Elation 36 Tri-Brick - Manual

Design LED 36 Tri-Brick

©Elation Professional • Elation Professional 6122 S. Eastern Ave. Los Angeles, Ca 90040

www.ElationLighting.com • Toll Free (866) 245-6726

The Design LED 36 Tri-Brick (DLED 36 Tri-Brick)by Elation Professional is a high output, compact (fits in 12” box
truss), LED color changer featuring seamless RGB color mixing using 12 x “Tri-color” 3W LEDs, 36 Watts total -
12 Red, 12 Blue and 12 Green. This unit is convection cooled and provides up to 50,000 hours estimated LED
life. The DLED 36 Tri-Brick is rated at IP 20, designed for indoor applications only and is fully operational in any
mounting position. The unit can be operate from 90-240V and is ac linkable with IEC in/out connectors. Control
data input is via 3 pin or 5 pin DMX data first in and out connector cables. The DLED 36 Tri-Brick also features
low power consumption, minimal heat emission, no tri-color shadows and flicker-free operation for television
and film. The DLED 36 Tri-Brick includes a dual yoke mounting bracket for fixed installation or can be used as
a split bracket for floor standing and separated for mounting multiple units together in a line for linear strip
design. The unit also features an on board 4 button control menu with 4 digit LED display for setting control
address, modes, manual or auto programs. The unit comes fitted standard with a 25° lens kit which produces a
47° field angle effect. Optional wide and narrow lens kits are available.

FEATURES

• LED color changer
• 12 x “Tri-color” 3W LEDs, 36 Watts total - 12 Red, 12 Blue
and 12 Green
• 38.5º Beam Angle
• 2720 LUX @ 1 meter
• 350 LUX @ 3 meters
• Rated IP 20
• Compact Design (fits in 12” box truss)
• Convection cooled
• Electronic ballast, multi-voltage
• IEC Power in/out
• Built-in Power Supply and DMX 512 Control
• 4 Button Electronic Menu
• Master/ Slave auto program and music trigger
• 8 built-in programs with Speed control
• Control each L.E.D. independently

TECHNICAL SPECIFICATIONS

• DMX Channels:

3, 4, 12 or 15 channel operation modes

• Control:

USITT DMX-512, 3-pin and 5-Pin XLR serial input/output

• Dimmer:

Continuous dimming 0-100%

• Strobe:

Strobe effect (1-18 flashed per second)

• IP Rating:

IP20

• Power Supply:

Multi-voltage: 100-240V AC, 50/60Hz

On/Off Power switch

• Power Consumption:

Maximum 65W

• Fuse:

GMA 220v~2A, electronic ballast

• Lamp:

12 Tri-Color, 3 Watt SMDs /

36-Watt Total (12 x Red, 12 x Green 12 x Blue)

• Lamp life:

Long Life L.E.D. (rated at 50,000 Hours)

• Dimensions:

(LxWxH): 16.3” x 9” x 3.15” /

415 x 230 x 80mm

• Weight:

9.5 lbs. / 4.3 kgs.

• Rigging:

Mounting bracket and safety eye-hook

installed

Design LED 36 Tri-Brick Dimensions

6.6” (167.5mm) 8.95” (227.5mm)

3.14” (80mm)

12.69” (332.5mm)

14.27” (362.5mm)

16.31” (414.5mm)