Emerson THROUGH 1200- User Manual
Emerson THROUGH 1200– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Rating Label; Do not exceed the values on the rating label.; Nameplate
- Page 5 – INSTALLATION; Engine Starting Contacts; Functional Test; – Manual Operation Test
- Page 6 – – Voltage Checks
- Page 7 – Refer to Section 3 of
- Page 8 – Automatic Closed Transition; See; Close the enclosure door first.; Transfer Test; Closed Transition Bypass; pushbutton while the
- Page 9 – SECTION 2 TESTING & SERVICE; TRANSFER TEST; Electrical Operation Transfer; PREVENTIVE MAINTENANCE
- Page 10 – MANUAL LOAD TRANSFER; Manual Operation
- Page 11 – INDEX; Controller User’s Guide
381333–203 C
50 Hanover Road, Florham Park, New Jersey 07932–1591 USA
For sales or service call 1 800 800–2726 (ASCO) www.ascopower.com
ASCO POWER TECHNOLOGIES CANADA PO Box 1238, 17 Airport Road, Brantford, Ontario, Canada N3T 5T3
telephone 519 758–8450, fax 519 758–0876, for service call 1 888 234–2726 (ASCO) www.asco.ca
Operator’s
Manual
7000 Series ACTS
Automatic Closed–Transition Transfer Switches
H–design 600 through 1200 amps
TABLE OF CONTENTS
section-page
INSTALLATION
1-1
. . . . . . . . . . . . . . . . . . . . . . . .
Mounting and Line Connections
1-1
. . . . . . . . .
Auxiliary Circuits and Harness
1-2
. . . . . . . . . . .
Engine Starting Contacts
1-2
. . . . . . . . . . . . . . .
Functional Test
1-2, 1-3, 1-4, 1-5
. . . . . . . . . . . . .
TESTING & SERVICE
2-1
. . . . . . . . . . . . . . . . . .
Transfer Test
2-1
. . . . . . . . . . . . . . . . . . . . . . . . . .
Preventive Maintenance
2-1
. . . . . . . . . . . . . . . .
Disconnecting the Controller
2-1
. . . . . . . . . . . .
Manual Load Transfer
2-2
. . . . . . . . . . . . . . . . . .
Trouble-Shooting
2-2
. . . . . . . . . . . . . . . . . . . . . .
INDEX
back cover
. . . . . . . . . . . . . . . . . . . . . . . . .
Note:
Refer to the outline and wiring drawings
provided with your 7000 Series ACTS for all
installation and connection details and accessories.
An ex perienced licensed electrician must install the ACTS.
600 ---1000 amp. size
DANGER is used in this manual to warn of high
voltages capable of causing shock, burns, or death.
WARNING is used in this manual to warn
of possible personal injury.
!
CAUTION is used in this manual to warn
of possible equipment damage.
!
Refer to
Group 5 Controller User’s Guide
381333–126
for ATS status display messages, time delays, pickup
& dropout settings, and adjustments.
1200 amp. size
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Emerson THROUGH 1200
Summary
Rating Label Each Automatic Closed–Transition Transfer Switch contains a rating label to define the loads and fault circuit withstand/ closing ratings. Refer to the label on the Transfer Switch for specific values. Do not exceed the values on the rating label. Exceeding the rating can cause personal...
INSTALLATION (continued) 1 --- 2 Engine Starting Contacts All customer connections, including the engine controlcontact connections, are located on terminal block TBwhich is mounted on the top right side of the enclosure.Refer to the wiring diagram provided with the automatictransfer switch and conn...
INSTALLATION (continued) 1 --- 3 1 – Manual Operation Test A detachable maintenance handle is provided on the frameof the Transfer Switch for maintenance purposes only.Manual operation of the transfer switch should bechecked before it is energized (operated electrically). Do not manually operate the...
