Page 2 - without prior written permission of the company.; Important Information
User’s Manual Notice The information given in this manual was current when published. The company reserves the right to revise and improve its products. All specifications are subject to change without notice. Copyright Under copyright laws, the contents of this user manual may not be copied, photoc...
Page 3 - User’s Manual; Cautions; Handle the camera carefully; damaged by improper handing or storage.; Do not disassemble the camera; heat the camera and may cause malfunction.; power source ratings; danger of electric shock.; Never face the camera towards the sun
User’s Manual Cautions • Handle the camera carefully Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handing or storage. • Do not disassemble the camera To prevent electric shock, do not remove screws or covers. There are no user serviceable parts insid...
Page 4 - Content
User’s Manual Content 1. Overview .................................................................................................................................... 5 1.1 Product Features ............................................................................................................. ...
Page 6 - Overview; advanced DSP color camera:
User’s Manual 1. Overview ESD-370 is a new subcompact integrated high speed dome camera designed to deliver superb performance and durability with an intelligent and stylish housing that is suitable in any security and surveillance installation. ESD-370 series dome cameras support one cabling for ea...
Page 7 - Features; Precise and Accurate Tracking
User’s Manual alarm is triggered. Large set of built-in protocols provide connectivity to other surveillance systems. The built-in protocols include ELMO, Pelco, VCL, Philips, AD-422 (Manchester), etc, which allow the Integrated High Speed Dome Camera series to be integrated with other suppliers' su...
Page 8 - Application
User’s Manual • AD/AD-422 • Chiper Privacy Mask for Privacy Protection • Up to 24 privacy zones of camera view programmable Dynamic Dome Configuration • Flexible In/Outdoor mountings • Compact lightweight design for easy installation • Weather resistant housing for temperature, sun ray, and rain Int...
Page 9 - Connecting the High Speed Dome
User’s Manual 2. Connecting the High Speed Dome Please refer to the following sections to connect, set and operate the dome camera. In order to control the integrated high speed dome, basically a control keyboard or other control device is required. 2.1 Package Content Before proceeding, please chec...
Page 10 - Definition; settings are located on the bottom of the dome camera.; Setting; RS-485 Communication
User’s Manual 2.2 Switch Definition First of all, configuring the dome ID and communication protocol is required before connecting the dome camera to other devices. The switches used for configuring these settings are located on the bottom of the dome camera. Indoor Dome A Reserved B RS-485 Setting ...
Page 11 - ID; Control; Protocol
User’s Manual Half-duplex Full-duplex 2.4 Dome ID Setting Use the switch to change your speed dome ID by turning the arrow to the desired number respectively. For instance, if the dome ID is 123, the ID switch should be set as below. NOTE: No two domes should be given the same ID, or communication c...
Page 12 - 2-Pin Connector Definition; Pin
User’s Manual 07 ELMO 9600 08 AD422 4800 09 DM P 9600 11 Pelco D 4800 12 Pelco D 9600 13 Pelco P 2400 14 Pelco P 9600 15 JVC 9600 16 GANZ 9600 Select protocol: Pelco D, for instance, the ID switch should be set as below. Decimal single digit 2.6 22-Pin Connector Definition A 50-cm data cable (as bel...
Page 13 - VGND
User’s Manual 7 T+ Yellow 8 R- Orange 9 T- Green 10 R+ Brown 1007 24AWG 11~20 Alarm Pin (Not wired) 21 VGND 22 Video 12
Page 14 - Alarm Pin Definition; Connector
User’s Manual 2.7 Alarm Pin Definition The alarm pins are serviceable for connecting alarm in- and output devices. Following lists the definition of alarm pin on the 22-pin connector located on the bottom of the dome camera. Pin Cable Color Definition 2 White ALM NO 4 Black ALM NC 6 Green ALM COM 11...
Page 15 - and; OSD Display Format; Position
User’s Manual 3. Operation and Configuration 3.1 OSD Display Format The information shown on the screen are described in terms of OSD display, position and function description in the table below. 1 2 3 4 5 6 Position Function OSD Display Description A Auto Focus Mode 1 Focus Modes M Manual Focus Mo...
Page 16 - indicates the factory default.; Item
User’s Manual 3.2 OSD Menu Tree The OSD setup menu structure of S and DR models are listed below. The star symbol indicates the factory default. For detailed function description, please see section 3.3 Configuration Menu. Item Layer 1 Layer 2 Layer 3 Default DEFAULT CAMERA <ON>, <OFF> O...
Page 18 - TIME
User’s Manual Item Layer 1 Layer 2 Layer 3 Default MASK CLEAR+RESET <01> ~< 08> 01 MASK DSIPLAY <FIRST>, <LAST> First EXIT YES TIME DISPLAY <ON>, <OFF> OFF SET YEAR SET MONTH SET DAY SET HOUR SET MINUTE TIME EXIT+SAVE SCHEDULE SWITCH <ON>, <OFF> OFF SC...
Page 19 - Menu; Model; CAMERA
User’s Manual 3.3 Configuration Menu The detailed functions and parameter settings of your high speed dome can be set by the OSD (On Screen Display) menu with a control device, such as ELMO control keyboard. The functions in OSD menu are described in the following sections. E/F/U Model R/K Model MAI...
Page 20 - AUTO; Near/Far button on the control keyboard.
User’s Manual camera parameters. 3.3.2 BACKLIGHT The Backlight compensation function prevents the center object from being too dark in surroundings where excessive light is behind the center object. The Backlight Compensation Level ranges from 000 to 100. BLC LEVEL LEVEL 20 EXIT YES NOTE: If this fu...
Page 21 - achieve a better image.; MANUAL; enhances the incident ray of camera.; MODE; output level. IRIS OFF SET is used to set the level of IRIS variation.; SHUTTER
User’s Manual function, users can adjust the enhancement of the edges of objects in the picture. When shooting text, this function may help by making them sharper and achieve a better image. There are 32 levels of adjustment; the options are <00> ~ <31>, <00> represents “no enhance...
Page 22 - AGC; Light Sources; DISPLAY
User’s Manual depends on the AGC circuit. • AGC With this option, the AGC priority is higher than SHUTTER and IRIS; SHUTTER and IRIS circuit will function automatically in cooperating with AGC to get consistent exposure. If AGC is adjusted manually, the exposure compensation depends on the changing ...
Page 23 - ON; Hide the ID address of the selected dome.; MENU; the model of dome cameras, the SETUP MENUs are different.; IMAGE
User’s Manual • ON Display the ID address of the selected dome on the right bottom of the monitor screen. • OFF Hide the ID address of the selected dome. 3.3.8 SETUP MENU Users can adjust camera lens model parameters under SETUP MENUs. Depending on the model of dome cameras, the SETUP MENUs are diff...
Page 25 - SLOW SHUTTER; RESET
User’s Manual resolution of the zoomed image quality. On the other hand, Digital zoom takes a portion of image and expands that image to the full size of the image; however the image quality will be reduced. Digital zoom ratio is adjustable from <1> to <12>. • SLOW SHUTTER The shutter sp...
Page 26 - even titles are set in advance.; SETTING; mask ID numbers for future recognition.
User’s Manual 3.3.10 TITLE DISPLAY Users are allowed to name a certain view area and display its title for easy recognition. At this item, users can choose to display or not to display the titles set in advance. • ON A title set for certain view will be displayed when the dome back to the view area....
Page 27 - ALARM PIN
User’s Manual <DELETE> and press <ENTER> to delete the selected character. STEP7: When the setting is completed, move the cursor to <SAVE> and press <ENTER> to save. 3.3.12 ALARM SETTING The integrated high speed dome provides eight alarm inputs and two alarm outputs (N.O. an...
Page 30 - PAN
User’s Manual manually by selecting this item. • EXIT Exit the HOME SETTING menu. 3.3.14 SEQUENCE The function executes pre-positioning of the pan, tilt, zoom and focus features in a certain sequence for a camera. Before set up this function, users must setup at least two preset points. • SEQUENCE L...
Page 31 - sequence point until users manually move the dome.
User’s Manual Speed 4 45 30 Speed 5 55 40 Speed 6 65 50 Speed 7 75 58 Speed 8 185 185 Speed 9 205 210 Speed 10 225 240 Speed 11 250 275 Speed 12 280 305 Speed 13 320 335 Speed 14 365 365 Speed 15 400 400 • DWELL TIME The DWELL TIME is the duration time that the dome will stay at the sequence point, ...
Page 34 - according to the image brightness level.; THRESHOLD; higher sensitivity and can improve the reliability of lens.; IR COLOR; Select the item to remove the IR cut filter.
User’s Manual 3.3.17 IR FUNCTION (Removable IR Cut) With the IR cut filter, the dome can still catch clear image at night time or very dark light condition. During day time, the IR cut filter will be on to block the infrared light for clear image; during night time, the IR cut filter will be removed...
Page 35 - WDR SWITCH
User’s Manual function is enabled, because the WDR function has better effect than the Backlight compensation. WDR SETTING WDR SWITCH OFF WDR FUNCTION AUTO EXIT YES • WDR SWITCH Enable or disable the WDR function with the item. • WDR FUNCTION This item is used to define the WDR function mode. AUTO I...
Page 36 - PRIVACY SWITCH; configuring mask zone.; SHADE; set too close with each other.
User’s Manual PRIVACY PRIVACY SWITCH ON SHADE GRAY SET MASK 01 MASK CLEAR+RESET 01 MASK DISPLAY FIRST EXIT YES • PRIVACY SWITCH The item is used to enable or disable masking function. Set this item to <ON> before configuring mask zone. • SHADE The color of privacy mask can be selected through ...
Page 37 - MASK DISPLAY; This item is used to set the occasion to display privacy mask.; FIRST; within tilt angle 45; EXIT; FUNCTION; TIME DISPLAY; The items are for setting up the system date.
User’s Manual • MASK CLEAR+RESET The item is used to clear the mask settings of the selected privacy mask. Use LEFT/RIGHT direction keys to select a mask and press <ENTER> to erase its configuration. • MASK DISPLAY This item is used to set the occasion to display privacy mask. FIRST If select ...
Page 38 - The items are for setting up the system time.; Users are allowed to set up 32 schedule points.
User’s Manual • HOUR / MINUTE The items are for setting up the system time. • EXIT+SAVE Exit this page. 3.3.22 SCHEDULE FUNCTION The unique Scheduling function enables users to program a preset point or function (Sequence/Auto-pan/Cruise) automatically actions in certain period of time. SCHEDULE SCH...
Page 39 - Enable the Cruise function for the selected schedule.; IR FUNCTION; OSD; on control keyboard quickly.
User’s Manual Enable the Cruise function for the selected schedule. IR FUNCTION Select <AUTO> or <ON> to enable the function for the schedule. 3.3.23 EXIT OSD To exit the OSD setup menu, users can either select this item, or press the ESC button on control keyboard quickly. 38
Page 40 - Appendix A: Technical Specification; All specifications are subject to change without notice.
User’s Manual Appendix A: Technical Specification All specifications are subject to change without notice. Items S Model DR Model CAMERA NTSC 380k Effective Pixels PAL 440k NTSC 470 TV lines 470 TV lines Horizontal Resolution PAL 460 TV lines 470 TV lines Scanning Area Progressive 1/4" CCD Progr...
Page 42 - OSD Menu Notes
User’s Manual OSD Menu Notes The following OSD menu tables are provided for users to record the dome settings. Item Layer 1 Layer 2 Layer 3 Note DEFAULT CAMERA <ON>, <OFF> ON BLC Level <000> ~ <100> BACKLIGHT OFF AUTO Focus Length <1cm>, <10cm>, <30cm> <1...
