Emerson 16C26S-010- User Manual
Emerson 16C26S-010– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – ELECTROCUTION HAZARD; WARNING; TABLE OF CONTENTS
- Page 4 – PREINSTALLATION; LOCATING THE AIR FILTER; DIRECTION OF AIR FLOW THROUGH THE
- Page 5 – TYPICAL MOUNTING POSITIONS
- Page 6 – INSTALLATION; REMOVE OLD FILTER AND DISCARD; Transition Fittings
- Page 7 – WIRING INSTRUCTIONS
- Page 8 – OPERATION; CLEANING THE CELLS; CAUTION
- Page 9 – REPLACING AN IONIZING WIRE; SPECIFICATIONS
- Page 10 – Unit functioning Normally; BASIC UST SERVICE GUIDE
- Page 11 – TECHNICAL REPAIR GUIDE; Collecting Cell
- Page 12 – Ozone Reduction Jumper; OZONE REDUCTION
- Page 13 – NOTES
- Page 14 – REPAIR PARTS
- Page 15 – PARTS LIST FOR ELECTRONIC AIR CLEANERS
- Page 16 – NOTICE TO CONSUMERS; Electronic Air Cleaner
U S T
Universal Slim Twin
Model Number
16C26S-010
OWNERS MANUAL
•
Installation
•
Operation
•
Basic UST Service Guide
•
Technical Repair Guide
•
Repair Parts
Part No. 37-6070A
Replaces 846-2027 Rev B
0015
Electronic Air Cleaner
Printed In U.S.A.
UL Listed
CSA Certified
by White-Rodgers
Please read and familiarize yourself with the contents of this manual
before installing, operating or performing maintenance on the unit.
WHITE-RODGERS
UNIVERSAL SLIM TWIN
ELECTRONIC AIR CLEANER
OPERATING
LIGHT
OFF
ON
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Emerson 16C26S-010
Summary
2 RULES FOR SAFEINSTALLATIONAND OPERATION Please read instructions before installing and using theElectronic Air Cleaner. This will help you obtain the fullbenefit from the Electronic Air Cleaner you have selected. WARNING ! ELECTROCUTION HAZARD Shut off power at fuse panel beforeservicing. Failure ...
4 PREINSTALLATION facing the power door. Air flow direction must agree witharrow embossed on end of collecting cells. After installing the cell sections, install pre-filters in cabi-net tracks on the right. This will again place the pre-filterson the air entering side (on the same side as ionizingwi...
5 TYPICAL MOUNTING POSITIONS BASEMENT FURNACE(LOWBOY) (Figure 6) Cleaner is mounted hori-zontally in return plenum,just above furnace. COUNTERFLOWFURNACE (Figure 7) Cleaner is mounted horizon-tally in return duct or plenum,just above furnace. HIGHBOY FURNACE(Figure 8) Side installation. Cleaneri s m...
