To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth. ■ To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent. Then wipe t...
Page 61 - or five times to remove loose dust from the air filter.; Use a small vacuum cleaner that is designed for computers and
Maintenance 61 3. Press in on the inner edge of the air filter cover to release the latch, then pull to remove the cover. 4. Remove the air filter as shown. 5. Gently tap both sides of the air filter against a hard surface four or five times to remove loose dust from the air filter. Note: Do not use...
Page 62 - on the inner edge of the cover to lock it into place, as shown below.; Replacing the Lamp; The projected image gets darker or starts to deteriorate.; appears on the screen when you start projecting.
62 Maintenance If the dirt is difficult to remove or the filter is broken, replace it. You can purchase air filter part number V13H134A39 from an authorized EPSON reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S. sales...
Page 63 - Follow these steps to replace the lamp:; Wait about an hour to make sure the lamp is no longer hot.
Maintenance 63 You can purchase lamp part number V13H010L69 from an authorized Epson reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales). Be sure to read the “Important Safety Info...
Page 65 - Resetting the Lamp Usage Timer
Maintenance 65 9. Replace the lamp cover. (The projector won’t work if the lamp cover is open or loose.) 10. Tighten the lamp cover screw. 11. Reset the lamp usage timer, as described on page 65. Resetting the Lamp Usage Timer After replacing the lamp, plug the projector back in, turn on the power s...
Page 66 - Checking the Projector Status; Storing the Projector
66 Maintenance Checking the Projector Status You can use the Info menu to view information about the current display settings and how long the projection lamp has been in use. To access the Info menu: 1. Press the Menu button on the projector or remote control. 2. Use the menu navigation buttons to ...
Page 67 - Transporting the Projector
Maintenance 67 Transporting the Projector Note: Epson shall not be liable for any damages incurred during transportation. The projector contains many glass and precision parts. When shipping the projector for repairs, use the original packaging material if possible. If you do not have the original p...
Page 68 - Problem Solving; If the projector isn’t working correctly, first press the; Lights indicating normal operation
68 Problem Solving Problem Solving This section explains how to interpret the projector’s status lights, solve problems with the picture and remote control, and contact technical support. What To Do When the Lights Come On or Flash The lights on top of the projector indicate the projector’s status a...
Page 69 - Lights indicating a problem
Problem Solving 69 Power light flashes blue, power button is on The projector is warming up. Wait for the picture to appear. The projector is cooling down. Wait until the power light stops flashing and remains off. Then press the P power button on the projector or the On button on the remote control...
Page 70 - Solving Picture Problems; You cannot turn on the projector.
70 Problem Solving Solving Picture Problems You cannot turn on the projector. ■ Make sure the power cord is connected and the power switch on the back of the projector is turned on. Then wait a moment for the P power button to light up before pressing the P power button on the projector or the On bu...
Page 71 - D content does not display or does not display correctly.
Problem Solving 71 3D content does not display or does not display correctly. ■ Press the 2D/3D button on the remote control to switch to 3D viewing mode, if necessary. ■ Make sure you are within the 3D viewing range (see page 11). ■ Make sure that the 3D glasses are fully charged and are paired wit...
Page 72 - The picture isn’t rectangular.
72 Problem Solving On most systems, the key lets you toggle between the LCD screen and the projector, or display on both at the same time. Allow a few seconds for the projector to sync up after pressing it. ■ If the function key doesn’t let you display simultaneously on both screens, you might need ...
Page 73 - The picture is blurry.
Problem Solving 73 The picture is blurry. ■ Make sure the Input Signal is set correctly for your video equipment (see page 52). ■ There may be dirt on the lens. Clean the lens as described on page 58. ■ Adjust the focus (see page 26). ■ Make sure the lens is not fogged by condensation. If you’ve jus...
Page 74 - Solving Remote Control Problems; The projector doesn’t respond to remote control commands.
74 Problem Solving Solving Remote Control Problems The projector doesn’t respond to remote control commands. ■ Make sure you’re within about 32 feet (10 m) of the projector, and the remote control is aimed at the projector’s front or back sensor within the ranges shown below. ■ You may need to repla...
Page 75 - Where to Get Help; Internet Support
Problem Solving 75 Where to Get Help Internet Support Epson provides technical assistance 24 hours a day at epson.com/support (U.S.) or epson.ca/support (Canada). Here you can access troubleshooting information, download product documentation, and receive technical advice through email. Speak to a S...
Page 76 - Specifications; General
76 Specifications Specifications General Type of display Poly-silicon TFT active matrix Size of LCD panels 0.74 inch (18.8 mm) wide Lens F=2.00 to 3.17 Resolution (native format) 1920 × 1080 pixels, 1080p Brightness Normal mode:White light output up to 2400 lumens (ISO 21118 standard)Color light out...
Page 77 - Dimensions
Specifications 77 Dimensions Height 5.6 inches (140 mm), not including adjustable feet Width 18.4 inches (466 mm) Depth 15.6 inches (395 mm) Weight 18.4 lb (8.3 kg) Electrical Rated frequency 50/60 Hz AC Power supply 100 to 120 V AC: 3.7 A 200 to 240 V AC: 1.6 A Power consumption 100 to 120 V AC: Op...
Page 78 - Compatible Video Formats
78 Specifications Canada ICES-003 Class BCSA C22.2 No. 60950-1-07 Pixelworks DNX ™ ICs are used in this projector. Compatible Video Formats The projector supports analog video in NTSC, PAL, and SECAM formats, and it automatically adjusts to the incoming signal. It can receive these formats as compos...
Page 80 - ESC/VP21 Command Codes
80 Specifications 3D mode 3D format ESC/VP21 Command Codes You can use an AV controller with a 9-pin null modem serial cable to control the projector. You can download the complete ESC/VP 21 Communication Manual for home theater projectors from the Epson website at epson.com/support (U.S.) or epson....
Page 81 - Notices; Important Safety Information
Notices 81 Notices Important Safety Information Follow these safety instructions when setting up and using the projector: ■ Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. ■ If you or any viewe...
Page 83 - FCC Compliance Statement; For United States Users
Notices 83 ■ Allow the lamp to cool for one hour before replacing it. ■ Unplug the projector during lightning storms or when not in use for extended periods. ■ Don’t place the projector or remote control on top of heat-producing equipment. ■ If you use the projector in a country other than where you...
Page 84 - WARNING; Copyright Notice
84 Notices WARNING The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and...
Page 85 - Trademarks
Notices 85 Trademarks EPSON, PowerLite, and C 2 Fine are registered trademarks, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark, DigiScan and AccuCinema are trademarks, and Extra Care is a service mark of Epson America, Inc. HDM...
