Page 3 - Federal Communications Commission (FCC) Notice
i Notice Enterasys Networks reserves the right to make changes in specifications and other information contained in this document and its web site without prior notice. The reader should in all cases consult Enterasys Networks to determine whether any such changes have been made. The hardware, firmw...
Page 4 - Industry Canada Notice; Product Safety
ii Industry Canada Notice This digital apparatus does not exceed the class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassa...
Page 5 - Declaration of Conformity; ONE-YEAR LIMITED WARRANTY
iii Declaration of Conformity Application of Council Directive(s): 89/336/EEC73/23/EEC Manufacturer’s Name: Enterasys Networks, Inc. Manufacturer ’s Address: 50 Minuteman Road Andover, MA 01810USA European Representative Address: Enterasys Networks, Ltd.Nexus House, Newbury Business ParkLondon Road,...
Page 6 - Firmware License Agreement
iv Enterasys Networks, Inc. Firmware License Agreement BEFORE OPENING OR UTILIZING THE ENCLOSED PRODUCT, CAREFULLY READ THIS LICENSE AGREEMENT. This document is an agreement (“Agreement”) between the end user (“You”) and Enterasys Networks, Inc. on behalf of itself and its Affiliates (as hereinafter...
Page 9 - Contents
vii Contents About This Guide Purpose ................................................................................................................................................ ixWho Should Use This Guide ............................................................................................
Page 11 - About This Guide; Purpose
Mid-Span Power Hub User’s Guide ix About This Guide Purpose This guide provides information and procedures on hardware installation, setup, configuration, and management of the Enterasys Networks 24-Port Mid-Span Power Hub. Who Should Use This Guide This guide is intended for administrative and tech...
Page 12 - Document Conventions
Document Conventions x About This Guide Document Conventions Throughout this guide the following symbols are used to call attention to important information. Getting Help For additional support related to the Mid-Span Power Hub or this document, contact Enterasys Networks using one of the following ...
Page 15 - Introduction; Functions and Features
Mid-Span Power Hub 24-Port User’s Guide 1-1 1 Introduction Functions and Features The BL-69524ENT, Enterasys Networks’ 24-port Mid-Span Power Hub, supports applications in which AC power is difficult to access, such as VoIP phones, wireless LAN access points, or IP network cameras. The Enterasys 24-...
Page 17 - Installation and Connection; Verifying the Kit
Mid-Span Power Hub 24-Port User’s Guide 2-1 2 Installation and Connection Verifying the Kit Unpack the unit and verify that you have all of the following items (see Figure 2-1 ): • Enterasys’ 24-port Mid-Span Power Hub • Power Cord • User ’s Guide Electrical Hazard: Only qualified personnel should i...
Page 18 - Kit Contents; Power Cord
Kit Contents 2-2 Installation and Connection Kit Contents Figure 2-1 Contents of the BL-69524ENT Kit Power Cord User’ s Guide BL-69524ENT 24-Port Mid-Span Power Hub
Page 19 - Technical Considerations; Configuration for the 24-Port Mid-Span Power Hub
Technical Considerations Mid-Span Power Hub 24-Port User’s Guide 2-3 Technical Considerations The Enterasys Networks 24-port Mid-Span Power Hub may be placed on a shelf or mounted in a standard 48.26-centimeter (19-inch) rack. Before you mount the unit to a fixed location, consider the following: • ...
Page 20 - Figure 2-2 Typical Configuration for a 24-Port Mid-Span Power Hub
Configuration for the 24-Port Mid-Span Power Hub 2-4 Installation and Connection Figure 2-2 Typical Configuration for a 24-Port Mid-Span Power Hub
Page 21 - Powering Up
Powering Up Mid-Span Power Hub 24-Port User’s Guide 2-5 Powering Up Simply plug one end of the power cord into the unit, and the other end into a grounded AC power source. Units are typically connected to a power strip or other power outlet that may be cycled on and off. An uninterruptible power sup...
Page 23 - Troubleshooting; Table 3-1 Troubleshooting Checklist
Mid-Span Power Hub 24-Port User’s Guide 3-1 3 Troubleshooting Refer to Table 3-1 for a checklist of problems and recommended actions to resolve the problem. If additional support is needed, refer to “ Getting Help ” on page x. Table 3-1 Troubleshooting Checklist Problem Recommended Action Unit is pl...
Page 24 - Problem
Troubleshooting 3-2 Troubleshooting The Mid-Span Power Hub operates and the load device works, but there is no data link. Verify that the Detect/Power Forwarding (blue) LED for the port is “on.” Verify that the Mid-Span Power Hub is connected to the Ethernet network with a good connection. Verify th...
Page 25 - Hardware Specifications; Regulatory Compliance Standards
Mid-Span Power Hub 24-Port User’s Guide A-1 A Hardware Specifications Regulatory Compliance Standards This equipment meets the following safety and electromagnetic compatibility (EMC) requirements: Product Standards This equipment meets the following product standards: Model BL-69524ENT • 24 female ...
Page 26 - Physical/Environmental Specifications
Model BL-69524ENT A-2 Physical/Mechanical Specifications Table A-1 provides physical and mechanical specifications for the 24-port Mid-Span Power Hub. LED Indicators/Module Table A-2 provides module LED states and their definitions. Physical/Environmental Specifications Table A-2 provides physical a...
Page 27 - Electrical Specifications; AC Power Input
Model BL-69524ENT Mid-Span Power Hub 24-Port User’s Guide A-3 Electrical Specifications AC Power Input DC Port Power Output Voltage 90–264 V autoranging (46 Hz–63 Hz) Connector 3-pin with ground Chassis grounding yes Power supply single Power enabling IEEE 802.3af Power pins Unused pairs, pins 4,5(+...
