Page 2 - Technical Specifications; CONTENTS
2 Instructions for the User Important Safety Instructions 3 Operation 5 Before use 5 Freezer controls 5 Starting your appliance 5 Temperature control 5 Warning light (red) 5 Temperature acoustic alarm 5 Freezing fresh food 5 Frozen food storage 6 Thawing 6 Ice making 6 Health and safety guidelines 7...
Page 3 - IMPORTANT SAFETY INSTRUCTIONS
Prior to Installation ¥ Check the appliance for transport damage. Underno circumstance should a damaged appliance beinstalled. In the event of damage please contactyour retailer. Installation ¥ This appliance is heavy. Care should be taken whenmoving it. ¥ It is dangerous to alter the specifications...
Page 5 - OPERATION; Freezer controls
➃ Warning light (red) ➄ Pilot light (green) ➅ Push button ON/OFF ➆ Thermostat control knob ➀ Symbol for audible alarm (temperature warning - only for EUU1172) ➁ Push button for fast-freezing ➂ Fast-freezing indicator light (yellow) 5 OPERATION Freezer controls Before use Remove all securing tapes. W...
Page 6 - Thawing; Frozen food storage; Making ice cubes
Thawing Frozen food, prior to being used, can be thawed in thefridge or at room temperature depending on the timeavailable. Small food items may even be cooked fromfrozen; in this case cooking will take longer. Any frozen food which is allowed to thaw accidentallyshould either be eaten as soon as po...
Page 7 - HEALTH AND SAFETY GUIDELINES
7 Because of consumer demand, preservatives have been removed from many pre-prepared foods. Thistogether with the changes in shopping habits to a once-a-week shop, mean that safe handling andstorage of food is even more important than ever.The following tips should help you to ensure that the food i...
Page 8 - DEFROSTING
8 The freezer compartment will become progressivelycovered with frost. This should be removed with thespecial plastic scraper provided, whenever the thick-ness of the frost exceeds 1/4". During this operation it is not necessary to switch offthe power supply or to remove the foodstuffs.However, ...
Page 9 - Internal cleaning; Periodic cleaning; MAINTENANCE AND CLEANING
Warning Before any maintenance or cleaning work iscarried out, DISCONNECT the appliancefrom the ELECTRICITY supply. Important This appliance contains hydrocarbons in itscooling unit maintenance and rechargingmust therefore only be carried out by autho-rised technicians. Internal cleaning Clean the i...
Page 10 - SOMETHING NOT WORKING?
10 If after the above checks, there is still a fault, call your local Service Force Centre. In-guarantee customers should ensure that the above checks have been made as the engineer will make acharge if the fault is not a mechanical or electrical breakdown. Please note that proof of purchase is requ...
Page 12 - GUARANTEE CONDITIONS; Standard guarantee conditions; European Guarantee
12 GUARANTEE CONDITIONS Standard guarantee conditions We, Electrolux, undertake that if within 12 months of the date of purchase this Electrolux appliance or any partthereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repairor replace the same ...
Page 13 - TECHNICAL SPECIFICATIONS; Positioning; INSTALLATION
13 DIMENSIONS Height 81,5 cm Width 59,6 cm Depth 54 cm POWER SUPPLY VOLTAGE AND FREQUENCY 220-240 V / 50 Hz TOTAL POWER ABSORBED 90 W AVERAGE DAILY UNITS ELECTRICITY (*) 0,78 kWh GROSS CAPACITY 108 l NET CAPACITY 100 l STAR RATING (*)This figure is based on standard test results in accordance with E...
Page 14 - ELECTRICAL CONNECTION
14 ELECTRICAL CONNECTION WARNINGTHIS APPLIANCE MUST BE EARTHED.The manufacturer declines any liabilityshould this safety measure not beobserved. If the plug that is fitted to your appliance is not suitablefor your socket outlet, it must be cut off and theappropriate plug fitted. Remove the fuse from...
Page 15 - BUILDING-IN INSTRUCTIONS; Door reversal
15 6 8 7 2 BUILDING-IN INSTRUCTIONS Door reversal To reverse the opening direction of the door, proceed asshown in the figures: Before carrying out any work, remove the plug fromthe power socket. Grid preparation Left door opening: Remove the left side (A) of the grid cutting it from therear (see fi...
Page 16 - Building the appliance in under a worktop
16 3 10 11 9 12 13 Attention After completion of the door reversing opera-tion, check that the door gasket adheres to thecabinet. If the ambient temperature is cold (i.e.in Winter), the gasket may not fit perfectly tothe cabinet. In that case, wait for the natural fit-ting of the gasket or accelerat...
Page 18 - clic
18 7. Screw appliance into place and retain the cabinet with screws through the securing brackets into theworktop or adjacent woodwork as necessary. 8. To mount the furniture door proceed as shown in the figures: 6 a b 10 1 2 3 4 C 7 8 a b clic clic c C C 5
Page 20 - Fitting the plinth
20 Fitting the plinth Important For the efficient operation of the appliance, it is important that the original ventilation grid isused. ¥ For an opening height dimension A=820 mm and aplinth height dimension a=100 mm, the plinth maybe fitted without adjustments. The same applies toan opening height...