Emerson CP200- User Manual
Emerson CP200– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Inlet Pressure Ratings and Flow and Sizing Coefficients; Product Description; The CP200 Series pressure loaded regulators are intended; Available Configurations; WArNiNG; could result in an explosion and/or fire causing
- Page 3 – Specifications; Orifice Sizes and Flow and IEC Sizing Coefficients; Outlet Pressure Ranges
- Page 4 – Principle of Operation; Type CP200 Base regulator; Increasing Downstream Demand; Type CP205 with secondary seatTM Protection
- Page 5 – lockup. In the event that the primary orifice and disk cannot; Protection Limitations; CAUTiON; CP200 Series with Secondary Seat; Protection; CONTROL SPRING
- Page 6 – indicates that the primary orifice/seat or the disc are no; installation and Overpressure; to permit free flow of gas to the atmosphere.; Specifications section may cause leakage,; General installation instructions; • Ensure gas flow through the regulator is in the same; installation Location; vehicular traffic and damage from other external sources.; CP200 Series Regulator Installed with a Type 289H
- Page 7 – startup; Adjustment; shutdown
- Page 8 – Maintenance; disassembly without first isolating the; regulator reassembly; the orifice from; Trim Maintenance
- Page 9 – Parts Ordering; The type number, orifice size, and date of manufacture are; Parts List; CP200 series Main valve and Actuator; Type 67CP Pressure Loading
- Page 10 – CP200 Series Regulator Assembly
- Page 12 – 7CP Series Pressure Loading Regulator Assembly
CP200 Series
D103121X012
Instruction Manual
Form 5834
December 2013
www.fisherregulators.com
CP200 series Commercial / industrial Pressure-
Loaded Pressure reducing regulator
introduction
scope of the Manual
This manual provides instructions for the installation,
maintenance, and parts ordering information for CP200 Series
pressure loaded pressure reducing regulators.
Figure 1.
Typical CP200 Pressure Loaded Pressure Reducing Regulator
P1180
Table of Contents
Introduction ............................................................................1
Specifications ........................................................................3
Principle of Operation ............................................................4
Installation and Overpressure Protection ..............................6
Startup ...................................................................................7
Adjustment.............................................................................7
Shutdown...............................................................................7
Maintenance ..........................................................................8
Parts Ordering .......................................................................9
Parts List................................................................................9
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
CP200 Series 2 Table 2. Inlet Pressure Ratings and Flow and Sizing Coefficients series OriFiCe siZe MAXiMUM OPerATiNG iNLeT PressUre (1)(2) FLOW COeFFiCieNTs (WiDe-OPeN) C 1 ieC siZiNG COeFFiCieNTs inch mm psig bar C g C v X T F D F L CP200 1/8 3/16 1/4 3/8 1/2 3.2 4.8 6.4 9.5 13 125 125 125 60 40 8...
CP200 Series 3 Available Configurations Type CP200iN - Regulator with internal registration Type CP200iT - Regulator with internal registration and token relief Type CP205iN - Type CP200IN with Secondary Seat™ Protection Type CP205iT - Type CP200IT with Secondary Seat Protection Type CP206iT - Type ...
CP200 Series 4 Principle of Operation Refer to Figure 2. The CP200 Series has spring-to-close construction and uses 67CP Series pressure loading regulator to supply loading pressure to the top of the main diaphragm. Since the loading pressure regulator controls the main regulator, adjustment to the ...
