Page 3 - CONTENTS
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 3 www.ElationLighting.com CONTENTS 1. General Information……………………………………………………………………… 4 a. Introduction………………………………………………………………………. 4 b. Unpacking………………………………………………………..…………..….. 4 c. Customer Support…………………………………………….………………… 4 d. Warranty R...
Page 4 - GENERAL INFORMATION; INTRODUCTION
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 4 www.ElationLighting.com 1. GENERAL INFORMATION INTRODUCTION : Congratulations, you have just purchased one of the most innovative and reliable lighting fixtures on the market today! The Design Wash LED Pro, ™ has been designed to perform ...
Page 5 - yourself, doing so will void your manufactures warranty.
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 5 www.ElationLighting.com yourself, doing so will void your manufactures warranty. Please do not discard the shipping carton in the trash. Please save for return shipping in the event service is ever needed or recycle the container whenever...
Page 6 - SAFETY INSTRUCTIONS; Damages resulting from the disregard of safety and general user
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 6 www.ElationLighting.com 2. SAFETY INSTRUCTIONS The Design Wash LED Pro ™ is an extremely sophisticated piece of electronic equipment. To guarantee a smooth operation, it is important to follow the guidelines in this manual. Elation will n...
Page 7 - rated
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 7 www.ElationLighting.com 3. FEATURES • Pan 540° or 630˚ (User selectable) / Tilt 265° • 9˚ Beam Angle / 23˚ Field Angle • Phillips Rebel LED Light Source • 50,000 hours rated LED life • Smooth additive RGBW color mixing, 16.7 million color...
Page 8 - GENERAL GUIDELINES; This fixture was designed for indoor use only.
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 8 www.ElationLighting.com 4. GENERAL GUIDELINES This fixture is a professional lighting effect designed for use on stage, in nightclubs, in theatres, etc. Do not attempt operation or installation without a proper knowledge on how to do so. ...
Page 9 - Wireless DMX Antenna
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 9 www.ElationLighting.com 5. FIXTURE OVERVIEW 1. LED Assembly 2. Yoke Assembly 3. Wireless DMX Antenna 4. Menu Button 5. Up Button 6. Down Button 7. Enter Button 8. LCD Menu Display 9. Carrying Handle 10. Cooling /Fan Assembly 11. 3-Pin DMX...
Page 10 - Wireless Antenna –
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 10 www.ElationLighting.com 1. LED Assembly – 108 Philips Rebel LEDs comprise the LED assembly. 52 Red, 22 Green, 22 Blue, and 12 White. 2. Yoke Assembly – This assembly consist of the electronics and motors that control the tilt movement as...
Page 11 - Fuse Holder Assembly –
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 11 www.ElationLighting.com fixture in the DMX chain via a female, 3-pin XLR jack. 12. 3-PIN DMX Input Jack – This jack accepts an incoming DMX signal via a male, 3-pin XLR jack. 13. Battery On/Off Button – This button is used to turn the di...
Page 12 - MOUNTING AND INSTALLATION; areas were the fixture might be reached by unauthorized personal.; When install the fixture be sure there is no highly inflammable; Mounting; qualified staff should attempt installation.
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 12 www.ElationLighting.com 6. MOUNTING AND INSTALLATION Cautions: For added protection mount the fixtures in areas outside walking paths, seating areas, or in areas were the fixture might be reached by unauthorized personal. Before mounting...
Page 13 - Mounting points; Be sure a qualified electrician performs all electrical; power cord to the appropriate wall outlet.
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 13 www.ElationLighting.com Mounting points Overhead mounting requires extensive experience, including amongst others calculating working load limits, a fine knowledge of the installation material being used, and periodic safety inspection o...
Page 14 - Clamp Mounting; The Design Wash LED Pro; Securing the Design Wash LED Pro; always be
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 14 www.ElationLighting.com Clamp Mounting The Design Wash LED Pro ™ provides a unique mounting bracket assembly that integrates the bottom of the base, the included “Omega Bracket,” and the safety cable rigging point in one unit (see the il...
Page 15 - UNDERSTANDING DMX; Your
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 15 www.ElationLighting.com 7. UNDERSTANDING DMX DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used by most lighting and controller manufactures as a form of communication between intelligent fixtures and controll...
Page 16 - the Elation Opto Branch 4TM or DMX Branch/4TM.
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 16 www.ElationLighting.com must be daisy chained and cannot be split, unless using an approved DMX splitter such as the Elation Opto Branch 4™ or DMX Branch/4™. Be sure to follow the above figure when making your own cables. Do not use the ...
Page 17 - DMX-512 connection with DMX terminator
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 17 www.ElationLighting.com DMX-512 connection with DMX terminator A DMX terminator should be used in all DMX lines especially in longer runs. The use of a terminator may avoid erratic behavior in your DMX line. A terminator is a 120 ohm 1/4...
Page 19 - OK
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 19 www.ElationLighting.com 8. FIXTURE MENU On-Board System Menu: The Design Wash LED Pro ™ comes with an easy to navigate system menu. This next section will detail the functions of each command in the system menu. LCD Control Panel: The co...
Page 21 - This function is used to set or; “Value Display” - Display the DMX 512 value of each channel
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 21 www.ElationLighting.com Select Programs Auto Pro Part 1 Auto Pro Part 2 Auto Pro Part 3 Program 1 ~ 10 Program 1 Program 1 ~ 10 Program 2 Program 1 ~ 10 Program 3 Select programs to be run Edit Program Program 1 : Program 10 Program Test...
Page 23 - Timer Password
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 23 www.ElationLighting.com Timer Password This function allows the last run hours to reset to zero. Clear Last Run This function resets the “Last Run Hours” hour calculator. This procedure tracks the run between service cycles. • Select “Cl...
Page 24 - No DMX Status –
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 24 www.ElationLighting.com the fixture. RDMX is on by default. For operational instructions please see Section 10/Page 34 of this manual “Remote DMX addressing.” No DMX Status – This function dictates how the fixture will function if it loo...
Page 25 - Feedback –
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 25 www.ElationLighting.com Feedback – This function turns the feedback correction on or off. This function is set to “ON” as default. This function allows for automatic pan and tilt correction in the event either one disrupted during normal...
Page 27 - Reset Pan and Tilt:
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 27 www.ElationLighting.com each available selection. ! Reset All: This function will reset all internal motors to the home position. ! Reset Pan and Tilt: This function will only reset the pan and tilt motors to the home position. 8.6 Effec...
Page 29 - Setting the DMX address -
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 29 www.ElationLighting.com 9. DMX ADDRESSING Setting the DMX address - After the fixture is turned “ON” it will immediately complete a reset process that test all the fixture’s functions. When the reset process concludes the LCD will displa...
Page 30 - Controller Settings
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 30 www.ElationLighting.com 6. Press ENTER to confirm. 7. Press MODE/ESC to return to the main menu. Controller Settings : 1. Set the DMX value of channel 1 to a value of 7. 2. Set the DMX value of channel 2 to a value of 7 or 8. When channe...
Page 31 - Operating Modes
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 31 www.ElationLighting.com 10. OPERATION Operating Modes : The Design Wash LED Pro™ can operate in six different modes. This next section will detail the differences in the operating modes. • Auto Program Mode (Master) - The fixture will ch...
Page 33 - DMX compliant controller.
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 33 www.ElationLighting.com 11. WORKING WITH BUILT-IN PROGRAMS The fixture comes equipped with a built-in DMX recorder that allows custom programs to be installed and recalled directly from the fixture’s control board. Programs can be create...
Page 34 - Step 1B – Building Scenes from an External DMX Controller
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 34 www.ElationLighting.com lock the value into the scenes memory. You can repeat the procedure for all functions listed below: - “Auto Program” – Allows access to all 16 of the channel’s DMX traits. - “PAN” – pan movement. - “PAN-Fine” – pr...
Page 35 - Step 3 – Playing a Program
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 35 www.ElationLighting.com • Access the main menu and toggle to “Edit Programs” which is menu function 8. • Then tap the “ENTER” button and toggle to “Program 1” menu function 8-2-1. • When you get to the “Program 1” function tap the “ENTER...
Page 36 - When the WDMX system is activate the link between the built-in; Never connect a fixture to a controller via a DMX cable when; transmitter to your DMX controller.
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 36 www.ElationLighting.com 12. BUILT-IN WIRELESS RECIEVER The Design WASH LED Pro comes equipped with an Elation Wireless DMX Receiver built-in. This receiver is fully compatible with your existing Elation Wireless DMX System. 12.1 Working ...
Page 37 - DMX signal from a controller.
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 37 www.ElationLighting.com on the both the fixture and the transmitter will stop flashing and glow solid green. If the paring is unsuccessful repeat the process until the paring is secured. d) The fixture will store the pairing information ...
Page 38 - CHANNEL 6: Green LEDs
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 38 www.ElationLighting.com 13. DMX CHANNEL TRAITS: The chart below details the channel layout for 13 DMX channels (default). In 8bit mode the “Pan Fine” and “Tilt Fine” channels are not used, thus converting the fixture into a 11-channel DM...
Page 39 - DMX channel function and values:; Channel 2 – Pan fine
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 39 www.ElationLighting.com DMX channel function and values: DMX Values (13 DMX channels): Channel 1 - PAN movement 8bit: 0-255 Pan Movement (630˚/540˚) Channel 2 – Pan fine 0-255 Fine control of Pan movement Channel 3 - TILT movement 8bit: ...
Page 41 - and ”05Er” flash repeated 5 times.
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 41 www.ElationLighting.com 14. ERROR CODES: When power is applied, the unit will automatically enter a “reset/test” mode. This mode brings all the internal motors to a home position. If there is an internal problem with one or more of the m...
Page 42 - CLEANING AND MAINTENANCE; The following points have to be considered during the inspection:; Disconnect from mains before starting maintenance operation.
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 42 www.ElationLighting.com 15. CLEANING AND MAINTENANCE The following points have to be considered during the inspection: 1. Be sure all screws and fasteners are securely tightened at all times. Lose screws may fall out during normal operat...
Page 45 - CIRCUIT SCHEMATICS
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 45 www.ElationLighting.com 18. CIRCUIT SCHEMATICS
Page 48 - TECHNICAL SPECIFICATIONS
Design Wash LED Pro™ ©Elation Professional, Los Angeles Ca. 48 www.ElationLighting.com 20. TECHNICAL SPECIFICATIONS Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice. Power supply Power Requirements 100~240v...
Page 52 - Elation Professional
Version 1.0 Elation Professional ® 6122 S. Eastern Ave. Los Angeles, CA. 90040 323-582-3322 / 323-832-9142 fax www.ElationLighting.com / [email protected]
