Enforcer E-941SA-1K2PQ - Manual
Enforcer E-941SA-1K2PQ – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – ELECTROMAGNETIC LOCK
- Page 3 – See page 7 for a complete list of
- Page 5 – Hollow Metal Door; Use a thread-locking compound
- Page 6 – Also Available from; Voltage Selection Jumpers; NOTE
- Page 7 – Wire Length; 4VDC Minimum Wire Gauge:; Maximum Distance from Power Source to Electromagnetic Lock:; 2VDC Minimum Wire Gauge:; Control; Optional; : Connect switching devices like
- Page 8 – LIFETIME LIMITED WARRANTY; Remove the faceplate from the lock.
NOTE: Products with a model number that ends with “Q” or have a round green “Q” sticker represent RoHS compliant products.
Electromagnetic Lock
E-941SA-600
600-lb. (272kg)
E-941SA-1200
1200-lb. (545kg)
With LED, Bond Sensor
E-941SA-600PQ
600-lb. (272kg)
E-941SA-1K2PQ
1200-lb. (545kg)
Manual
Weatherproof
E-941SA-300
300-lb. (136kg)*
*E-941SA-300 is not UL listed.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SECO-LARM ELECTROMAGNETIC LOCK 2 SECO-LARM U.S.A., Inc. Table of Contents: Introduction: Features: The E-941SA series of electromagnetic locks is the ideal way to secure a door against unauthorized entry. When power is applied to the electromagnetic lock, it creates an extremely strong magnetic fiel...
SECO-LARM ELECTROMAGNETIC LOCK SECO-LARM U.S.A., Inc. 3 “L”-Bracket and “Z”-Bracket Short self- tapping screws Electromagnet Mounting plate Sexnut bolt Door spacer Armature screw Tamper caps Overview: Installation Applications: Long self-tapping screws Armature plate Guide pins Rubber washer Steel w...
SECO-LARM ELECTROMAGNETIC LOCK SECO-LARM U.S.A., Inc. 5 7. Put a rubber washer between the two metal washers, and place them over the armature screw between the armature plate and the door. This allows the plate to pivot around the screw to compensate for door misalignment. 9 . Screw the two short s...
