Enforcer EV-1826-PKGQ - Manual
Enforcer EV-1826-PKGQ – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – ENFORCER 84-IR LED Bullet Cameras; Optional EV-11LS Single-Gang Mounting Plate; ENFORCER 84-IR LED Bullet Cameras can
- Page 3 – SECO-LARM U.S.A., Inc.; Do not cut the DC jack or female BNC plug
- Page 4 – IMPORTANT; product in violation of any current laws or statutes.; WARNING; correct the interference at his or her own expense.; NOTICE
84-IR LED Bullet Cameras
Note: Model numbers that end with “Q” or that have a round green “Q” sticker signify RoHS -compliant products.
Manual
EV-1826-NKGQ (NTSC)
EV-1826-PKGQ (PAL)
1
/
3
” Sony Super HAD II CCD
2.8~12mm Varifocal lens
Weatherproof (IP66)
OSD functions accessible with
optional OSD controller (EV-18C)
Optimized to produce clear
images at night
Cables concealed in bracket
12VDC operation
Optional single-gang mounting plate
and round junction box available
Use to access the OSD
(On-Screen Display)
functions for
compatible cameras
without having to be
near the camera.
For more information, please see the EV-18C manual.
Zeta Series
OSD Controller
Model No.
EV-18C
Not included.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
ENFORCER 84-IR LED Bullet Cameras 2 SECO-LARM U.S.A., Inc. Optional EV-11LS Single-Gang Mounting Plate (Sold separately) : Model # EV-1826-NKGQ EV-1826-PKGQ Type IR LED Bullet Camera CCD 1 / 3 ” Sony Super HAD II # of infrared LEDs 84 Lens 2.8~12mm Resolution 600 TV lines 600 TV Lines Pickup element...
ENFORCER 84-IR LED Bullet Cameras SECO-LARM U.S.A., Inc. 3 SECO-LARM U.S.A., Inc. 33 3 4 5 / 16 ” (109mm) 1. Run a 12VDC power supply wire and a video cable with a male BNC connector through the wall to where the camera is to be mounted. 2. Temporarily connect the camera to the 12VDC power supply. D...
ENFORCER 84-IR LED Bullet Cameras 4 SECO-LARM U.S.A., Inc. The screen is blank. Check that the camera is powered up. Check that the power supply’s polarity is correct. Check that the monitor is powered up. Check that the video cable connecting the camera to the monitor is connected properly....
