Enforcer SK-910RC4Q - Manual
Enforcer SK-910RC4Q – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – ENFORCER SK-910RC4Q Central Receiver
- Page 3 – To open the housing:; Buttons and knobs are connected directly to the PCB.
- Page 4 – Display Channel Memory:; Code Learning a New Transmitter:; Alert Tones
- Page 5 – Programming Each Channel Output:; depending on the output time set.; Timed Output; Output Mode; Latch Output; If the present mode is Timed Output, and; Programming Button Functions (Per Channel)
- Page 6 – Setting the Timed Output:; Setting Auxiliary Relay Timer:
- Page 7 – Setting the Power LED:; Outside driveway
- Page 8 – WARRANTY
Manual
Central Receiver
SK-910RC4Q
Note: Model numbers that end with “Q” or that have a round green “Q” sticker signify RoHS-compliant products.
4 Channels
4 Channel relay outputs
1 Auxiliary relay output (12VDC)
4 Relay output modes
4 Programmable alert tones
Up to 500’ (152m) range
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
ENFORCER SK-910RC4Q Central Receiver 2 SECO-LARM U.S.A., Inc. Table of Contents: Introduction ..................................................... 2 Alert Tones ..................................................... 4 Specifications ................................................. 2 Programming Eac...
ENFORCER SK-910RC4Q Central Receiver SECO-LARM U.S.A., Inc. 3 Front: 1. Mount in a convenient location where alert tones and LED indicators will be audible/visible. 2. Do not install in a location surrounded by metal as RF signals may be blocked, decreasing range. 3. Do not install in a location exp...
ENFORCER SK-910RC4Q Central Receiver 4 SECO-LARM U.S.A., Inc. Display Channel Memory: 1. Press a channel’s programming button once. 2. The number of flashes is the same as the number of transmitters that channel has learned. Clear Channel Memory: 1. Hold down the channel’s programming button for thr...
