Page 2 - Features and Design; • The contents of this manual are subject to change without notice.
2 Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ♦ Compact Design Th...
Page 3 - Table of Contents; Trademarks
3 Table of Contents Trademarks Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. Features and Design . . . . . . . . . . . . . . . . . . .2Table of Contents . . . . . . . . . . . . . . . . . . . . . .3To the Owner . . . ...
Page 4 - To the Owner; RISK OF ELECTRIC SHOCK; Safety Precaution; CAUTION; READ AND KEEP THIS OwNER'S MANUAL FOR; CAUTION
4 To the Owner CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN ...
Page 5 - Safety Instructions; NOTE FOR CUSTOMERS IN THE US
5 Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth fo...
Page 6 - Moving the Projector; Installing the Projector in Proper Position; CAUTION IN CARRyING OR TRANSPORTING
6 Safety Instructions Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector, the f...
Page 7 - Compliance; Federal Communications Commission Notice; AC Power Cord for the United States and Canada:; AC Power Cord Requirement; AC Power Cord for the United Kingdom:
7 Safety Instructions Compliance Federal Communications Commission Notice Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferen...
Page 8 - Part Names and Functions; Front; Bottom
8 Part Names and Functions ⑤ ⑦ ⑧ ③ ② Front Back ⑥ ① Top controls and Indicators ② Zoom Ring ③ Focus Ring ④ Speaker ⑤ Infrared Remote Receiver ⑥ Projection Lens ⑦ Lens Cap (See page 60 for attaching.) ⑧ Air Intake Vent ⑨ Lamp Cover ⑩ Terminals and Connectors ⑪ LAN Connection Terminal ⑫ Power Cord Con...
Page 12 - Two AAA size batteries; Remote Control Operating Range; Code; Remote Control Code
12 Part Names and Functions To ensure safe operation, please observe the following precautions : ● Use two (2) AAA or LR03 type alkaline batteries. ● Always replace batteries in sets. ● Do not use a new battery with a used battery. ● Avoid contact with water or liquid. ● Do not expose the remote con...
Page 13 - Positioning the Projector; Installation
13 Positioning the Projector For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. Installation Note: • The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to o...
Page 14 - Cables used for connection; • Audio Cables
14 Installation Connecting to a Computer Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. Cables used for connection • VGA Cables (Mini D-sub 15 pin) • VGA/DC power combined cord (supplied) • Audio Cables Note: • Input sound to the AU...
Page 15 - • Video Cable
15 Installation Connecting to Video Equipment Cables used for connection • Video Cable • S-Video Cable • S-Video-VGA Cable • Audio Cables (Mini Plug: stereo) (Cables are not supplied with the projector. ) Note: • When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. ...
Page 16 - • See page 72 for ordering optional cables.; • Component Cable
16 Installation Connecting to Component Video and RGB ( Scart) Equipment Note: • When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. • See page 72 for ordering optional cables. Cables used for connection • Audio Cables (Mini Plug: stereo) • Scart-VGA Cable • Compon...
Page 17 - Note; NOTE ON THE POwER CORD; Projector side; For Continental Europe
17 Installation Connecting the AC Power Cord This projector uses nominal input voltages of 100-120 V or 200–240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical sh...
Page 18 - Turning On the Projector; Basic Operation; Off; Project Computer
18 The preparation display will disappear after 30 seconds. (See page 52 for Lamp control status.) Turning On the Projector Connect the projector’s AC power cord into an AC outlet. The POWER indicator lights red. Open the lens cap (see pages 8, 60). Press the ON/STAND-BY button on the top control or...
Page 19 - Enter a PIN code; Set; CAUTION ON HANDLING PIN CODE; PIN Code Input Dialog Box; • If the PIN code number is not entered within three
19 what is PIN code? PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector. Setting a PIN code prevents unauthorized use of the projector. A PIN code consists of a four-digit number. Refer to the PIN code lock function in the Settin...
Page 20 - Turning Off the Projector; On
20 TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU TURN THE PROJECTOR ON, WAIT AT LEAST FIVE MINUTES BEFORE TURNING IT OFF. Turning Off the Projector Note: • When the On start function is set to On , the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.50). •...
Page 21 - Top Control
21 Basic Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. The menus have a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer t...
Page 22 - Menu Bar; For detailed functions of each menu, see “Menu Tree” on pages 67-68.
22 Menu Bar For detailed functions of each menu, see “Menu Tree” on pages 67-68. Basic Operation ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ Main Menu Sub-Menu ⑨ ⑩ ③ Image select For computer source, used to select an image mode from among Dynamic , Standard , Real , Blackboard(Green) , Colorboard and image 1 - 4 (p.32). For V...
Page 23 - Keystone Correction; Remote Control; • Auto Keystone corrects vertical distortion only it does; • Perfect correction of the image distortion cannot be; Fine sync; Auto Setup Function
23 Basic Operation Rotate the Zoom Ring to zoom in and out. Rotate the Focus Ring to adjust the focus of the image. Zoom and Focus Adjustment If a projected picture still has keystone distortion after pressing the AUTO SETUP button on the top control or the AUTO SET button on the remote control, cor...
Page 24 - Sound Adjustment; Direct Operation
24 Sound Adjustment 1 2 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Sound . Press the Point ► or the SELECT button to access the submenu items. Press the VOLUME+/– buttons on the top control or on the remote control to adjust the volume. The volume dialog ...
Page 25 - LAMP button
25 Basic Operation Remote Control Operation Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. Press the COMPUTER 1/2, VIDEO, S-VIDEO and COMPONENT button...
Page 26 - NO SHOw button; No show; SCREEN button
26 Basic Operation black out → normal → black out → normal • • • • • Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. The screen changes each time you press the NO SHOW button as follows. NO SHOw bu...
Page 27 - Input Menu; Computer Input; COMPUTER 1 button; Input; COMPUTER 2 button
27 Choose either Computer 1(RGB) or Computer 2(RGB) by pressing the COMPUTER 1 or Computer 2 button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below. 1 Input Menu 23 Computer Input COMPUTER 1 button Note: When the ...
Page 28 - PC System Menu; Computer System Selection; Auto; Selecting Computer System Manually; Mode
28 Computer Input PC System Menu PC System Menu Computer System Selection This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA, UXGA or WUXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projecto...
Page 29 - PC adjust Menu; Auto PC Adjustment; • The Auto PC Adjustment cannot be operated when; Menu Operation; Auto PC
29 Computer Input Auto PC Adjustment function is provided to automatically adjust Fine sync , Total dots , Horizontal and Vertical positions to conform to your computer. PC adjust Menu Auto PC Adjustment To store adjustment parameters The adjusted parameters from the Auto PC Adjustment can be stored...
Page 30 - Manual PC Adjustment
30 Computer Input PC adjust Menu Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent ...
Page 31 - Total dots
31 Computer Input Store To store the adjusted data, select Store and then press the Point ► or the SELECT button. Move the highlight to one of the Modes 1 to 5 in which you want to store, and then press the SELECT button. Mode free To clear the stored data, select Mode free and then press the Point ...
Page 32 - Image select Menu; Image Mode Selection
32 Computer Input Image select Menu IMAGE button Dynamic Real Image 1 Image 2 Image 3 Image Mode Selection Image 4 Blackboard(Green) Standard Remote Control IMAGE button Select the desired image mode among Dynamic , Standard , Real , Blackboard (Green) , Colorboard , Image 1 , Image 2 , Image 3 and ...
Page 33 - Image Adjust Menu; Image Adjustment; • When White balance
33 Computer Input Image Adjust Menu Image Adjustment Reset Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image adjust and then press the Point ► or the SELECT button. 1 2 Use the Point ▲▼ buttons select the desired item and then press the SELECT button to di...
Page 34 - Screen Menu; Screen Size Adjustment; • The Screen Menu,; yes
34 Computer Input Store This projector has the picture screen resize function, which enables you to customize the image size. Screen Menu Screen Size Adjustment Provide the image to fit the screen size. Normal True Provide the image in its original size. When the original image size is larger or sma...
Page 35 - • The minimum compression ratio is limited; Normal
35 Computer Input Select Digital zoom + . The On-Screen Menu disappears and D. zoom + appears. Press the SELECT button to expand the image size. Use the Point ▲▼◄► buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be als...
Page 36 - Video Input; VIDEO button; Computer
36 Choose Video or S-video by pressing the VIDEO or the S-VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. 1 2 Input Menu Input Source Selection (Video, S-video) Video Input Direct Operation Menu Operat...
Page 37 - COMPONENT button
37 Video Input Choose Computer 1(Component) or Computer 1(Scart) by pressing the COMPONENT or the COMPUTER 1 button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below. 1 Input Menu 2 Use the Point ▲▼ buttons to select ...
Page 40 - • When the
40 Video Input Image Adjustment 1 2 Press the Point ◄ button to decrease the contrast; press the Point ► button to increase the contrast (from 0 to 63). Press the Point ◄ button to decrease the brightness; press the Point ► button to increase the brightness (from 0 to 63). Contrast Brightness Press ...
Page 41 - Store Menu
41 Video Input Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Gamma Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 15). Sharpness An interlaced vide...
Page 43 - Setting; Setting Menu
43 Setting Setting Language The language used in the On-Screen Menu is available in English , German , French , Italian , Spanish , Portuguese , Dutch , Swedish , Finnish , Polish , Hungarian , Romanian , Russian , Turkish , Kazakh , Chinese , Korean , japanese , and Thai . Setting Menu Press the ME...
Page 44 - Auto setup
44 Setting Note: • Auto Keystone corrects vertical distortion only, not correct horizontal distortion. • The Auto Keystone function cannot work when the Ceiling feature is set On in the Setting menu (p.49). • Perfect correction of the image distortion cannot be ensured with the Auto setup function...
Page 45 - Keystone
45 Setting Keystone This function is used to store or reset the keystone correction when the AC power cord is unplugged. Store ....... Keep the keystone correction even when the AC power cord is unplugged. Reset ....... Release the keystone correction when the AC power cord is unplugged. To correct ...
Page 46 - Logo select
46 Setting Logo (Logo and Logo PIN code lock settings) Logo select This function allows you to customize the screen logo with Logo select , capture , Logo PIN code lock and Logo PIN code change functions. Note: When On is selected in the Logo PIN code lock function, Logo select and Capture functio...
Page 47 - Capture
47 Setting Capture Capture This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations. Select Capture and press the SELECT button. A confirmation box appears and select yes to capture the projected image. After capturing the project...
Page 48 - Enter a Logo PIN code; Change the Logo PIN code lock setting
48 Setting Enter a Logo PIN code Use the Point ▲▼ buttons to enter a number. Press the Point ◄► buttons to fix the number and move the red frame pointer to the next box. The number changes to . If you fixed an incorrect number, use the Point ◄► buttons to move the pointer to the number you want to...
Page 49 - Ceiling
49 Setting Ceiling Rear Ceiling When this function is set to On , the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to On , the picture will be left/right reversed. This function is use...
Page 50 - Power management; • When
50 Setting Power management Time left before Lamp is off. Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period. Select one of the following options: Re...
Page 52 - Remote control; Lamp control; Lamp life control; • If
52 Setting Remote control This function allows you to change brightness of the screen. Lamp control Remote control Lamp life control Lamp control Select the lamp operation when the total lighting time of a lamp exceeds the recommended total hours of use. Mode 1 .............. The lamp can be turned ...
Page 53 - Key lock; Key lock; PIN code lock
53 This function locks the top control and remote control buttons to prevent operation by unauthorized persons.Select Key lock and then press the SELECT button, and select the desired item by pressing the Point ▲▼ buttons. ..... Unlocked. ..... Lock the operation of the top control. To unlock, use t...
Page 54 - Change the PIN code lock setting; Change the PIN code
54 Setting Use the Point ▲▼ buttons to select Off , On1 or On2 , and then press the SELECT button to make a choice. Change the PIN code lock setting Enter a PIN code Use the Point ▲▼ buttons to enter a number. Press the Point ◄ ► buttons to fix the number and move the red frame pointer to the next b...
Page 55 - Lamp counter
55 Setting This function provides the following options in the cooling fans’ operation when the projector is turned off (p.20). L1 ...... Normal operation L2 ...... Slower and lower-sound than the normal operation ( L1 ), but it takes more time to cool the projector down. Fan This projector provides...
Page 56 - Factory default; Timer
56 Setting Factory default This function returns all setting values except for the User logo , PIN code lock , Logo PIN code lock , Lamp counter and Filter counter to the factory default settings. Factory default warning log This function records anomalous operations while the projector is in operat...
Page 57 - Information; Input Source Information Display; Information Menu
57 Information Input Source Information Display The Information Menu is used for checking the status of the image signal being projected and the operation of the projector. H-sync freq. V-sync freq. Lamp counter Information Menu The horizontal frequency of the input signal is displayed in KHz , or -...
Page 58 - wARNING indicator; Maintenance and Cleaning; Then check the matters below:
58 The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance. wARNING indicator The projector is shut down and the wARNING indicator is blinking red. When the temperature inside the ...
Page 59 - Filter counter; Cleaning the Filters
59 Maintenance and Cleaning Turn off the projector, and unplug the AC power cord from the AC outlet.Remove the panel front assembly by pulling the latch horizontally. Remove the panel net by pulling the latch horizontally and then remove it leftward. 12 Filter prevents dust from accumulating on the ...
Page 61 - Lamp Replacement; LAMP REPLACE; Lamp replacement icon; Reset the lamp replacement counter.
61 Maintenance and Cleaning When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights yellow. Replace the lamp with a new one promptly. The timing when the LAMP REPLACE indicator should light is depending on t...
Page 62 - than other similar lamps.; LAMP HANDLING PRECAUTIONS; ORDER REPLACEMENT LAMP; information to the dealer.; Model No. of your projector
62 Maintenance and Cleaning This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard. ● Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee of th...
Page 63 - Appendix; Troubleshooting
63 Problem: – Solutions No power – Plug the power cord of the projector into the AC outlet. – See if the POWER indicator lights red. – Wait until the POWER indicator stops blinking to turn on the projector again. The projector can be turned on after the POWER indicator turns red. See page 18. – Chec...
Page 69 - Projector Condition; Indicators; Indicators and Projector Condition
69 Check the indicators for projector condition. • • • green. • • • red • • • off • • • blinks green. When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. (pp. 55, 61) The p...
Page 70 - and less than 140 MHz of Dot Clock.; The specifications are subject to change without notice.
70 Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited. ON-SCREEN DISPLAy RESOLUTION H-Freq. (KHz) V-Freq. (...
Page 72 - Accessories
72 Appendix Model No. COMPONENT-VGA Cable : POA-CA-COMPVGA S-video-VGA Cable : POA-CA-VGAS SCART-VGA Cable : POA-CA-SCART VGA-Cable (10 m) : KA-MC-DB10 The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales dealer. Optional Parts ...
Page 73 - conformance with PJLink Standard Class 1.; Pj Link Notice
73 Appendix This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. For PJ Link password, see the...
Page 74 - LAN TERMINAL
74 Appendix COMPUTER IN 1/S-VIDEO/COMPONENT IN /MONITOR OUT (ANALOG)Terminal: Analog RGB (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Configurations of Terminals Red/Cr/S-C Input/Output Ground (Horiz.sync.) Green/Y/S-Y Input/Output ----- Blue/Cb/--- Input/Output Ground (Red)Ground (Green)...
Page 75 - Put the label below (supplied) on in a prominent place of the; Logo PIN Code Lock No.; the factory set number will be invalid.
75 Appendix Appendix Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Number Memo Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* Put...
Page 77 - Germany
KR5AF OVERSEAS SUBSIDIARy COMPANIES U.S.A. ELMO USA CORP. Headquarters 1478 Old Country RoadPlainview, NY 11803-5034, U.S.ATel:(516) 501-1400 Fax:(516) 501-0429E-mail: [email protected]: http://www.elmousa.com west Coast Branch Cypress Pointe Business Park5676 Corporate AvenueCypress, CA 90630, U....
