Emerson Fisher 1061- Installation Manual
Emerson Fisher 1061– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Instruction Manual; Description
- Page 3 – Specifications; Emerson Process Management; Installation; WARNING
- Page 4 – Table 4. Approximate Actuator Weights; Actuator Mounting; numbers are shown in figure 6.; Note
- Page 5 – appropriate fasteners, such as mounting cap screws.; CAUTION; Table 5. Keyway Alignment Information
- Page 6 – Figure 2. Fisher 1061 Mounting Dimensions
- Page 9 – Figure 3. Center of Gravity Dimensions
- Page 10 – Figure 5. Valve Shaft Coupling
- Page 11 – Pressure Connections; Table 6. Wrench Sizes Required for Actuator Adjustment, Inches; Adjustment; equipment must be removed from the pipeline.
- Page 12 – each hex nut to the torque value listed in table 7.; Principle of Operation; provided. Such a device is not furnished as part of the actuator.; Maintenance; disassembly and replacement of parts.
- Page 13 – Before performing any maintenance operations:; loosening the packing box pipe plug.; Disassembly; from the top of the actuator.
- Page 14 – output shafts, refer to step 7 for this procedure.; Assembly; a travel stop (key 15) will be threaded into the cylinder flange.
- Page 15 – Table 7. Bolting Torques
- Page 16 – Changing Actuator Mounting; Changing Styles
- Page 17 – Changing Positions
- Page 19 – Parts Ordering; from the following parts list when ordering replacement parts.; Repair Kits
- Page 23 – Figure 8. Partial View of Actuator with Bypass Valve
www.Fisher.com
Fisher
r
1061 Pneumatic Piston Rotary Actuator
with Style H & J Mounting Adaptations
Contents
Introduction
1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Scope of Manual
1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Description
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications
3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Educational Services
3
. . . . . . . . . . . . . . . . . . . . . . . . .
Installation
3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Actuator Mounting
4
. . . . . . . . . . . . . . . . . . . . . . . . . .
Pressure Connections
11
. . . . . . . . . . . . . . . . . . . . . . .
Adjustment
11
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Principle of Operation
12
. . . . . . . . . . . . . . . . . . . . . . . .
Maintenance
12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disassembly
13
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Assembly
14
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing Actuator Mounting
16
. . . . . . . . . . . . . . . . . .
Changing Styles
16
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing Positions
17
. . . . . . . . . . . . . . . . . . . . . . . . .
Parts Ordering
19
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Repair Kits
19
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts List
19
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 1. Fisher 1061 Actuator
W4142
W4257-1
H Mounting Adaptation
J Mounting Adaptation
and Fisher 3610JP Positioner
Introduction
Scope of Manual
This instruction manual includes installation, adjustment, maintenance, and parts ordering information for the Fisher
1061 pneumatic piston rotary actuator (sizes 30, 40, 60, and 68) with H and J mounting adaptations (see figure 1).
Instructions for the positioner, accessories, and, if used, the auxiliary handwheel actuator are covered in separate
instruction manuals.
Do not install, operate, or maintain a 1061 actuator without being fully trained and qualified in valve, actuator, and
accessory installation, operation, and maintenance. To avoid personal injury or property damage, it is important to
carefully read, understand, and follow all the contents of this manual, including all safety cautions and warnings. If you
have any questions about these instructions, contact your Emerson Process Management sales office before
proceeding.
Instruction Manual
D100325X012
1061 H & J Actuator
October 2012
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Instruction Manual D100325X012 1061 H & J Actuator October 2012 2 Table 1. Specifications Available Configuration Double-acting pneumatic piston rotary actuator for J throttling service when used with positioner or J on-off service when used with switching devices. Mounting adaptations include J...
Instruction Manual D100325X012 1061 H & J Actuator October 2012 3 Specifications Specifications are shown in table 1 for 1061 actuators. Specifications for a given 1061 actuator as it originally comes from the factory are stamped on a nameplate (key 42, figure 6) attached to the actuator. Educat...
Instruction Manual D100325X012 1061 H & J Actuator October 2012 4 Table 3. Acceptable Shaft Diameters and Torque Limits for Actuators with J Mounting ACTUATOR SIZE COUPLING AVAILABILITY BY KEYED SHAFT DIAMETER TORQUE LIMIT FOR J MOUNTING mm Inches N S m Lbf S in 30 9.5 12.715.919.125.4 3/81/25/8...
