Epson 935W- Quick Guide

Quick Setup

Before using the projector, make sure you read the safety instructions in the
online

User’s Guide

.

Connect the projector

Choose from the following connections.

Computer

USB port

Connect the square end of a USB cable to the projector’s

USB

TypeB

(square) port. Connect the flat end of the cable to any USB port on

your computer.

Windows

®

XP or later:

After turning on the projector, follow

the on-screen instructions to install the Epson USB Display software
(EMP_UDSE.EXE; only on first connection).

Note:

If the software screen does not display automatically, open

My

Computer

or

Computer

, then double-click

EPSON_PJ_UD

. If it still does not

display, access the projector’s

Extended

menu and select

USB Display

as the

USB

Type B

setting. See the online

User’s Guide

for instructions.

Mac OS X 10.5.8 or higher:

After turning on the projector, the setup folder

for USB Display appears in the Finder. Double-click

USB Display Installer

and

follow the on-screen instructions to install the Epson USB Display software
(only on first connection).

Monitor port

Connect one end of a VGA cable to the projector’s

Computer1

or

Computer2

port, and the other end to your computer’s

monitor port. If you are using

a notebook, switch it to external display (see “Troubleshooting”). You can also
connect an audio cable.

Wireless network

You can connect the projector wirelessly over an 802.11b, 802.11g, or 802.11n
wireless network. See “Project wirelessly” for instructions.

Wired network

You can connect the projector to your network using an Ethernet cable. See

See

“Project over a wired network” on the back of this sheet for instructions.

Video device

Connect up to 5 video devices and use the

Source Search

button on the

projector or remote control to switch between them.

RCA video cable (composite video) 

Component video to VGA cable

Audio cable

S-Video cable 

Audio cable 

HDMI cable

Camera, USB device, or Epson DC-06 document

camera

Connect a digital camera, USB flash drive, USB storage device, or Epson
document camera DC-06 to the projector’s USB

TypeA

(flat) port.

If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector’s Slideshow feature. See the online

User’s Guide

for details.

External monitor, external speakers, and

microphone

You can also connect an external monitor, external speakers, and a microphone
to your projector to enhance your presentations. See the online

User’s Guide

for

details.

Turn on your equipment

1

Turn on your computer or video source.

2

Plug in the projector. The power light on the projector turns orange.

3

Open the

A/V Mute

slide all the way.

4

Press the

power button on the projector or remote control.

Power Button

Power Light

The power

light flashes green, then stays on.

Note:

To shut down the projector, press the

power button twice, then

unplug it. You don’t have to wait for the projector to cool down.

5

The default language of the menu system is

English

. To select another

language, press the

Menu

button on the remote control. Select

Extended

and press

Enter

. Select

Language

and press

Enter

. Select your

language and press

Enter

.

Press the

Menu

to exit the menu system.

Adjust the image

1

If you don’t see an image, press the

Source Search

button on the

projector or the remote control to select the image source.

Note:

If you still see a blank screen or have other display problems, see

the troubleshooting tips on the back of this sheet.

2

To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.

3

Turn the zoom ring to reduce or enlarge the image.

Zoom ring

4

Rotate the focus ring to sharpen the image.

Focus ring

5

If your image looks like

or

, you’ve placed the projector off to

one side of the screen at an angle. Place it directly in front of the center
of the screen, facing the screen squarely. Or press the or buttons on
the projector to correct it.

6

If your image looks like

or

, press the

or

buttons on the

projector to correct it.

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).

Choose which source 

to display

Turn projector 

on and off

Access projector 

menus

Turn off projector 

display and sound

Control projector 

volume

Navigate projector 

menus

For more information on using the remote control, see the online

User’s

Guide

.

Project wirelessly

Follow the steps here to connect the projector wirelessly over an 802.11b,
802.11g, or 802.11n wireless network. You must install the optional Epson
wireless LAN module (part number V12H418P12). Your computer must have
a wireless card or built-in wireless interface, and be running Windows 8,
Windows 7, Windows Vista

®

, Windows XP Professional x64, or Windows XP,

or Mac OS X 10.5.8 to 10.8.x.

1

Turn off the projector and unplug the power cord.

2

Slide the air filter cover latch and open the air filter cover.

3

Remove the screw securing the wireless LAN module stopper, then
remove the stopper.

4

Insert the wireless LAN module into the port.

PowerLite

®

935W

*412439300*

*412439300*