Page 2 - CONTENTS
1 CONTENTS PREFACE .................................................................................................................... 2 FEATURES.................................................................................................................. 3 PRECAUTIONS.............................
Page 3 - PREFACE
2 PREFACE The speed dome is a new subcompact dome camera system designed to deliver superb performance and durability with a pristine housing that looks good in any security and surveillance installation. This speed dome contains new generation advanced DSP color camera, with 22X optical zoom multip...
Page 4 - FEATURES; CAMERA FEATURES; Slow Shutter
3 FEATURES CAMERA FEATURES 1. Optical performance: (1). DR model: 23X optical zoom with 12X digital magnifier. (2). S model: 22X optical zoom with 12X digital magnifier. 2. Continuous Auto-focus or manual focus 3. Minimum illumination: (1). DR model: 23X lens: 0.01 lux (0 lux: IR illuminator ON) (2)...
Page 6 - PRECAUTIONS
5 PRECAUTIONS 1. Handle the camera carefully Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handing or storage. 2. DO NOT disassemble the camera To prevent electric shock, do not remove screws or covers. There are no user serviceable parts inside. Ask ...
Page 7 - QUICK STARTING; FUNCTION DEFINITION; Preset Function Definition; Auto-Pan Function Definition; Sequence Function Definition
6 QUICK STARTING The section is a quick reference for users to manipulate a dome camera in a short time. We explain the operational method through different keyboards. FUNCTION DEFINITION ■ Preset Function Definition Preset point means that dome camera will save pan/tilt/zoom positions to its memory...
Page 8 - QUICK START FROM ESD-CC1 KEYBOARD; Preset Function Operation
7 QUICK START FROM ESD-CC1 KEYBOARD Please press <DOME> button and enter the ID of dome to start to control the selected dome camera. ■ Preset Function Operation ■ Setting Press a number key for preset point such as <2>. Press <SET PRESET> to record this position as preset point 2....
Page 9 - Cruise Function Operation
8 1. Press a number key to set a sequence line such as <1>. Press <SET SEQ.> to start modifying parameters of sequence 1. 2. LCD is displaying “001. PST SPD DWELL” now. You can edit the parameters such as <4> <ENTER> for PST, <1> <5> <ENTER> for SPD and <...
Page 10 - SWITCH SETTING; SWITCH DEFINITION; B C; ID Setting
9 SWITCH SETTING SWITCH DEFINITION A B C A. ID Setting (SW1~SW3) B. Dome Control Protocol C. RS-485 Setting ID Setting Use SW1 ~ SW3 to change your speed dome ID by turning the arrow to the desired number respectively.
Page 11 - Dome Control Protocol; RS-485 Communication
Dome Control Protocol Refer to below table and turn the arrow to choose a protocol for your speed dome. RS-485 Setting Refer to below table for desired RS-485 settings of your dome camera. SW No. Protocol SW No. Protocol SW No. Protocol 00 VCL 06 None 12 None 01 Pelco D 07 ELMO 13 None 02 Pelco P 08...
Page 12 - Alarm Pin Definition
Page 13 - INSTALLATION
INSTALLATION STEP 1: Unpack the dome package and take out the dome bodies. STEP 2: Rotate the top holder and take it off from the upper dome body. 12 STEP 3: Rotate the smoke bubble and remove it.
Page 18 - CONNECTION; CABLE CONNECTION; Pin
17 CONNECTION CABLE CONNECTION 22-PIN CONNECTOR DEFINITION The definitions of the pins on the 22-pin connector are listed as below table. No. Pin Color Cable 1 AC24-1 White 2 Empty 3 AC24-2 Black 4 Empty 5 FG Green 6 Empty 1007 20AWG 7 T+ Yellow 8 R- Orange 9 T- Green 10 R+ Brown 1007 24AWG 11-20 Em...
Page 19 - Definition
18 RS-485 Connector Please connect keyboard to Speed Dome through the terminal block. The communication interface between Speed Dome and Keyboard is RS-485. Maximum cable length for RS-485 communication over 24-gauge wire is 4000 feet (1219 meters). The recommended cable for RS-485 communication is ...
Page 20 - OSD DISPLAY FORMAT; POSITION
19 OSD DISPLAY FORMAT OSD DISPLAY FORMAT 1 2 3 4 5 6 < Fig1. OSD DISPLAY POSITION> POSITION FUNCTION OSD DISPLAY DESCRIPTION A Auto Focus Mode 1 FOCUS MODES M Manual Focus Mode X Back Light Compensation OFF 2 BACKLIGHT B Back Light Compensation ON 3 ALARM ALARM Alarm Message 4 ZOOM RATIO X1 Pr...
Page 21 - SPECIFICATIONS
20 SPECIFICATIONS GENERAL FEATURES Environment Indoor / Outdoor Controller I/F RS-485 Operating Temperature -30° – 45 °C Power Source 24 VAC Max Power Consumption 52W Dimensions w/o Sunshield: 234 x 305mm w/ Sunshield: 263 x 305mm Weight 5.8kg ROTARY BODY FEATURES Environment ESD-380 Pan Travel 360 ...
Page 22 - SYSTEM ARCHITECTURE
Page 23 - APPENDIX - OSD MENU; OSD TREE STRUCTURE
22 APPENDIX - OSD MENU This camera utilizes a user setup menu that is displayed on-screen. This setup menu contains various sub menus that from a tree-type structure as shown below. This menu is described in the “SETUP MENU DESCRIPTION” OSD TREE STRUCTURE ON DEFAULT OFF ON BLC LEVEL 000 ~ 100 BACKLI...
Page 26 - OSD MENU
25 OSD MENU There are two pages of OSD setup menu allow users to control the camera parameters, these functions are described in the following sections in detail. Please use LEFT/ RIGHT/ UP/ DOWN of direction keys to select your parameters. MENU ITEM 1. DEFAULT If you select ON for this item, all th...
Page 28 - EXIT; ON
SLOW SHUTTER You can set the slowest shutter speed. With the slowest shutter speed, you can see objects in a dark environment under 0.2 lux. With a higher shutter speed, you can see a smooth video image from camera ANGLE ADJUSTER (MIN/ MAX) User can see more area higher if they adjust the MAX angle ...
Page 33 - SYMBOL DEFINITION
32 APPENDIX - PELCO The Speeddome can be controlled through a keyboard which built in D protocol and P protocol . Please follow the instruction to manipulate our Speeddome with a keyboard which built in D protocol and P protocol. SYMBOL DEFINITION <Preset Go> A single button which can command ...
Page 34 - CABLE DEFINITION (D Protocol Keyboard to Speed Dome)
CABLE LENGTH The communication interface between Speed Dome and Keyboard is RS-485. Maximum cable length for RS-485 communication over 24-gauge wire is 4000 feet (1219 meters). CAT 5 cable is recommended. CABLE DEFINITION (P Protocol Keyboard to Speed Dome) Fo r P Pro t o c o l Ke yb o a rd Fo r Sp ...
Page 35 - APPENDIX - PHILIPS ALLEGIANT
34 APPENDIX - PHILIPS ALLEGIANT The dome cameras can be integrated into Philips Allegiant systems through A repeater. Please follow the instructions to control dome cameras through Philips Allegiant systems. SYMBOL DEFINITION <shot> A physical single button : Command dome cameras to go to spec...
