Elmo Digital Camera - Manual
Elmo Digital Camera – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
How to Use the Elmo (document camera)
1.
Turn on Elmo – The power switch is located on the left rear side of the base.
2.
Turn on Infocus Projector (ceiling mounted) – Point the Infocus remote at the
front of the projector and press the light blue power button located in the
upper left corner of the remote.
3.
Put something on the Elmo base.
4.
Press the button marked
Internal
located on the front of the Elmo base under
Input.
5.
If there is still no image being projected point the Infocus remote at the
projector and press the
VIDEO
button. It is the middle button in the row of
buttons directly below the power button.
Using Slides/Transparencies with Elmo
1.
Place slide/transparency on Elmo Base.
2.
Turn on Base Lamp – Press the button labeled
Base
under Lamp on the front
of the Elmo Base.
3.
Adjust Zoom – Zoom in or out using the
TELE
and
WIDE
buttons under
Zoom on the front of the Elmo Base.
4.
To Adjust focus you can use the manual focus by pressing the
N
or
F
button
under Focus on the front of the Elmo Base or you can press the
AUTO
button
to the right of the F button and Elmo will automatically focus the image for
you.
Using Books, Notes, or 3-D Objects with Elmo
1.
Place item on Elmo Base.
2.
Turn on upper lamp – Press the button labeled Upper under Lamp on the front
of the Elmo Base.
3.
Adjust lamps for best light.
4.
Adjust Zoom and Focus as above.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
