Enforcer EV-1626-NWGQ 6~50mm - Manual

Page 2 - On-Screen Display Manual; Electric shock may occur.; Precautions While Camera is in Use:; Always disconnect the power by removing; Precautions When Installing:; Only use the camera in conditions where; Do not touch the front lens.; Malfunctions may occur.; Do not expose the camera to radioactivity.

On-Screen Display Manual 2 SECO-LARM U.S.A., Inc. Precautions: PLEASE READ THIS MANUAL THOROUGHLY BEFORE USING THE CAMERA TO BECOME FAMILIAR WITH THE CORRECT OPERATIONAL PROCEDURES.  Do not open the camera body or touch any electrical parts. Electric shock may occur.  Do not insert objects into th...

Page 4 - SETUP MENU

On-Screen Display Manual 4 SECO-LARM U.S.A., Inc. Menu Diagram: SETUP MENU SETTINGS SETTING OPTIONS 1) LENS DC/MANUAL Range: 0~100 Level Adjustable 2) EXPOSURE SHUTTER (seconds) FLK, 1/60, 1/250, 1/500, 1/2000, 1/5000, 1/10000, 1/100000 BRIGHTNESS Range: 0~100 Level Adjustable AGC OFF / LOW / MIDDLE...

Page 5 - Special Menu Diagram:; SPECIAL MENU; CAMERA TITLE; DIGITAL–EFFECT; MOTION; RETURN

On-Screen Display Manual 5 SECO-LARM U.S.A., Inc. Special Menu Diagram: SPECIAL MENU DEFAULT SETTINGS SETTING OPTIONS 1) CAMERA TITLE OFF ON / OFF 2) DIGITAL–EFFECT OFF FREEZE / MIRROR / D-ZOOM / GAMMA / NEG. IMAGE 3) MOTION ON AREA SELEC: AREA 1~4 AREA DISPLAY: ON / OFF LEFT / RIGHT: 0~100 Level Ad...

Page 6 - Lens

On-Screen Display Manual 6 SECO-LARM U.S.A., Inc. Lens: This function controls the brightness of the image. 1. Move the arrow indicator to LENS using the UP and DOWN buttons on the SETUP menu screen. 2. Select the desired lens type by pressing the LEFT and RIGHT buttons. 3. Press RETURN to return to...

Page 8 - BLC OFF

On-Screen Display Manual 8 SECO-LARM U.S.A., Inc. BLC OFF BLC ON C. Select a mode using the LEFT and RIGHT buttons, then press the SET button. Select BLC to adjust the desired BLC area and GAIN level. GAIN: Adjust the BLC sensitivity. DEFAULT: Go back to factory setting. LEFT / RIGHT and TOP / BOTTO...

Page 11 - CAM TITLE; is displayed on the monitor.

On-Screen Display Manual 11 SECO-LARM U.S.A., Inc. Special: 1. Select SPECIAL by using the UP and DOWN buttons. 2. Select one of the modes by using the UP and DOWN buttons.  CAM TITLE : When input, the Camera ID is displayed on the monitor. A. Move the arrow indicator to CAMERA ID using the UP and ...

Page 12 - Factory Default; : Set to apply various digital; New Position; Cam Title, continued

On-Screen Display Manual 12 SECO-LARM U.S.A., Inc. E. To select the camera title position on screen, move the cursor to POS and press the SET button. F. Created camera title is displayed. G. Select a new position by using the four directional buttons. Press the SET button to confirm the position. H....

Page 13 - MIRROR OFF

On-Screen Display Manual 13 SECO-LARM U.S.A., Inc. MIRROR OFF MIRROR ON C. D-ZOOM: Digital zoom available. (1x~32x) PAN: -100~100 adjustable range. TILT: -100~100 adjustable range. D. GAMMA: 0.05~1.00 adjustable range. E. NEG. IMAGE: ON: Activates negative image. OFF: Normal image. F. RETURN: Return...

Page 14 - AREA SELECT: Determines the area

On-Screen Display Manual 14 SECO-LARM U.S.A., Inc.  PRIVACY : Hides desired on-screen area.  RETURN: Select RETURN to save the changes in the EXPOSURE menu and return to the SETUP menu. A. Set up the area mode using the four directional buttons. AREA SELECT: Determines the area selected. AREA DISP...

Page 16 - IMPORTANT; WARNING; NOTICE

On-Screen Display Manual 16 SECO-LARM U.S.A., Inc. IMPORTANT Users and installers of this product are responsible for ensuring this product complies with all national, state, and local l aws and statutes related to monitoring and recording audio and video signals. SECO-LARM will not be held responsi...

Enforcer EV-1626-NWGQ 6~50mm - Manual

Table of Contents:

Summary

Other Enforcer Models