Enforcer EAP-5D1 - Manual
Enforcer EAP-5D1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
AC power failure supervision relay.
Battery failure supervision relay.
Selectable 2.2K-Ohm End-of-Line (EOL) resistor for AC failure
and battery failure supervision relays.
Selectable delay timer (5 sec., 5 min., 5 hours) for AC failure
supervision relay.
LED overload indicator and automatic shutdown for short-
circuit protection.
Over-current fuse-protected AC input.
Built-in back-up battery charger
Automatically switch to back-up battery if AC fails.
Individual AC input and DC output LED status indicators.
1.949.261.2999 (CA & Int’l) 1.800.662.0800 Fax: 1.949.261.7326
Email: [email protected] Website: www.seco-larm.com
16842 Millikan Avenue, Irvine, CA 92606
AccessControlPowerSupply.cdr
Features:
Field selectable for 12VDC or 24VDC output.
Operating voltage input 110~240 VAC.
Adjustable voltage range (11~15 VDC, 23~26 VDC) to
compensate for voltage drop.
Supply current: 5 Amps @ 12VDC, 4.5 Amps @ 24VDC.
AC input fuse rating 3.15 Amps (glass fuse).
DC output overload sensing with red LED indicator and
automatic shutdown during short circuit.
Power
Heavy-duty steel case to protect the power connections.
Removable steel cover for easy access.
Ventilation holes to prevent heat build-up.
Enclosure has enough room for two 7AH batteries.
6-foot power cord and battery leads included.
Dimensions: 12-3/16” x 12-7/16” x 3-9/16”.
Knock-out on the cover for optional cam lock.
Enclosure
Dimensions: 12-3/16" x 12-7/16" x 3-9/16"
®
EAP-5D1
1 Output, 5A@12VDC, 4.5A@24VDC
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Copyright 2007 SECO-LARM U.S.A., Inc. All rights reserved.
Connections:
DIP switch
for 12 or 24 VDC
output selection
VR1 rotary knob
for DC output
voltage range
adjustment
AC failure
delay timer
DIP switch
End-of Line
(EOL) 2.2K Ohm
resistor DIP switch
AC input fuse
AC input LED
status indicator
SL-126A
Power Supply
DC output LED
status indicator*
Back-up
battery terminal
AC failure Supervision
Relay Output to
Audio/Visual
warning device
Battery failure & low battery
Supervision Relay Output to
Audio/Visual warning device
DC output
terminal block
12 VDC Battery
(Optional)
+
-
Power Supply
Battery presence
and low battery
monitor DIP switch
110~240 VAC
INPUT
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
