Emerson Solu Comp Xmt-P-FF/FI- User Manual
Emerson Solu Comp Xmt-P-FF/FI– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – OUNDATION
- Page 4 – GENERAL SPECIFICATIONS FOR Xmt-A; steam sterilizable sensors); Temperature accuracy using RTD:; HAZARDOUS LOCATION APPROVALS; EEx ia IIC T4; MODEL Xmt-A AMPEROMETRIC TRANSMITTER; FEATURES; ATEX
- Page 6 – Preamplifier Location:; DIGITAL COMMUNICATIONS:
- Page 7 – SENSOR COMPATIBILITY CHART; DIAGNOSTIC CAPABILITY
- Page 8 – RECOMMENDED SENSORS:; MODEL Xmt-C CONTACTING CONDUCTIVITY TRANSMITTER
- Page 9 – MODEL Xmt-T TOROIDAL CONDUCTIVITY TRANSMITTER; RECOMMENDED RANGES FOR TOROIDAL SENSORS
- Page 10 – TYPICAL MAIN SCREEN DISPLAYS:; pH
- Page 11 – FIGURE 2. AMS CONFIGURATION SCREEN USING HART; FIGURE 1. CONFIGURING MODEL Xmt-A TRANSMITTER WITH F; FIELDBUS
- Page 13 – FIGURE 5. PANEL MOUNTING
- Page 14 – FIGURE 6. SURFACE MOUNTING
- Page 15 – FIGURE 7. PIPE MOUNTING
- Page 16 – ORDERING INFORMATION; The Solu Comp Model Xmt Two-Wire Transmitter; is intended for the determination of pH/ORP, conductivity; ACCESSORIES; Specifications subject to change without notice.; MODEL
Product Data Sheet
71-XMT/rev.M
October 2010
Solu Comp
™
Model Xmt
™
TWO-WIRE TRANSMITTERS FOR pH, ORP,
CONDUCTIVITY, OXYGEN, OZONE, AND
CHLORINE
Model Xmt™
1
Family of Two-wire Transmitters
• CHOICE OF COMMUNICATION PROTOCOLS:
HART
®2
or F
OUNDATION
®3
Fieldbus
• CLEAR, EASY-TO-READ two-line display shows commissioning
menus and process measurement displays in English
• SIMPLE TO USE MENU STRUCTURE
• CHOICE OF PANEL OR PIPE/SURFACE MOUNTING
• NON-VOLATILE MEMORY retains program settings and calibration
data during power failures
• SIX LOCAL LANGUAGES — English, French, German, Italian, Spanish and Portuguese
FEATURES AND APPLICATIONS
The Solu Comp
™ 4
Model Xmt™ family of transmitters
can be used to measure pH, ORP, conductivity (using
either contacting or toroidal sensors), resistivity, oxygen
(ppm and ppb level), free chlorine, total chlorine, mono-
chloramine and ozone in a variety of process liquids.
The Xmt is compatible with most Rosemount Analytical
sensors. See the Specification sections for details.
The transmitter has a rugged, weatherproof, corrosion-
resistant enclosure (NEMA 4X and IP65). The panel
mount version fits standard ½ DIN panel cutouts, and
its shallow depth is ideally suited for easy mounting in
cabinet-type enclosures. A panel mount gasket is
included to maintain the weather rating of the panel.
Surface/pipe mount enclosure includes self-tapping
screws for surface mounting. A pipe mounting accesso-
ry kit is available for mounting to a 2-inch pipe.
The transmitter has a two-line 16-character display.
Menu screens for calibrating and registering choices
are simple and intuitive. Plain language prompts guide
the user through the procedures. There are no service
codes to enter before gaining access to menus.
Two digital communication protocols are available:
HART
®
(model option -HT) and F
OUNDATION®
fieldbus
(model option -FF or FI). Digital communications allow
access to AMS (Asset Management Solutions). Use
AMS to set up and configure the transmitter, read
process variables, and troubleshoot problems from a
personal computer or host anywhere in the plant.
The seven-button membrane-type keypad allows local
programming and calibrating of the transmitter. The
HART
®
and F
OUNDATION®
fieldbus Model 375 commu-
nicator can also be used for programming and calibrat-
ing transmitters.
1 Xmt is a trademark of Rosemount Analytical.
2 HART is a registered trademark of the HART Communication Foundation.
3 FOUNDATION is a registered trademark of Fieldbus Foundation.
4 Solu Comp is a trademark of Rosemount Analytical.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 3 SPECIFICATIONS - GENERAL Case: Polycarbonate (panel and surface/pipe mount). NEMA 4X/CSA 4 (IP65) Dimensions Panel (code -10): 6.10 x 6.10 x 3.72 in. (155 x 155 x 94.5 mm) Surface/Pipe (code -11): 6.23 x 6.23 x 3.23 in. (158 x 158 x 82 mm); see page 15 for dimen-sions of pipe mounting bracket...
Page 4 GENERAL SPECIFICATIONS FOR Xmt-A Input ranges: 0-330 nA, 0.3-4µA, 3.7-30 µA, 27-100 µA Repeatability (input): ±0.1% of range Linearity (input): ±0.3% of range Temperature range: -10 to 100°C (-10 to 150°C for steam sterilizable sensors) Temperature accuracy using RTD: ±0.5°C between 0 and 50°...
MODEL Xmt-P pH/ORP TRANSMITTER FEATURES The Model Xmt-P Transmitter with the appropriate sensor can be configured for either pH or ORP (oxidationreduction potential) measurement of aqueous solutions. Housed in a NEMA 4X case, the Model Xmt can be locat-ed close to the sensor even in the harshest env...
