Emerson 00825-0100-4593 - Manual

Emerson 00825-0100-4593

Emerson 00825-0100-4593 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
Page: / 22

Table of Contents:

  • Page 2 – Quick Installation Guide; WARNING; Explosions could result in death or serious injury:; is applied to the unit.; Process leaks may cause harm or result in death.; cause electrical shock.; IMPORTANT NOTICE
  • Page 3 – TEP; Liquid Flow Applications; Flow
  • Page 4 – B. Optional Mounting Brackets; Pipe Mount; Flat Mount
  • Page 5 – that is designed for its specific flange adapter, as shown below.
  • Page 6 – To improve field access or to better view the optional LCD display:; NOTE; Housing Lock Nut
  • Page 7 – Use the following steps to wire the transmitter:; Figure 1. Field Wiring Diagram; than the conduit connections and the transmitter housing.; Power
  • Page 8 – Power Supply; Figure 2. Load Limitation; Code; at Supply Voltage (V
  • Page 9 – Failure Mode Alarm Switch; Figure 3. Switch Locations
  • Page 10 – Function
  • Page 11 – Configure LCD Display; Note that the decimal point wraps around.; Options; Retaining Ring
  • Page 12 – seconds. The LCD display is now configured.
  • Page 13 – Full Trim; Zero Trim; Using the HART Communicator; HART Fast Keys; HART Fast Keys
  • Page 15 – RODUCT; Approved Manufacturing Locations
  • Page 16 – Canadian Certifications; Canadian Standards Association (CSA) Approvals; European Certifications; EEx d IIC T6 (–40 °C; EEx d IIC T4 (–40 °C; II 1 GD; Ex ia IIC T4 (–60 °C; Entity Parameters
  • Page 17 – II 3 GD; current limiting barrier.; Table 3. Entity Parameters
  • Page 18 – metallic housing shall be bonded to the system earth.; Combination Certifications
Loading the manual

www.rosemount.com

¢00825-0100-4360N¤

Quick Installation Guide

00825-0100-4593, Rev BA
July 2009

Rosemount 1151

Step 1: Mount the Transmitter

Step 2: Consider Housing Rotation

Step 3: Connect the Wiring and Power Up

Step 4: Set Switches

Step 5: Configuration

Step 6: Trim the Transmitter

Product Certifications

Start

End

Rosemount 1151 Pressure Transmitter

with 4-20 mA HART Protocol

4593_Rev_BA.fm Page 1 Friday, August 7, 2009 3:38 PM

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Quick Installation Guide; WARNING; Explosions could result in death or serious injury:; is applied to the unit.; Process leaks may cause harm or result in death.; cause electrical shock.; IMPORTANT NOTICE

Quick Installation Guide 00825-0100-4593, Rev BA July 2009 Rosemount 1151 2 WARNING Explosions could result in death or serious injury: Installation of this transmitter in an explosive environment must be in accordance with the appropriate local, national, and international standards, codes, and pra...

Page 3 - TEP; Liquid Flow Applications; Flow

Quick Installation Guide 00825-0100-4593, Rev BAJuly 2009 Rosemount 1151 3 S TEP 1: M OUNT THE T RANSMITTER A. Applications Liquid Flow Applications 1. Place taps to the side of the line.2. Mount beside or below the taps. Gas Flow Applications 1. Place taps in the top or side of the line.2. Mount be...

Page 4 - B. Optional Mounting Brackets; Pipe Mount; Flat Mount

Quick Installation Guide 00825-0100-4593, Rev BA July 2009 Rosemount 1151 4 S TEP 1 CONTINUED ... B. Optional Mounting Brackets When installing the transmitter to one of the optional mounting brackets, torque the bracket bolts to 125 in.-lbs. (0,9 N-m). Pipe Mount Panel Mount (1) (1) Panel bolts are...

Other Emerson Models