Page 2 - TABLE OF CONTENS
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 1 www.ElationLighting.com TABLE OF CONTENS 1. General Information……………………………………………………………………… 2 a. Introduction………………………………………………………………………. 2 b. Unpacking………………………………………………………..…...………..… 2 c. Customer Support…………………………………………….………………… 2 d. Warra...
Page 3 - GENERAL INFORMATION; INTRODUCTION
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 2 www.ElationLighting.com 1. GENERAL INFORMATION INTRODUCTION : Congratulations, you have just purchased one of the most innovative and reliable LED fixtures on the market today! The Design LED Brick 70,™ has been designed to perform reliably f...
Page 4 - yourself. Doing so will void your manufactures warranty.
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 3 www.ElationLighting.com rain or moisture. Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself. Doing so will void your manufactures warranty. Please do not discard the shipping carton in the tras...
Page 5 - SAFETY INSTRUCTIONS; to allow for proper cooling.
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 4 www.ElationLighting.com 2. SAFETY INSTRUCTIONS To guarantee proper and consistent operation, it is important to follow the guidelines in this manual. Elation Professional will not accept responsibility for damages resulting from the misuse of...
Page 6 - replace it immediately with a new one of similar power rating.
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 5 www.ElationLighting.com sure the power cord is never crimped or damaged. If the power cord is damaged, replace it immediately with a new one of similar power rating. 13. Always disconnect from main power before performing any type of service ...
Page 7 - rated
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 6 www.ElationLighting.com 3. FEATURES • Low power consumption • Smooth Dimming Curve, 0%~100% • Minimal heat emission • Maintenance free operation • 5 Color Additive Color Mixing System (Red, Green, Blue, White, Amber) • 70 3-Watt LEDs (14 x re...
Page 8 - GENERAL GUIDELINES; installation without a proper knowledge on how to do so.
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 7 www.ElationLighting.com 4. GENERAL GUIDELINES This fixture is a professional lighting effect designed for use on stage, in nightclubs, in theatres, and other types of architectural installations. Do not attempt operation or installation witho...
Page 9 - FIXTURE OVERVIEW; This cover holds the lens assemblies in place and protects the; LED Lens Assembly –; The lens assembly may be user replaced in the event repair
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 8 www.ElationLighting.com 5. FIXTURE OVERVIEW 1. Housing Cover – This cover holds the lens assemblies in place and protects the internal electronics, never remove this cover. 2. LED Lens Assembly – The lens assembly may be user replaced in the ...
Page 10 - Hanging Bracket Locking Knob –
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 9 www.ElationLighting.com 3. Bracket– This bracket provides an intergraded floor base as well as a means to pipe mount the fixture. 4. Hanging Bracket Locking Knob – This knob is used to secure the hanging bracket in to place. 5. On/Off Power S...
Page 11 - as all other menu functions.
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 10 www.ElationLighting.com as all other menu functions. 15. 5-pin DMX Out Jack – This jack is used to send an incoming DMX signal to the next fixture in the DMX chain via a female, 5-pin XLR jack. 16. 5-pin DMX In Jack – This jack accepts an in...
Page 12 - MOUNTING AND INSTALLATION; minimum point load of 10 times the device’s weight.; qualified staff should attempt installation.; Mounting points; Be sure a qualified electrician performs all electrical; power cord to the appropriate wall outlet.
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 11 www.ElationLighting.com 6. MOUNTING AND INSTALLATION Cautions: For added protection mount the fixtures in areas outside walking paths, seating areas, and away from areas were the fixture might be reached by unauthorized personal. Before moun...
Page 13 - Mounting; Clamp Mounting
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 12 www.ElationLighting.com Mounting The Design LED Brick 70™ is fully operational in any mounting position, hanging upside-down from a ceiling, side mounted, or set on a flat level surface, etc. Be sure this fixture is kept at least 0.5m away f...
Page 14 - See illustrations below.; Securing the Design Brick 70TM; Always be sure to secure your fixture with a safety cable when
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 13 www.ElationLighting.com When mounting this fixture to truss be sure to secure an appropriately rated clamp to the hanging yoke using a M10 screw fitted through the center hole of the hanging yoke. As an added safety measure be sure to attach...
Page 15 - UNDERSTANDING DMX; the controls on the LED menu.
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 14 www.ElationLighting.com 7. UNDERSTANDING DMX DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used by lighting and controller manufactures as a form of communication between intelligent fixtures and controllers. DMX ...
Page 16 - shield could cause a short circuit and erratic behavior.
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 15 www.ElationLighting.com Be sure to follow the above figure when making your own cables. Do not use the ground lug on the XLR connector. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come in co...
Page 17 - chain to terminate the line. Using a
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 16 www.ElationLighting.com terminator may avoid erratic behavior in your DMX line. A terminator is a 120 ohm 1/4 watt resistor that is connected between pins 2 and 3 of a male XLR connector (DATA + and DATA -). This fixture is inserted in the f...
Page 18 - signal the display will flash repeatedly
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 17 www.ElationLighting.com setting the correct DMX address on the digital display located on the back of the fixture. You can set the same starting address for all fixtures or a group of fixtures, or set different address for each individual fi...
Page 20 - This function is used to set or; “Value Display” - Display the DMX 512 value of each channel
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 19 www.ElationLighting.com ~ Edit Scene 250 Time-- Input By Outside manual scenes edit Rec. Controller XX~XX Automat. scenes rec Remarks: 1) If the fixture does not receive a DMX signal the menu display will flash repeatedly. 2) SPED: Adjust th...
Page 22 - Timer Password
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 21 www.ElationLighting.com Timer Password This function allows the last run hours to reset to zero. Clear Last Run This function resets the “Last Run Hours” hour calculator. This procedure tracks the run between service cycles. • Select “Clear ...
Page 23 - No DMX Status –
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 22 www.ElationLighting.com the fixture. RDMX is on by default. For operational instructions please see Section 9/Page 24 of this manual “Remote DMX addressing.” No DMX Status – This function dictates how the fixture will function if it looses D...
Page 24 - Manual Control
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 23 www.ElationLighting.com 8.4 Manual Control –This function allows the LEDs to be set manually without the use of an external controller 8.5 User Mode Set: 8.5.1 User Mode - This function allows the DMX channels assignment to be changed from t...
Page 25 - Setting the DMX address -
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 24 www.ElationLighting.com 9. DMX ADDRESSING Setting the DMX address - After the fixture is turned “ON” it will immediately complete a reset process that test all the fixture’s functions. When the reset process concludes the LCD will display th...
Page 26 - Controller Settings
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 25 www.ElationLighting.com 7. Press MODE/ESC to return to the main menu. Controller Settings : 1. Set the DMX value of channel 1 to a value of 7. 2. Set the DMX value of channel 2 to a value of 7 or 8. When channel 2 is set to "7" you c...
Page 27 - Operating Modes
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 26 www.ElationLighting.com 10. OPERATION Operating Modes : The Design LED Brick 70™ can operate in six different modes. This next section will detail the differences in the operating modes. • Auto Program Mode (Master) - The fixture will chase ...
Page 28 - For functionality that chases to sound:
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 27 www.ElationLighting.com Program” submenu. See page 18 for the menu breakdown. Once in the “Auto Program” submenu select “Alone” For functionality that chases to sound: Access the “Function” menu and select the “Music Control” function, thi...
Page 29 - Follow the instruction on page 24 to set the DMX address.
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 28 www.ElationLighting.com Follow the instruction on page 24 to set the DMX address. Be sure to use a terminator on the last fixture, especially for longer cable runs (more than a 100 feet). For help operating in DMX mode be sure to consu...
Page 30 - DMX compliant controller.
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 29 www.ElationLighting.com 11. WORKING WITH BUILT-IN PROGRAMS The fixture comes equipped with a built-in DMX recorder that allows custom programs to be installed and recalled directly from the fixture’s control board. Programs can be created an...
Page 31 - Step 1B – Building Scenes from an External DMX Controller.
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 30 www.ElationLighting.com - “RED” – Control over all Red LEDs - “Green” – Control over all Green LEDs - “Blue” – Control over all Blue LEDs - “White” – Control over all White LEDs - “Amber” – Control over all Ambers LEDs - “Strobe” – adjust th...
Page 32 - Step 3 – Playing a Program
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 31 www.ElationLighting.com 64 scenes. Keep in mind that a scene can only be access when it is stored inside one of the 10 available programs. Follow the procedure below to build an internal program: • Access the main menu and toggle to “Edit Pr...
Page 33 - DMX Operation Notes:; note that this will override all manual settings.; DMX CHANNEL TRAITS; Value; Intensity
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 32 www.ElationLighting.com 12. DMX TRAITS DMX Operation Notes: The fixture will function in DMX mode whenever the unit is receiving a DMX signal. Please note that this will override all manual settings. This unit will keep and retain the last D...
Page 35 - LENS REPLACEMENT; changed out to achieve different beam angles.
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 34 www.ElationLighting.com 13. LENS REPLACEMENT The Design Brick 70 comes with a removable front cover that allows lens assembly to be changed out to achieve different beam angles. The lens cover is held in place by two ¼ turn locking fasteners...
Page 36 - CLEANING AND MAINTENANCE; sediments. Never remove the ground prong from the power cable.; Disconnect from mains before starting maintenance operation.; use alcohol or solvents.
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 35 www.ElationLighting.com 14. CLEANING AND MAINTENANCE Consider the following points during normal service and inspection: 1. Be sure all screws and fasteners are securely tightened at all times. Lose screws may fall out during normal operatio...
Page 37 - -YEAR LIMITED WARRANTY
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 36 www.ElationLighting.com 15. 2-YEAR LIMITED WARRANTY A. Elation Professional ® hereby warrants, to the original purchaser, Elation Professional ® products to be free of manufacturing defects in material and workmanship for a period of two yea...
Page 39 - PHOTOMETRIC DATA
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 38 www.ElationLighting.com 16. PHOTOMETRIC DATA
Page 40 - DIMENSIONAL DRAWINGS
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 39 www.ElationLighting.com 17. DIMENSIONAL DRAWINGS
Page 41 - CIRCUIT SCHEMATIC
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 40 www.ElationLighting.com 18. CIRCUIT SCHEMATIC
Page 42 - TECHNICAL SPECIFICATIONS; Power consumption:
DESIGN Brick 70™ ©Elation Professional, Los Angeles Ca. 41 www.ElationLighting.com 19. TECHNICAL SPECIFICATIONS Power supply: 100v~240v / 50Hz~60Hz AC Power consumption: MAXIMUM 250 watts LED Configuration: 70 3Watt DIP (by SSC) 14 x (red, green, blue, white, amber) IP Rating: IP20 Weight: 7.2 Kgs /...
Page 44 - Elation Professional
Rev. 12/18/2009 – visage Software Ver. 1.2 Elation Professional 6122 S. Eastern Ave. Los Angeles, CA. 90040 323-582-3322 / 323-832-9142 fax www.ElationLighting.com / [email protected]
