Epson EH-TW5900- User Manual

Contents 4 Organization of the Guide andNotations in the Guide Using Each Guide . . . . . . . . . . . . . . . . . . . . . 1 Notations Used in This Guide . . . . . . . . . . . 2 Safety Indications . . . . . . . . . . . . . . . . . . . . . . . 2 General Information Indications . . . . . . . . . . . . ...

Contents 5 Setting Auto Iris . . . . . . . . . . . . . . . . . . . . . . . . 36 Viewing the Image at the Saved ImageQuality (Memory Function) . . . . . . . . . . . 38 Saving Function . . . . . . . . . . . . . . . . . . . . . . . . 38 Saving a Memory . . . . . . . . . . . . . . . . . . . . . . . 38 L...

Contents 6 Lamp replacement period . . . . . . . . . . . . . . 79 Replacing Consumables . . . . . . . . . . . . . . . . . . 80 Replacing the air filter . . . . . . . . . . . . . . . . . 80 Replacing the lamp . . . . . . . . . . . . . . . . . . . 81 Resetting lamp hours . . . . . . . . . . . . . . . ...

Introduction 7 Projector Features Dynamic 3D Display Enjoy 3D contents on Blu-ray and images filmed with a 3D camera through a stunning projection display. s p.41 You need 3D Glasses to view 3D images. s p.41 Selecting Modes to Match what you are Watching (Color Mode) By simply selecting the Color M...

Introduction 8 Conforms to Wireless Transmissions for the WirelessHD Standards (EH-TW6000Wonly) The projector can wirelessly receive data and control signals for images and audio from WirelessHDcompatible devices. Because devices do not need to be connected directly to the projector via a cable, the...

Introduction 9 Part Names and Functions Front/Top Name Function a Lamp cover Open when replacing the projector's lamp. s p.81 b Air exhaust vent Exhaust vent for air used to cool the projector internally. Caution While projecting, do not put your face or hands near the air exhaust vent,and do not pl...

Introduction 10 Control Panel Buttons/Indicators Function a Brightness sensor Detects the brightness of the room. When Color Mode is set to "Auto", theoptimum image quality is set according to the brightness detected by the sen-sor. s p.29 b Operation indicator Flashes to indicate warm-up in...

Introduction 11 Rear Name Function a Speaker The projector's built-in speaker. Outputs audio.Set Inverse Audio to On to use the built-in speaker when the projector is suspended from a ceiling. s Settings - Audio - Inverse Audio p.61 b Power inlet Connects the power cable. s p.22 c Remote receiver Re...

Introduction 12 Base Name Function a Ceiling mount fixingpoints (four points) Attach the optional ceiling mount here when suspending the projector from aceiling. s p.84 b Front adjustable foot When setup on a surface such as a table, extend the foot to adjust the height. s p.26

Introduction 13 Remote Control Button Function a Turns the projector on. s p.22 b Turns the projector off. s p.23 c The remote control buttons light up for ap-proximately 10 seconds. This is useful whenoperating the remote control in the dark. d Changes to the image from each input port. s p.23 The ...

Introduction 15 Appearance Units: mm a Center of lens b Distance from center of lens to suspension bracket fixing point

Preparing 16 Setting Up Various Projection Methods Warning • A special method of installation is required when suspending the projector from a ceiling (ceiling mount). Ifit is not installed correctly, it could fall causing an accident and injury. • If you use adhesives, lubricants, or oil on ceiling...

Preparing 17 Adjusting the Projection Size The size of the projection increases as the projector is moved away from the screen. Use the table below to setup the projector at the optimum position from the screen. The values given hereare for your reference only. B Distance from the center of the lens...

Preparing 18 Connecting to Devices Attention • Turn off the equipment you want to connect before connecting. If the equipment is on when you connect,it could cause a malfunction. • Check the shape of the cable's connector and the shape of the port, and then connect. If you force a connectorof a diff...

Preparing 19 Connecting to a Computer To project images from a computer, connect the computer using one of the following methods. When using a computer cable For audio connections, make sure you use an audio cable labeled "No resistance" to connect the 2RCA W stereo mini-plug. When using an ...

Preparing 20 Attention • If you use a USB hub, the connection may not operate correctly. Devices such as digital cameras and USBdevices should be connected to the projector directly. • Connect a digital camera using a USB cable specified for use with the device. • Use a USB cable less than 3 m in le...

Preparing 21 Preparing the Remote Control Installing the Remote Control Batteries Attention • Check the positions of the (+) and (-) marks inside the battery holder to ensure the batteries are inserted thecorrect way. • You cannot use other batteries except for the AA size manganese or alkaline. a R...

Basic Operations 22 Starting and Ending Projection Turning on the Projector and Projecting a Connect the power cable. Connect using the power cable supplied. b Remove the lens cover. c Turn on the connected equipment. d Turn the power on. Remote control Control panel c When Direct Power On is set to...

Basic Operations 23 If the Target Image is not Projected If the image is not projected, you can change the source using one of the following methods. Remote control Control panel Press the button for the target port. Press the button and select the target port. Press the button to confirm the select...

Basic Operations 25 Adjusting the Projection Screen Displaying the Test Pattern When adjusting the zoom/focus or the projection position just after setting up the projector, you can displaya test pattern instead of connecting video equipment. Press the button on the remote control to display the tes...

Basic Operations 26 Adjusting the Projector's Tilt If the projection screen is tilted (the left and right sides of the projector are at different heights) when theprojector is setup on a table, adjust the front foot so that both sides are level with each other. Correcting Keystone Distortion You can...

Basic Operations 28 Adjusting the Volume You can adjust the volume by using the buttons on the remote control or the buttons on the projector's control panel. Remote control Control panel c • You can also adjust the volume from the configuration menu. s Settings - Audio p.61 • Under normal condition...

Adjusting the Image 29 Basic Settings for Image Selecting the Projection Quality (Color Mode) You can obtain the optimum image quality to suit your surroundings when projecting. The brightness of theimage varies depending on the mode selected. a Press the button. c You can make settings from the con...

Adjusting the Image 30 Choices when projecting 2D images Mode Application Auto Sets the color mode automatically according to the surroundings. Dynamic Ideal for use in a bright room. This is the brightest mode, and reproduces shadow toneswell. Living Room Ideal for use in a bright room. Images are ...

Adjusting the Image 32 Absolute Color Adjustments Adjusting Hue, Saturation, and Brightness You can adjust the hue, saturation, and brightness for each of the R (red), G (green), B (blue), C (cyan), M(magenta), and Y (yellow) colors. Hue Adjusts the overall color of the image to be blue, green, or r...

Adjusting the Image 33 Adjusting the Gamma You can adjust slight coloration differences that may occur due to the device being used when the image isdisplayed. You can use one of the following three methods selected from the configuration menu. Setting Method Menu Settings Select and adjust the corr...

Adjusting the Image 35 c Press the button to return the adjustments to their default values. Skin Tone You can adjust the skin tone. Make adjustments if the skin tone is too red or too green and so on. The menu is displayed in the following order. Image - Skin Tone Use the buttons to make adjustment...

Adjusting the Image 36 Detailed Image Adjustments Adjusting the Sharpness You can make the image clearer. It cannot be adjusted when a computer image signal is being input. Thin Line Enhancement Details such as hair and patterns on clothing are enhanced. Thick Line Enhancement Rough parts such as ou...

Adjusting the Image 37 a Press the button. Remote control Control panel The configuration menu is displayed. b Select Image - Auto Iris . The Auto Iris adjustment screen is displayed. c Use the buttons to select the item, and then press the button to confirm the selection. d Press the button to clos...

Adjusting the Image 38 Viewing the Image at the Saved Image Quality(Memory Function) Saving Function You can save the adjustment values for some images and image quality settings in the configuration menufor later use (Save Memory). Because these saved adjustment values can be loaded from the remote...

Adjusting the Image 39 Loading a Memory a Press the button, and then select Load Memory . The Load Memory screen is displayed. b Select the target memory name. c • The color mode saved to the memory is displayed on the right. • Depending on the input signal, part of the loaded memory item may not be...

Useful Functions 41 Enjoying 3D Images Watching 3D Images When 3D data is received from the HDMI1, HDMI2, or WirelessHD (EH-TW6000W only) source, the image isautomatically projected in 3D. The following 3D formats are supported. • Frame Packing • Side by Side • Top and Bottom Using 3D Glasses Use th...

Useful Functions 42 Projecting 3D images a Connect an AV device capable ofplaying 3D images to the projector. b Turn on the AV device and theprojector, and then press the button. If the 3D image is projected automatically,you do not need to press any buttons. c • How a 3D image is perceived varies d...

Useful Functions 43 Viewing Area for 3D Images The projector is equipped with an internal 3D emitter that synchronizes with your 3D Glasses to view 3Dimages. This allows you to view 3D images within the range shown in the figure below. Use the optional External 3D IR emitter if you cannot view the 3...

Useful Functions 44 Caution About the 3D Glasses • Do not drop or press too forcefully on the 3D Glasses.If the glass sections and so on are broken, an injury could occur. Store the glasses in the soft glasses casesupplied. • Be careful of the edges of the frame when wearing the 3D Glasses.If it pok...

Useful Functions 45 Caution Watching 3D Images • If your eyes feel fatigued or uncomfortable when viewing 3D images, stop viewing immediately.Continuing to view the 3D images could cause you to feel unwell. • When viewing 3D images be sure to always wear 3D Glasses. Do not attempt to view 3D images ...

Useful Functions 46 Caution Lithium Coin Batteries • Only CR2032 lithium coin batteries can be used by this device. Do not attempt to use any other type ofbatteries.If the batteries are inversed by mistake, they could explode or leak, causing a fire, injury, or damaging thesurroundings. • Do not put...

Useful Functions 47 Changing Between Two Types of Images Split Screen You can project two different images at once, one on the left andone on the right. You can project these images at the same size,or make one larger or smaller than the other to view a sub imagewhile you are watching the larger mai...

Useful Functions 48 Changing the split screen settings You can change the source and the display size used for split screen display from the Split Screen Setup menu. a Press the button during split screen projection. The Split Screen Setup menu is displayed. c Press the button during split screen pr...

Useful Functions 49 HDMI Link HDMI Link Function When an AV device that meets the HDMI CEC standards is connected to the projector's HDMI port, you canperform linked operations such as linked power on and volume adjustment for the AV system from oneremote control. Also, when projecting images in Wir...

Useful Functions 50 c • To use the HDMI Link function, you must configure the connected device. See the documentationsupplied with the connected device for more information. • Even when using the WirelessHD Transmitter with Power On Link set to Device -> PJ or Bidirectional , if WirelessHD is set...

Useful Functions 51 Playing Back Image Data (Slideshow) Compatible Data The following types of files stored on USB storage devices such as USB memories, digital cameras, and so onthat are connected to the projector's USB port can be displayed as a slideshow. Slideshow compatible file types File Type...

Useful Functions 52 Display Settings for Image Files and Slideshow Operation Settings You can set the file display order and slideshow operations on the option screen. a Use the buttons to position the cursor over the folder where you want to set display conditions, and then press the button. Select...

Useful Functions 53 Connecting with WirelessHD (EH-TW6000WOnly) Installing and Connecting the WirelessHD Transmitter You can use the included WirelessHD Transmitter to wirelessly receive image and sound data as well as controlsignals. This eliminates the need to connect any cables to the projector, ...

Useful Functions 55 WirelessHD Transmission Range The following shows the communication transmission range for the WirelessHD. Horizontal direction Vertical direction (placed on a table and so on) Vertical direction (suspended from a ceiling) c • The wireless transmission range varies depending on t...

Configuration Menu 56 Configuration Menu Functions Configuration Menu Operations On the configuration menu, you can make adjustments and settings for Signal, Image, Input Signal, and so on. a Press the button. Remote control Control panel The configuration menu is displayed. b Use the buttons to sel...

Configuration Menu 57 c For items adjusted using an adjustment bar, such as the brightness level, you can press the button while the adjustment screen is displayed to return the adjustment value to its default value. Configuration Menu Table If there is no image signal being input, you cannot adjust...

Configuration Menu 58 Function Menu/Settings Explanation Power Con-sumption Normal, ECO You can set the lamp brightness to one oftwo settings.Select ECO if the images being projected are too bright. When ECO is selected, pow- er consumption during projection decrea-ses, and fan rotation noise is red...

Configuration Menu 60 Function Menu/Settings Explanation (Advanced) EPSON SuperWhite *2 *6 On, Off (This can only be set when the Color Mode is set to Auto , Natural , Cinema , or 3D Cinema and when receiving signal input from the HDMI1 orHDMI2 ports, or from WirelessHD.)Set this to On if you are ex...

Configuration Menu 61 Settings menu Function Menu/Settings Explanation Keystone H/V-Keystone V-Keystone -60 to 60 Performs vertical keystone correc-tion. s p.27 H-Keystone -60 to 60 Performs horizontal keystone cor-rection. s p.27 Auto V-Keystone On, Off Enables or disables Auto V-Key- stone . s p.2...

Configuration Menu 63 Function Menu/Settings Explanation Projection Front, Front/Ceiling, Rear, Rear/Ceiling Change this setting depending onhow the projector is installed. • Front : Select if you are projecting in front of the screen. • Front/Ceiling : Select if you are projecting in front of the s...

Configuration Menu 64 Function Menu/Settings Explanation Display Menu Position - Sets the position where the menu should be dis-played. Menu Color Color 1, Color 2 Selects the color for the top menu. • Color 1 : Black • Color 2 : Blue Messages On, Off Sets whether or not to display the following mes...

Configuration Menu 66 Split Screen menu Displayed by pressing the button during split screen projection. Function Menu/Settings Explanation Split Screen Screen Size Equal, Larger Left, Larger Right Changes the left and right screen sizes. s p.48 Source Left, Right PCVideoComponentHDMI1/HDMI2Wireless...

Troubleshooting 67 Problem Solving Reading the Indicators You can check the status of the projector from the flashing and lit , (operation indicators), o and m on the control panel. Refer to the following table to check the projector's status and how to remedy problems shown by theindicators. Indica...

Troubleshooting 68 Indicators Status Remedy (red) Lamp Error Lamp Failure There is a problem with the lamp, or it failed to turn on. • Disconnect the power cable, and then check if the lamp iscracked. s p.81 If it is not cracked, reinstall the lamp and turn on the power.If reinstalling the lamp does...

Troubleshooting 69 Indicators Status Remedy (blue) Projection in pro-gress The projector is operating normally. c • Under normal operating conditions, the o and m indicators are off. • When the Illumination function is set to Off , all indicators are off under normal projection conditions. s Extende...

Troubleshooting 70 Problems relating to images No images appear Check Remedy Is the projector turned on? Press the button on the remote control or the button on the control panel. Is the power cable connected? Connect the power cable. Are the indicators switched off? Disconnect and then reconnect th...

Troubleshooting 74 Problems when projection starts The projector does not turn on Check Remedy Is the power turned on? Press the button on the remote control or the button on the control panel. Is Child Lock set to On ? When Child Lock is set to On from the configuration menu, hold down the button o...

Troubleshooting 75 Check Remedy Is 3D Display set to Off ? If 3D Display is set to Off from the configuration menu, the pro- jector does not automatically change to 3D even when a 3D im-age is input. Press the button. s Signal - 3D Setup - 3D Display p.58 Is the correct 3D format set? The projector ...

Troubleshooting 76 Check Remedy Is WirelessHD set to Off ? When WirelessHD is set to Off from the configuration menu, projection is not possible for WirelessHD input signals. Set Wire- lessHD to On , and then press the button. s Settings - WirelessHD p.61 Are signals being received within the Wire-l...

Maintenance 77 Maintenance Cleaning the Parts You should clean the projector if it becomes dirty or if the quality of projected images starts to deteriorate. Warning Do not use sprays that contain flammable gas to remove dirt and dust from the projector's lens, air filter,and so on. The projector ma...

Maintenance 78 d Hold the air filter with the surfacefacing down and tap it 4 or 5 times toremove the dust. Turn it over and tap the other side in thesame way. Attention If the air filter is hit too hard, it maybecome unusable due to deformitiesand cracks. e Remove any dust remaining on the airfilte...

Maintenance 79 Cleaning the lens Use a commercially available cloth for cleaning glasses to gently wipe off dirt from the lens. Attention Do not rub the lens with harsh materials or handle the lens too roughly as it can easily become damaged. Cleaning the 3D Glasses Use the cloth supplied to gently ...

Maintenance 80 Replacing Consumables Replacing the air filter c Dispose of used air filters in accordance with your local laws and regulations.Material: Polypropylene a Press the button on the remote control or the control panel to turn offthe power, and then disconnect thepower cable. b Remove the ...

Maintenance 81 Replacing the lamp Warning When replacing the lamp because it has stopped illuminating, there is a possibility that the lamp may bebroken. If replacing the lamp of a projector that has been suspended from the ceiling, you should alwaysassume that the lamp is cracked, and remove the la...

Maintenance 82 g Tighten the lamp fixing screw. h Install the lamp cover. Slide the cover back into place. i Tighten the lamp cover fixing screw. Warning Do not disassemble or remodel the lamp. Caution • Make sure you install the lamp and lamp cover securely. If they are not installed correctly, the...

Maintenance 83 c Select Reset - Reset Lamp Hours . A reset confirmation message is displayed. d Use the buttons to select Yes , and then press the button to execute. The lamp hours are reset.

Appendix 84 Optional Accessories and Consumables The following optional accessories/consumables are available for purchase if required. This list of optionalaccessories/consumables is current as of: 2011.7. Details of accessories are subject to change without notice. Varies depending on country of p...

Appendix 85 Supported Resolutions Component Video Signal Refresh Rate (Hz) Resolution (dots) SDTV (480i) 60 720 x 480 SDTV (576i) 50 720 x 576 SDTV (480p) 60 720 x 480 SDTV (576p) 50 720 x 576 HDTV (720p) 50/60 1280 x 720 HDTV (1080i) 50/60 1920 x 1080 HDTV (1080p) 50/60 1920 x 1080 Composite Video ...

Appendix 86 HDMI1/HDMI2 Input Signal Signal Refresh Rate (Hz) Resolution (dots) VGA 60 640 x 480 SDTV (480i) 60 720 x 480 SDTV (576i) 50 720 x 576 SDTV (480p) 60 720 x 480 SDTV (576p) 50 720 x 576 HDTV (720p) 50/60 1280 x 720 HDTV (1080i) 50/60 1920 x 1080 HDTV (1080p) * 24/50/60 1920 x 1080 * When ...

Appendix 87 Specifications Product name EH-TW6000W/EH-TW6000/EH-TW5900 Appearance (not including adjustablefoot) 420 (W) x 137.3 (H) x 365 (D) mm Panel Size 0.61" wide Display method Polysilicon TFT active matrix Resolution 1920 (W) x 1080 (H) x 3 Scanning Fre-quency Digital Pixel Clock: 13.5 - ...

Appendix 88 Обладнання відповідає вимогам Технічного регламенту обмеження використання деяких небезпечнихречовин в електричному та електронному обладнанні. Angle of tilt If you use the projector tilted at an angle of more than 10° it could bedamaged or cause an accident. RS-232C Cable layouts • Conn...

Appendix 90 Glossary This section briefly explains the difficult terms that are not explained in context in the text of this guide. Fordetails, refer to other commercially available publications. HDCP HDCP is an abbreviation for High-bandwidth Digital Content Protection. It is used to pre-vent illeg...

Appendix 91 General Notes All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmittedin any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the priorwritten permission of Seiko Epson Corporation. No pat...

Index 92 2 2-2 Pull-down ................................................. 59 3 3D brightness ................................................. 583D display ......................................................... 583D emitter ........................................................ 433D format ......