Enforcer SK-910R4-4Q - Manual

Enforcer SK-910R4-4Q – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

The SK-910R3Q and SK-910R4Q are wireless receivers that meet the growing demand for multi-channel receivers with
multiple and independently controlled output modes. RF receivers can be used to control a variety of home automation
devices such as garage door openers, lights, motorized gates, lifts, or other devices remotely.
These receivers are compatible with both fixed code and code hopping transmitters. Code hopping transmitters, such as
SECO-LARM CODEBUMP™ transmitters, change codes every time transmitter sends a signal for extra security. See page 4
of this manual for a list of compatible transmitters.

Mount the receiver out of sight in a location where it is not exposed to the weather or moisture, and where it is not
surrounded by metal. Metal will block the RF signal, resulting in a reduced range.

For best range, pull the antenna wire as long and straight as possible. If the receiver receives interference from local RF
activity (e.g., an airport or military base), the antenna wire can be folded. DO NOT CUT THE ANTENNA WIRE.

Installation Notes:

Introduction:



Flexible operating voltage: 11~24 VAC/VDC



Up to 500ft (152m) range



Independently programmable channels

Also Available from SECO-LARM:

Note: Products with model numbers that end with “Q” or that have a round green “Q” sticker are RoHS compliant.

This manual covers only the three- and four-channel receivers. For information on all other receivers, please contact SECO-LARM.

SK-910RBQ

............................................................... One-channel receiver, 315MHz

SK-910RLQ

........................................... Low-voltage, one-channel receiver, 315MHz

SK-910RVQ

......................................................... Low-voltage, one-channel receiver,

transistor ground output 315MHZ

SK-910R-4Q

......................................................... One-channel receiver, 433.92MHz

SK-910RL-4Q

................................... Low-voltage, one-channel receiver, 433.92MHz

SK-910RV-4Q

...................................................... Low-voltage, one-channel receiver,

transistor ground output, 433.92MHz

SK-910RB2Q

............................................................. Two-channel receiver, 315MHz

SK-910RB2-4Q

..................................................... Two-channel receiver, 433.92MHz

(SK-910R4Q pictured)

SK-910R3Q

3 Channels (315MHz)

SK-910R3-4Q

3 Channels (433.92MHz)

SK-910R4Q

4 Channels (315MHz)

SK-910R4-4Q

4 Channels (433.92MHz)

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - ENFORCER Three- and Four-Channel RF Receiver; Timed Output; Code Learning a New Transmitter Button:; Overview

ENFORCER Three- and Four-Channel RF Receiver 2 SECO-LARM U.S.A., Inc. Each receiver channel can be programmed for one of five different modes, and each individual channel may operate at a different output mode, depending on the user’s application. The five modes are: 1. Timed Output – Press the tran...

Page 3 - located on the RF receiver.

ENFORCER Three- and Four-Channel RF Receiver SECO-LARM U.S.A., Inc. 3 Transmitter Programming Button Operation (One per Channel): LED Indication (One per Channel): Extended Range Antenna (Optional): Extends RF receiver range up to 1,000ft (304m) (open air) with existing remotes. Comes with a 9ft cab...

Page 4 - Sample Applications:; Positive Output

ENFORCER Three- and Four-Channel RF Receiver 4 SECO-LARM U.S.A., Inc. WARRANTY This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is ...