Emerson 00825-0100-4530 Rev EC - Manual

Emerson 00825-0100-4530 Rev EC

Emerson 00825-0100-4530 Rev EC – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
Page: / 36

Table of Contents:

  • Page 2 – Quick Installation Guide; About this guide; Explosions could result in death or serious injury; Electrical shock can result in death or serious injury
  • Page 3 – Contents
  • Page 4 – Step 1: Confirm system readiness; Confirm HART revision capability; Confirm correct Device Driver; ensure proper communication.; Rosemount 5300 device revisions and drivers; Device Driver and documentation for your device.; Table 1. Rosemount 5300 device revisions and files; Switch HART revision mode; To change to HART Revision 5, Enter: “HART5” in the Message field
  • Page 5 – Tank connection with flange
  • Page 6 – Bracket mounting, on wall
  • Page 7 – Remote housing
  • Page 8 – Step 3: Connect the wiring; Grounding
  • Page 9 – To connect the transmitter; Verify that the power supply is disconnected.; Terminal block
  • Page 10 – HART communication; within the loop in order to function properly, see diagrams below.; Non-intrinsically safe power supply
  • Page 11 – Type n approvals : non-sparking / energy limited power supply
  • Page 12 – Load limitations; The Field Communicator requires a minimum load resistance of 250
  • Page 13 – fieldbus; The Rosemount 5300 Series transmitter, F; fieldbus version, operates
  • Page 14 – RS-485 with Modbus communication
  • Page 15 – Field Communicator, the AMSTM Suite, DeltaV; fieldbus parameters are given.; Installing the Rosemount Radar Master software
  • Page 16 – Master
  • Page 17 – Tank Height; , the distance from the Upper Reference Point to the Lower; Mounting Type; if Mounting Type is Nozzle or; Nozzle Height; if Mounting Type is Nozzle.; fieldbus parameters:
  • Page 19 – Guided Setup
  • Page 20 – You may be required to calibrate Vapor Compensation, to set up; Setup - Modbus communication parameters; communication parameters:; Setup; menu select; General; Enter the desired Modbus communication settings.
  • Page 21 – Installation; ) at different currents; Configuration
  • Page 22 – Damping; damping values + response time; Alarm and saturation levels; Write protection; Table 3. Alarm levels and operation values; Rosemount Alarm Level; Namur Alarm Level
  • Page 23 – Site acceptance; Operation and maintenance; Proof test; Disable write protection if the function is enabled.; This step tests for possible quiescent current related failures.
  • Page 24 – Document the test result for future reference.; Inspection; reported. Feedback can be submitted electronically at; Contact Us; References; estimates. The full report is accessible at
  • Page 25 – EU conformity; The EC declaration of conformity can be found on; Hazardous Locations certifications; North-American certifications; Specific conditions of use:
  • Page 26 – Canadian Standards Association (CSA) approvals; Dual seal annunciation; Intrinsically Safe Exia:
  • Page 27 – European certifications; ATEX approvals; Intrinsically safe and FISCO model:
  • Page 28 – Brazilian certifications; INMETRO approvals
  • Page 29 – IB; Chinese certifications; National Supervision and Inspection Center for Explosion
  • Page 30 – fieldbus FISCO model:; Japanese certifications; Technology Institution of Industrial Safety (TIIS) approval
  • Page 31 – IECEx certifications; IECEx approvals
  • Page 32 – Other certifications; Overfill protection; Suitability for intended use
  • Page 33 – EC Declaration of Conformity; Figure 1. EC Declaration of Conformity - page 1
  • Page 34 – Figure 2. EC Declaration of Conformity - page 2
  • Page 35 – Figure 3. EC Declaration of Conformity - page 3
Loading the manual

Quick Installation Guide

00825-0100-4530, Rev EC

March 2013

Superior Performance
Guided Wave Radar
Level and Interface Transmitter

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Quick Installation Guide; About this guide; Explosions could result in death or serious injury; Electrical shock can result in death or serious injury

March 2013 2 Quick Installation Guide About this guide This installation guide provides basic guidelines for Rosemount 5300 Series transmitters. It does not provide instructions for configuration, diagnostics, maintenance, service, troubleshooting, Explosion-proof, Flameproof, or intrinsically safe ...

Page 3 - Contents

Quick Installation Guide 3 March 2013 Any substitution of non-authorized parts or repair, other than exchanging the complete transmitter head or probe assembly, may jeopardize safety and is prohibited. Unauthorized changes to the product are strictly prohibited as they may unintentionally and unpred...

Page 4 - Step 1: Confirm system readiness; Confirm HART revision capability; Confirm correct Device Driver; ensure proper communication.; Rosemount 5300 device revisions and drivers; Device Driver and documentation for your device.; Table 1. Rosemount 5300 device revisions and files; Switch HART revision mode; To change to HART Revision 5, Enter: “HART5” in the Message field

March 2013 4 Quick Installation Guide Step 1: Confirm system readiness Confirm HART revision capability  If using HART-based control or asset management systems, confirm the HART capability of those systems prior to transmitter installation. Not all systems are capable of communicating with the HAR...

Other Emerson Models