Epson NX530- Quick Guide
Epson NX530– Quick Guide, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Start Here
3
Slide the edge guide to your paper size.
Letter-size
4
Load paper against the edge guide with the glossy or
printable side facedown.
Note:
Make sure the paper is loaded against the edge guide
and not sticking out from the end of the cassette.
5
Slide the edge guides against the edges of the paper,
but not too tightly.
6
Keep the cassette flat as you insert it.
Note:
The paper may slide forward slightly as you insert the
cassette. This is normal.
7
Extend the output tray and flip up the paper stopper.
Note:
Do not flip up the paper stopper if you’re using
legal-size paper.
Read these instructions before using your product.
1
Unpack
French control
panel stickers
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
2
Turn on and adjust
1
Connect the power cord to the back of the printer and to an
electrical outlet.
Caution:
Do not connect to your computer yet.
2
Press the
On
button, then raise the control panel.
Note:
If you want to lower the control panel, squeeze the release
bar underneath and push the control panel down.
Caution:
To avoid damaging your product, always squeeze the
release bar to lower the control panel.
3
Select language
Press or to select your language, then press
OK
.
4
Install ink cartridges
1
Lift up the scanner unit.
2
Open the cartridge cover.
3
Shake the ink cartridges gently 4 or 5 times, then
unpack them.
4
Remove only the yellow tape from each cartridge.
Caution:
Don’t remove any other seals or the cartridges may leak.
5
Insert the cartridges in the holder for each color.
6
Press each cartridge down until it clicks.
7
Close the cartridge cover. Press down until it clicks. Then
lower the scanner unit and press
OK
.
8
Wait while the ink delivery system primes. Priming takes
about 5 minutes.
Note:
Your printer ships with full cartridges and part of the ink from
the first cartridges is used for priming the printer.
Caution:
Don’t turn off the printer while it is priming or you’ll
waste ink.
9
When you see this menu on your product’s LCD screen, do
not make a selection yet. Continue with the instructions in
the following sections to load paper in your product and
install software.
5
Load paper
1
Pull out the paper cassette at the bottom of the printer.
2
Slide the edge guides to the sides of the cassette.
*412184600*
*412184600*
Epson Stylus
®
NX530
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
