Page 3 - CONTENTS
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 3 www.ElationLighting.com CONTENTS 1. General Information……………………………………………………………………… 4 a. Introduction………………………………………………………………………. 4 b. Unpacking………………………………………………………..…………..….. 4 c. Customer Support…………………………………………….………………… 4 d. Warranty Registrati...
Page 4 - GENERAL INFORMATION; INTRODUCTION
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 4 www.ElationLighting.com 1. GENERAL INFORMATION INTRODUCTION : Congratulations, you have just purchased one of the most innovative and reliable lighting fixtures on the market today! The E Spot Led, ™ has been designed to perform reliably for years...
Page 5 - yourself, doing so will void your manufactures warranty.
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 5 www.ElationLighting.com rain or moisture. Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will void your manufactures warranty. Please do not discard the shipping carton in the trash. Pl...
Page 6 - SAFETY INSTRUCTIONS; Damages resulting from the disregard of safety and general user
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 6 www.ElationLighting.com 2. SAFETY INSTRUCTIONS The E Spot Led ™ is an extremely sophisticated piece of electronic equipment. To guarantee a trouble free operation, it is important to follow the guidelines in this manual. Elation will not accept re...
Page 7 - rated
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 7 www.ElationLighting.com 3. FEATURES • Pan 540° or 630˚ (User selectable) / Tilt 270° • 15˚ Beam Angle • Low Power Consumption • 60 WATT White LED Source (Over 2,200 lumens from a single chip) • 60,000 hours rated LED life • Color Wheel: 8 colors p...
Page 8 - GENERAL GUIDELINES; This fixture was designed for indoor use only.
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 8 www.ElationLighting.com 4. GENERAL GUIDELINES This fixture is a professional lighting effect designed for use on stage, in nightclubs, in theatres, etc. Do not attempt operation or installation without a proper knowledge on how to do so. This fixt...
Page 9 - LCD Menu Display
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 9 www.ElationLighting.com 5. FIXTURE OVERVIEW 1. LED Assembly 2. LCD Menu Display 3. Mode/Esc Button 4. Up Button 5. Down Button 6. Enter Button 7. Microphone 8. Carrying Handle 9. 3-Pin DMX Output 10. 3-Pin DMX Input 11. 5-Pin DMX Output 12. 5-Pin ...
Page 10 - Carrying Handle –
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 10 www.ElationLighting.com 1. LED– Extremely high optical LED output, Over 2,200 lumens from a sin-gle chip (White) 2. LED Menu Display - 4-segment menu display. Used to display the DMX address as well as all other menu functions. 3. Mode/Esc Button...
Page 11 - Controls main power to the unit.; Fuse Holder Assembly –; This assembly houses the 4amp GMA safety fuse. Always
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 11 www.ElationLighting.com 13. Power Switch – Controls main power to the unit. 14. Fuse Holder Assembly – This assembly houses the 4amp GMA safety fuse. Always replace the fuse with an exact match unless otherwise specified by an authorized Elation ...
Page 12 - MOUNTING AND INSTALLATION; areas were the fixture might be reached by unauthorized personal.; When install the fixture be sure there is no highly inflammable; Mounting; qualified staff should attempt installation.
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 12 www.ElationLighting.com 6. MOUNTING AND INSTALLATION Cautions: For added protection mount the fixtures in areas outside walking paths, seating areas, or in areas were the fixture might be reached by unauthorized personal. Before mounting the fixt...
Page 13 - Mounting points; Be sure a qualified electrician performs all electrical; power cord to the appropriate wall outlet.; Clamp Mounting
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 13 www.ElationLighting.com Mounting points Overhead mounting requires extensive experience, including amongst others calculating working load limits, a fine knowledge of the installation material being used, and periodic safety inspection of all ins...
Page 14 - The E Spot Led; Securing the E Spot Led; Regardless of the rigging option you choose for your E Spot Led
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 14 www.ElationLighting.com The E Spot Led ™ provides a unique mounting bracket assembly that integrates the bottom of the base, the included “Omega Bracket,” and the safety cable rigging point in one unit (see the illustration below). When mounting ...
Page 15 - UNDERSTANDING DMX; Your
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 15 www.ElationLighting.com 7. UNDERSTANDING DMX DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used by most lighting and controller manufactures as a form of communication between intelligent fixtures and controllers. DMX ...
Page 16 - the Elation Opto Branch 4TM or DMX Branch/4TM.
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 16 www.ElationLighting.com the Elation Opto Branch 4™ or DMX Branch/4™. Be sure to follow the above figure when making your own cables. Do not use the ground lug on the XLR connector. Do not connect the cable’s shield conductor to the ground lug or ...
Page 17 - DMX-512 connection with DMX terminator
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 17 www.ElationLighting.com DMX-512 connection with DMX terminator A DMX terminator should be used in all DMX lines especially in longer runs. The use of a terminator may avoid erratic behavior in your DMX line. A terminator is a 120 ohm 1/4 watt res...
Page 18 - During start-up the E Spot Led
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 18 www.ElationLighting.com out from the DMX controller. The allocation of this starting DMX address is achieved by setting the correct DMX address on the digital display located on the base of the fixture. You can set the same starting address for a...
Page 19 - OK
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 19 www.ElationLighting.com 8. FIXTURE MENU On-Board System Menu: The E Spot Led ™ comes with an easy to navigate system menu. This next section will detail the functions of each command in the system menu. LCD Control Panel: The control panel locate...
Page 20 - Main Menu Functions
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 20 www.ElationLighting.com GOBO Reset only motors for gobo and rotation OTHR Reset other motors LIFE 0000~9999 Displays the total fixture running time 4 TIME CLMP Clear lamp running time 5 RPAN ON/OFF Reverses the pan movements 6 RTLT ON/OFF Reverse...
Page 21 - RUN
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 21 www.ElationLighting.com 1. Switch on the E Spot Led™ and wait for the fixture reset process to finished. 2. Press the Mode/Esc button to access the main menu. Toggle through the menu by pressing the Up and Down buttons until the display shows A00...
Page 22 - AUDI
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 22 www.ElationLighting.com 4. Tap the UP or DOWN button to select either “Master” or “Alone” and press ENTER. 5. Press MODE/ESC to return to the main menu. AUDI - This feature is used to run the internal preset programs in AUDIO mode in either a Mas...
Page 23 - - Reset all other motors
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 23 www.ElationLighting.com 4. RESE (RESET) MENU - ALL - Resets all the motors in the unit. SCAN - Resets the Pan and Tilt motors. COLR (Color) - Resets the color motors. GOBO - Resets the gobo motors. SHTR - Resets the shutter motors. OTHR - Reset a...
Page 24 - GOBO
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 24 www.ElationLighting.com wheel motor. 1. Access the main menu. 2. Tap the UP button until “RESE” is displayed, press ENTER. 3. Tap the UP button until “COLR” is displayed, then press ENTER to confirm. 4. The display will show “ON/OFF”. Press the U...
Page 25 - CLMP; Please
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 25 www.ElationLighting.com CLMP - Clears the lamp running time. LIFE - With this function you can display the total running time of the fixture. 1. Access the main menu. 2. Tap the UP button until ”TIME” is displayed, press ENTER. 3. Tap the UP butt...
Page 27 - DISPLAY MENU; VALU
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 27 www.ElationLighting.com 6. Press MODE/ESC to return to the main menu. 10. MIC MENU - This function allows for electronic control of the internal microphone’s sound sensitivity. 1. Access the main menu. 2. Tap the UP button until “MIC” is displaye...
Page 28 - – This menu option access all the special functions listed below.
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 28 www.ElationLighting.com two seconds without any menu activity. 5. Press ENTER to confirm. 6. Press MODE/ESC to return to the main menu. FLIP – This function will reverse the display readout buy 180˚. 1. Access the main menu. 2. Tap the UP button ...
Page 29 - Controller Settings; SPOT
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 29 www.ElationLighting.com 4. The display will show “ON/OFF.” 5. Press the UP button to display “ON” to activate this function, or “OFF” to deactivate this function. 6. Press ENTER to confirm. 7. Press MODE/ESC to return to the main menu. Controller...
Page 30 - DFSE; When you confirm this function, the fixture will begin to; FEED
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 30 www.ElationLighting.com DFSE - With this function you can restore the factory default settings of the fixture. All settings will be set back to the default values. Any edited scenes will be lost. When restoring the factory settings the unit must ...
Page 31 - VER
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 31 www.ElationLighting.com 3. Tap the UP or DOWN button until “FANS” is displayed, press ENTER. 4. The display will show “HIGH/AUTO”. 5. Press UP or DOWN button to select “HIGH” or “AUTO”. 6. Press ENTER to confirm. 7. Press MODE/ESC to return to th...
Page 33 - SEPR
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 33 www.ElationLighting.com SEPR - With this function you can Select program to be edit. 1. Access the main menu. 2. Tap the UP button until “EDIT” is displayed, press ENTER. 3. Tap the UP button until “SEPR” is displayed, press ENTER. 4. The display...
Page 34 - Editing procedure 1
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 34 www.ElationLighting.com Editing procedure 1 : Using the control board only. 1. Access the main menu. 2. Tap the UP button until “EDIT” is displayed and press ENTER. 3. The display will show “SC-01”, this stands for the scene number. For example, ...
Page 35 - CEDT
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 35 www.ElationLighting.com memory. The number of steps can be defined under “EDIT” and the scenes can be called up under “Run.” To run the scenes see page 30. Editing procedure 2: Using an external controller. 1. Call up the first scene in your cont...
Page 36 - Setting the DMX address -
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 36 www.ElationLighting.com 9. DMX ADDRESSING Setting the DMX address - After the fixture is turned “ON” it will immediately complete a reset process that test all the fixture’s functions. When the reset process concludes the LCD will display the fix...
Page 38 - into a
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 38 www.ElationLighting.com 10. DMX CHANNEL TRAITS: The chart below details the channel layout for 14 DMX channels (default). In 8bit mode the “Pan Fine” and “Tilt Fine” channels are not used, thus converting the fixture into a 12-channel DMX fixture...
Page 39 - DMX channel function and values:; PAN Movement 8bit
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 39 www.ElationLighting.com DMX channel function and values: DMX channel functions and their values (14 DMX channels): Mode/Channel Value Function St Ba Ex PAN Movement 8bit 1 1 0-255 Pan Movement By 540/630 Pan Fine 16bit 2 0-255 Fine control of Pan...
Page 40 - Rotating gobo index, rotating gobo rotation
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 40 www.ElationLighting.com 160-175 Rotating gobo 6 shake 176-191 Rotating gobo 7 shake 192-255 Rotating gobo wheel cont. rotation slow to fast Rotating gobo index, rotating gobo rotation 0-127 Gobo indexing 128-189 Forwards gobo rotation from fast t...
Page 41 - Speed pan/tilt movement
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 41 www.ElationLighting.com 32-63 No function (shutter open) 64-95 Strobe effect slow to fast 96-127 No function (shutter open) 128-159 Pulse-effect in sequences 160-191 No function (shutter open) 192-223 Random strobe effect slow to fast 224-255 No ...
Page 42 - and ”05Er” flash repeated 5 times.
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 42 www.ElationLighting.com 11. ERROR CODES: When power is applied, the unit will automatically enter a “reset/test” mode. This mode brings all the internal motors to a home position. If there is an internal problem with one or more of the motors an ...
Page 43 - (defective motor or a defective motor IC drive on the main PCB).; Rotating gobo indexing error:; This
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 43 www.ElationLighting.com Color-wheel error: The color wheel is not located in the default position after start-up or after a reset command. This message will appear after a fixture reset if the color wheel’s magnetic-indexing circuit malfunctions ...
Page 44 - CLEANING AND MAINTENANCE; The following points have to be considered during the inspection:
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 44 www.ElationLighting.com 12. CLEANING AND MAINTENANCE The following points have to be considered during the inspection: 1. Be sure all screws and fasteners are securely tightened at all times. Lose screws may fall out during normal operation resul...
Page 48 - CIRCUIT SCHEMATICS
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 48 www.ElationLighting.com 16. CIRCUIT SCHEMATICS
Page 49 - TECHNICAL SPECIFICATIONS; Gobos; Prism; Focus
E SPOT LED™ ©Elation Professional, Los Angeles Ca. 49 www.ElationLighting.com 17. TECHNICAL SPECIFICATIONS Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice. Power supply Power Requirements 100~240v 50/60Hz ...
Page 52 - Elation Professional
Rev. 27/10/2009 – visage Version 1.0 Elation Professional ® 6122 S. Eastern Ave. Los Angeles, CA. 90040 323-582-3322 / 323-832-9142 fax www.ElationLighting.com / [email protected]
