Epson BrightLink 450Wi- User Manual

Welcome 11 ■ PrivateLine ® support If you still need help after checking this User’s Guide and the sources listed in this section, you can use the Epson PrivateLine Support service to get help fast. Call (800) 637-7661 and enter the PIN on the PrivateLine card. Or take advantage of Epson’s automated...

12 Welcome Unpacking the Projector After unpacking the projector, make sure you have all these parts: Projector BrightLink 450Wi CD Power cord VGA computer cable Security sticker 2 AA batteries (for remote control) Epson Projector Software for Meeting and Monitoring CD Remote control Interactive pen...

Welcome 13 Unpacking the Mounting Hardware After unpacking the setting plate and mounting hardware, make sure you have all these parts: See the Installation Guide for instructions on mounting the projector on a wall. Save all packaging in case you need to ship the projector. Always use the original ...

14 Welcome Projector Parts Control panel Remote receiver Lamp cover screw Projection window Security cable attachment Air exhaust vent Cable cover Wireless LAN module slot Lamp cover Speaker Remote control receiver Kensington security slot Focus lever Air filter cover Air filter Filter cover switch ...

Welcome 15 Base Connection Panel Wall mounting slide plate Security cable attachment Audio out port Computer1 input and audio jack Audio in ports S-Video port Video port USB (TypeB) port RS-232C port AC power inlet Microphone jack Computer2 input and audio jack Monitor out port LAN port USB (TypeA) ...

16 Welcome Projector Control Panel Interactive Pens Power light Lamp and Temperature warning lights Source Search button (searches for connected video sources) Menu button (displays projector menus) Help button Enter button (selects menu items) Keystone button (corrects screen shape) Esc button (exi...

Welcome 17 Remote Control Power button Source Search and Source buttons (select image source) A/V Mute button (turns off image and audio) Freeze button (stops image) Aspect button (changes screen size) Color Mode button (changes display mode) Num button (activates number buttons) Page Up/Down button...

18 Welcome Projector Dimensions Use the dimensions below to guide you in placing or installing the projector. 0.22 in. (5.5 mm) 14.5 in. (369 mm) 11.5 in. (292 mm) 19.0 in. (483 mm) 6.7 in. (170 mm) 7.0 in. (177 mm) With slide plate 0.33 in. (8.3 mm)

20 Welcome Additional Components Depending on how you plan to use the projector, you may need additional components: ■ To receive a component video signal from a DVD player or other video device, you’ll need a component-to-VGA video cable. One may be included with your video equipment, or you can pu...

24 Connecting to Computers, USB Devices, and Other Equipment Connecting to a Computer You can connect the projector to any computer that has a standard video output (monitor) port. This connection is recommended for use with the interactive pens. See the next section for instructions. You can also c...

Connecting to Computers, USB Devices, and Other Equipment 25 2. You may need to change the Input Signal setting in the projector’s Signal menu to RGB or Auto (see page 74). 3. You can connect an optional stereo mini-jack audio cable to play sound through the projector (see page 33) or connect a micr...

Connecting to Computers, USB Devices, and Other Equipment 27 8. You can connect an optional audio cable if you want to play sound through the projector (see page 33). When you’ve finished making connections, see page 43 for instructions on displaying and adjusting the image. 9. When you’re done proj...

28 Connecting to Computers, USB Devices, and Other Equipment 2. Connect the flat end of the cable to any available USB port on your notebook or desktop computer. A USB 2.0 port is recommended for the best performance. 3. Set the USB Type B setting in the projector’s Extended menu to Wireless Mouse (...

Connecting to Computers, USB Devices, and Other Equipment 29 Connecting to Video Equipment You can connect several video sources to the projector at the same time. Before starting, look at your video equipment to determine its available video output connections: ■ If your video player has a yellow R...

30 Connecting to Computers, USB Devices, and Other Equipment 3. When you’ve finished making connections, see page 40 for instructions on turning on the projector and page 43 for instructions on displaying and adjusting the image. Once the projector is turned on, select the image source by pressing t...

Connecting to Computers, USB Devices, and Other Equipment 31 Connecting a Component Video Source If your video equipment has component video connectors (three connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you will need a component-to-VGA video cable or a component video cable and adapter. You can o...

32 Connecting to Computers, USB Devices, and Other Equipment Connecting an RGB Video Source You can connect to an RGB video source using the VGA computer cable provided with the projector. 1. Connect the cable to the RGB video port on your player and the Computer1 or Computer2 port on the projector....

Connecting to Computers, USB Devices, and Other Equipment 33 Playing Sound Through the Projector You can play sound through the projector’s speaker system or attach an external speaker system. You can also connect a microphone and output sound through the projector. You can use the or Volume buttons...

34 Connecting to Computers, USB Devices, and Other Equipment Playing Sound from Video Equipment For video equipment, use an RCA-style audio cable, which you can purchase from an electronics store. 1. Connect the red and white plugs on one end of the cable to the L and R Audio jacks on the projector....

Connecting to Computers, USB Devices, and Other Equipment 35 Connecting a Microphone You can connect a dynamic microphone to the projector’s Mic port, using a 3.5 mm mini-jack cable as shown below. Use the Mic Input Level option on the Settings menu to adjust the volume. See page 76 for more informa...

36 Connecting to Computers, USB Devices, and Other Equipment Connecting External Speakers You can output sound from the projector to external speakers with a built-in amplifier. 1. Locate the appropriate cable to connect your speakers. Depending on your speakers, you may be able to use a standard au...

Connecting to Computers, USB Devices, and Other Equipment 37 Connecting a Document Camera or Other USB Device You can connect an interactive whiteboard, document camera, USB thumb (flash memory) drive, USB hard drive, or multimedia storage viewer, such as the Epson P-7000. You can use the projector’...

40 Displaying and Adjusting the Image Turning the Projector On and Off Turn on any connected computer or video equipment before starting the projector so it can automatically detect and display the image source. If you turn on the projector first, or have multiple pieces of connected equipment, you ...

Displaying and Adjusting the Image 41 2. Press the P power button on the projector or on the remote control. The projector beeps once and the P power light flashes green as the projector warms up, then an image begins to appear. When the P power light stops flashing and remains green, the projector ...

42 Displaying and Adjusting the Image Shutting Down the Projector This projector incorporates Instant Off technology. To turn it off, you can press its P power button as described below, unplug it, or turn off a power switch that supplies power to the projector. You don’t have to wait for the projec...

Displaying and Adjusting the Image 43 Selecting an Image Source You may need to select the image source if you have multiple image sources connected to the projector (such as a computer or DVD player). Selecting the image source lets you switch between images input from different pieces of connected...

44 Displaying and Adjusting the Image Focusing the Image Focusing the projector is part of the installation process. If necessary, you can re-adjust the focus at any time using the focus lever next to the air filter on the side of the projector. 1. Slide the switch to open the air filter cover on th...

Displaying and Adjusting the Image 45 Selecting the Color Mode The Color Mode adjusts the brightness, contrast, and color for various common viewing environments. Use this setting to quickly obtain a good picture. Press the Color Mode button on the remote control to select an option. Press it until ...

46 Displaying and Adjusting the Image Resizing Video Images You can resize your images by changing the aspect (width to height) ratio (depending on your input signal). Press the Aspect button on the remote control. Press the Aspect button repeatedly to cycle through the available options. Select fro...

47 3 Using the Interactive Pens T he interactive pens included with your projector turn almost any wall into an interactive whiteboard. This chapter tells you how to use the Easy Interactive Driver software, calibrate the projector, and use the pens to annotate presentations or write and draw on a v...

48 Using the Interactive Pens Using the Easy Interactive Pen Driver The Easy Interactive Driver software is included on the CD labeled “Epson Projector Software for Easy Interactive Function.” Note the following system requirements: ■ Microsoft ® Windows 2000, Windows XP, Windows Vista or Windows 7 ...

Using the Interactive Pens 49 If a red X appears on the icon, the computer and projector are not connected correctly. Try removing and reconnecting the USB cable. If you don’t see the icon, do one of the following: Windows: select or Start > All Programs or Programs > Epson Projector > Easy...

Using the Interactive Pens 51 5. Continue until all of the circles are black. After you have finished calibration, you can use either pen as a mouse on the projection board or wall. With additional software, you can also use the pens to write or draw on the projected image. See the next section for ...

Using the Interactive Pens 53 In interactive mode, you can use the pen to operate your computer, as described on page 51. ■ To switch to annotation mode, select any of the drawing tools described on page 54. Or, select the mouse icon in the upper left corner. ■ To switch to whiteboard mode, select t...

Using the Interactive Pens 55 Using Whiteboard Mode To switch to a white screen that you can use as an interactive whiteboard, select the whiteboard icon. You see the whiteboard tools, as shown below. Select the icon to display additional tools. Some of the tools are the same as those available in i...

56 Using the Interactive Pens Saving Your Pages You can save both whiteboard pages and computer screen images with annotations. You can also decide where you want to save your pages and in what format. 1. Select the icon in your taskbar (lower right-hand corner of the screen) to open the Easy Intera...

60 Presenting With the Remote Control Using the Remote Control Make sure batteries are installed as described on page 119. Follow these tips for using the remote control: ■ Point the remote control at the projector or at the screen. ■ Stand within 19.7 feet (6 meters) of the projector. ■ Aim the rem...

Presenting With the Remote Control 61 Stopping Action Press the Freeze button on the remote control to stop the action in your video or computer image. The image freezes but the sound continues. To restart the action, press the Freeze button again. Zooming In on Your Image You can zoom in on a porti...

62 Presenting With the Remote Control 4. While the image is enlarged, you can: ■ Use the arrow buttons to move around the screen. ■ Press the E-Zoom – button to zoom out. 5. Press the E SC button to return the image to its original size. Controlling the Volume To change the volume on the projector, ...

Presenting With the Remote Control 63 4. Select one of the patterns shown on page 62, or choose Test Pattern . If you want to create your own pattern, choose User Pattern . See below for more information. 5. Press Enter to select the pattern you want, then press Esc . 6. Choose Pattern Display to di...

Presenting With the Remote Control 65 Then you can control your computer as follows: ■ Use the remote control’s Page Up or Page Down buttons to move through presentation slides. ■ Use the arrow buttons to move the cursor on the screen. ■ Press the Enter button once to left-click, or twice to double-...

66 Presenting With the Remote Control Customizing the Pointer Tool You can change the appearance of the pointer by choosing from three alternative shapes. 1. Press the Menu button on the remote control, highlight the Settings menu, highlight Pointer Shape , and press Enter . You can select one of th...

68 Presenting With the Remote Control ■ If all the images in a folder do not fit on the Slideshow screen, highlight Next page at the bottom of the screen and press Enter to display the next screen full of images. Select Previous page at the top of the screen to select the previous screen. ■ To exit ...

69 5 Using the Projector Menus Y ou can use the projector’s on-screen menus to adjust the image, sound, and other features. This chapter covers the following information: ■ Using the menu system ■ Adjusting the image ■ Adjusting signal settings ■ Customizing projector features ■ Customizing power an...

70 Using the Projector Menus Using the Menu System You can use the remote control or the projector’s control panel to access the menus and change settings. Follow these steps: 1. To display the menu screen, press the Menu button on the remote control or on the projector. You see a menu screen simila...

Using the Projector Menus 71 5. After changing the settings, press the Esc button to save your changes and return to the previous menu (or press it again to exit the menu system). You can also press the Menu button to exit. Restoring the Default Settings You can use the Reset option on any menu to r...

Using the Projector Menus 73 Adjusting Signal Settings Although the projector normally detects and optimizes the input signal automatically, you can use the Signal menu to make manual adjustments. In addition to changing the position of the projected image, you can correct tracking and sync for comp...

Using the Projector Menus 75 Customizing Projector Features You can use the Settings menu to lock the buttons on the projector, adjust audio volume, and customize several other features. ■ Keystone Adjusts the shape of the image if the projector has been tilted upward or downward. If you notice that...

Using the Projector Menus 77 Customizing Power and Operation You can use the Extended menu to customize the way the projector displays images, enable Direct Power On, use closed captioning, turn sleep mode on or off, and customize other projector operations. ■ Display Messages: Lets you turn screen ...

Using the Projector Menus 79 Using the Projector Security Features To prevent unauthorized use of the projector, you can: ■ Assign a password. You can use the password to prevent the projector from being turned on and prevent your custom startup screen from being changed. See the next section. ■ Cre...

80 Using the Projector Menus ■ Power On Protect : Prevents unauthorized use of the projector. After the projector is plugged in and turned on, you must enter a password to use the projector. Select On , press Enter , then press Esc to return to the Password Protect screen. ■ User’s Logo Protect : Pr...

Using the Projector Menus 81 The password screen closes and projection begins. If projection does not begin, check the following: ■ If the password is not correct, you see a message prompting you to re-enter the password. If you enter an incorrect password three times in succession, you see an error...

82 Using the Projector Menus Capturing the Image Start by displaying the image you want to use from either a computer or video source, such as a DVD player or digital camera. Then follow these steps to capture the image and transfer it to the projector: 1. Press the Menu button on the remote control...

Using the Projector Menus 83 Choosing When to Display the Image After your image is saved, you can set it to display as the startup screen, the screen you see when there’s no signal, or the screen you see when you press the A/V Mute button (see page 60). 1. Press the Menu button, highlight the Exten...

84 Using the Projector Menus 5. Press the Menu button to exit. To disable the Control Panel Lock function, select Off in the Control Panel Lock menu. Or press and hold the Enter button on the projector’s control panel for seven seconds. A message is displayed and the lock is released. Using Security...

86 Using the Projector on a Network Projection Operation Guide for instructions on installing the software. The guide also contains instructions on using the software to project over the network. If you want to use the interactive pens while projecting through a wired or wireless network, you must s...

Using the Projector on a Network 87 4. Press the LAN button on the remote control to select network as the source. 5. Press the Menu button on the remote control, select the Network menu, then press Enter . 6. Choose Network Configuration and press Enter . 7. Select the Wired LAN menu and press Ente...

Using the Projector on a Network 91 Using Quick Wireless Connection Using the optional Quick Wireless Connection USB key, you can connect the projector to a Windows computer wirelessly without any configuration. First, make sure you have installed the wireless module as described on page 89 and turn...

Using the Projector on a Network 93 7. If you want to create a password for remote access to the projector, highlight Web Control Password , press Enter , and enter a password of up to 8 alphanumeric characters. When you’re done, highlight Finish and press Enter . 8. If you want to set up a security...

94 Using the Projector on a Network Configuring the Projector 1. Press the Menu button, then choose Network and press Enter . 2. Choose Network Configuration and press Enter . 3. Choose Wireless LAN and press Enter . You see this screen: 4. Make sure Wireless LAN Power is set to On . You can turn it...

96 Using the Projector on a Network 11. When you’re done making these settings, press Esc . Choose Complete and press Enter , then choose Yes and press Enter to save your settings. Now you’re ready to select the wireless network your computer, as described below. Selecting Wireless Network Settings ...

Using the Projector on a Network 97 Using Wireless Security Options The projector includes WEP and WPA data encryption security options which you can enable for network projection. Make sure the settings you select match the ones used by your network; follow the directions from your network administ...

Using the Projector on a Network 99 10. When you’re done making these settings, press Esc . Choose Complete and press Enter , then choose Yes and press Enter to save your settings. Enabling WPA Security 1. Press Menu . Highlight Network and then press Enter . 2. Choose Network Configuration and pres...

Using the Projector on a Network 101 Using the EasyMP Software Once you’ve set up your projector and computer for network projection, see the EasyMP Network Projection Operation Guide for instructions on the following EasyMP features: ■ Starting EasyMP Network Projection ■ Projecting over the networ...

Using the Projector on a Network 103 Using SNMP to Monitor the Projector Network administrators can use SNMP (Simple Network Management Protocol) to monitor projectors. 1. Press the Menu button on the remote control, select the Network menu, then press Enter . 2. Choose Network Configuration and pre...

104 Using the Projector on a Network 7. If your network environment uses an AMX controller, select ON to allow the projector to be detected by AMX Device Discovery. 8. When you’re done making these settings, press Esc . Choose Complete and press Enter , then choose Yes and press Enter to save your s...

106 Using the Projector on a Network Using Web Remote Control When you access the projector through your browser, you can display a “virtual remote control” on your computer screen. This lets you change sources and perform many of the same functions as you can with the physical remote control. From ...

Using the Projector on a Network 107 ■ A/V Mute button temporarily turns off the picture and sound (see page 60). ■ The Page Up/Down buttons control PowerPoint slides (requires USB cable. See page 64). ■ The Volume buttons raise or lower the audio volume. ■ The CC (Closed Captioning) button lets you...

109 7 Maintaining the Projector Y our projector needs little maintenance. All you have to do on a regular basis is clean the lens, and check that the air filter and vents are clean. A clogged air filter or vent can block ventilation needed to cool the projector. The only parts you should replace are...

110 Maintaining the Projector Cleaning the Projection Window Clean the projection window whenever you notice dirt or dust on the surface. To remove dirt or smears on the window, use a commercially available cloth for cleaning glasses. Cleaning the Projector Case Before cleaning, turn off the project...

Maintaining the Projector 111 Cleaning the Air Filter Your projector includes an air filter to ensure the best performance and help protect your equipment investment. If dust collects on the air filter, clean it as described here. Dust clogs prevent proper ventilation and can cause overheating, whic...

Maintaining the Projector 113 4. Press in the new air filter until it clicks into place. Replacing the Lamp The life span of the projection lamp is about 2500 hours if Power Consumption in the Settings menu is Normal (default), and 3500 hours if this setting is ECO . See page 117 to check the lamp u...

Maintaining the Projector 117 Resetting the Lamp Timer After you replace the lamp, you need to reset the lamp timer using the projector’s menu system. 1. Press the Menu button on the remote control or on the projector’s control panel. You see the main menu. 2. Select the Reset menu and press Enter ....

118 Maintaining the Projector The life span of the lamp is about 2500 hours if Power Consumption in the Settings menu is Normal (default), and 3500 hours if this setting is ECO . Make sure you have a spare lamp handy if the usage hours on this menu are close to the life span of your lamp. Replacing ...

Maintaining the Projector 119 3. Replace the battery cover and press it down until it clicks into place. Replacing the Remote Control Batteries Replace the batteries in the remote as described below: 1. Turn the remote control over. 2. Press in on the catch on the battery cover as you lift the cover...

120 Maintaining the Projector 4. Replace the battery cover and press it down until it clicks into place. Transporting the Projector The projector contains many glass and precision parts. Follow these guidelines to prevent damage when transporting it: ■ When shipping the projector for repairs, use th...

121 8 Solving Problems T his chapter helps you solve problems with your projector and tells you how to contact technical support for problems you can’t solve yourself. The following information is included: ■ Using the projector’s on-screen help system ■ What to do when the projector’s status lights...

Solving Problems 123 Checking Projector Status If your projector isn’t working correctly, first turn it off and unplug it. Then plug the power cord back in and turn on the projector. If this doesn’t solve the problem, check the lights on top of the projector. What To Do When the Lights Flash The lig...

Solving Problems 125 Solving Projector Operation Problems The power doesn’t turn on. ■ If the projector doesn’t turn on when you press the P power button, make sure the power cord is connected to the projector and plugged into a working electrical outlet. ■ The power cord may be defective. Disconnec...

126 Solving Problems ■ If nothing is projected after the drivers are installed, do one of the following: Windows: Select or Start > All Programs or Programs > EPSON Projector > EPSON USB Display > EPSON USB Display Vx.x . Mac OS: Click the USB Display icon in the Dock. If you don’t see i...

128 Solving Problems If you’re using a PC notebook: ■ Press the function key that lets you display on an external monitor. It may have an icon such as , or it may be labelled CRT/LCD . You may have to hold down the Fn key while pressing it. Allow a few seconds for the projector to sync up after chan...

Solving Problems 129 The projector and notebook don’t display the same image If you’re projecting from a notebook, and you can’t see your image on the projection screen and on your computer at the same time, follow these guidelines. If you’re using a PC notebook: ■ On most systems, there’s a functio...

130 Solving Problems 4. Do one of the following: Mac OS X 10.6.x: Click Show displays in menu bar . Other versions of Mac OS X: Make sure the VGA Display or Color LCD dialog box is selected, click the Arrangement or Arrange tab, then make sure the Mirror Displays checkbox is selected. Only part of t...

Solving Problems 131 The image contains static or noise. ■ If you’re using a computer cable longer than 6 feet (1.8 meters), or an extension cable, the image quality may be reduced. ■ Keep your computer and video cables away from the power cord as much as possible to prevent interference. ■ The vide...

132 Solving Problems You see vertical bands or the image still looks blurry after trying the solutions in the previous section. ■ If you’re projecting from a computer and displaying an image that contains a lot of fine detail, you may notice vertical bands or some of the characters may look heavy or...

Solving Problems 133 ■ If you’re displaying video, adjust the Color Adjustment and Color Mode settings on the Image menu. You can also try adjusting the Color Saturation , Abs. Color Temp , and Tint settings on the Image menu. ■ Try adjusting the Brightness and Contrast settings on the Image menu. ■...

134 Solving Problems ■ If you’re using a DVD player or other video source, make sure the cables are connected correctly, as described on page 33. ■ If you are using a microphone connected to the projector’s Mic port, make sure the cable is connected securely and the Mic Input Volume on the Settings ...

Solving Problems 135 The pen doesn’t work. ■ Make sure nothing is blocking the signal between the pen and the interactive pen receiver on the projector (see page 14). ■ Make sure the cable cover is in place to keep cables from blocking the signal. ■ Make sure the pen batteries have enough power. If ...

136 Solving Problems You’re having trouble calibrating. ■ If the flashing circles don’t appear, make sure the VGA cable and USB cable are securely connected to the computer. Try restarting the Easy Interactive Driver, as described on page 134. ■ If the circles don’t stop flashing and turn black (or ...

138 Solving Problems ■ If you’re not using DHCP, check your projector’s Gateway address on the projector’s Access Point mode advanced settings screen. It should be identical to the IP address for your access point or AirPort base station. ■ If you’re using a projector keyword, it changes each time y...

Solving Problems 139 Solving Problems With the Remote Control The projector doesn’t respond to remote control commands. ■ Point the remote control towards the projector’s receiver. Make sure you are within 19.7 feet (6 meters) of the projector and within a 30° horizontal angle and a 15° vertical ang...

140 Solving Problems Where To Get Help Epson provides these technical support services: Internet Support Visit Epson’s support website in the US or Canada for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your qu...

Solving Problems 141 Before you call for support, please have the following information ready: ■ Product name (BrightLink 450Wi) ■ Product serial number (located on the bottom of the projector and on the Info menu) ■ Proof of purchase (such as a store receipt) and date of purchase ■ Computer or vide...

143 A Technical Specifications General Type of display Poly-silicon TFT active matrix Resolution(native format) 1280 × 800 pixels (WXGA) Color reproduction 16.8 million colors Light output(brightness) Normal mode: White light output 2500 lumens (ISO 21118 standard)Color light output 2500 lumens ECO ...

144 Technical Specifications Noise level 28 dB in ECO mode35 dB in Normal mode Keystone correction ± 5° Projection Lamp Type UHE (Ultra High Efficiency E-TORL ® ) Power consumption 230 W Lamp life Approx. 2500 hours (Normal mode)Approx. 3500 hours (ECO mode) Part number V13H010L57 Remote Control Ran...

Technical Specifications 145 220 to 240 V 257 W in ECO mode343 W Normal mode 0.3 W Standby (Communication Off)12 W Standby (Communication On) Environmental Temperature Operating: 41 to 95 °F (5 to 35 °C)Storage: 14 to 140 °F (–10 to 60 °C) Humidity(non-condensing) Operating: 20 to 80% RH Operating a...

149 B Notices T his appendix includes safety instructions and other important information about your projector. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not look into the lens when the projector is on. The bright light can damage yo...

152 Notices FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential...

Notices 153 Software Notices GNU GPL This projector product includes the open source software programs which apply the GNU General Public License Version 2 or later version ("GPL Programs"). We provide the source code of the GPL Programs until five (5) years after the discontinuation of same...

Notices 177 49 General Notes 147 mDNSResponder This projector product includes the open source software program "mDNSResponder" which applies the following license terms "Apache License Version 2.0, January 2004". List of "mDNSResponder" mDNSResponder-107.6 (only mDNSResponde...

181 Index A A/V Mute button, 60, 126display settings, 77, 83 Accessories, 20 to 21Adapter, audio, 34Air filter cleaning, 111ordering, 20replacing, 112 to 113 Altitude, 78, 124, 145Anti-theft device, 20, 84Aspect ratio, 46, 74, 143Audio adapter, 34cable, 33connecting equipment, 33 to 36controlling vo...