Page 3 - TABLE OF CONTENS
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 2 www.ElationLighting.com TABLE OF CONTENS 1. General Information……………………………………………………………………… 3 a. Introduction………………………………………………………………………. 3 b. Unpacking………………………………………………………..…………..….. 3 c. Customer Support…………………………………………….………………… 3 d. Warr...
Page 4 - GENERAL INFORMATION; INTRODUCTION
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 3 www.ElationLighting.com 1. GENERAL INFORMATION INTRODUCTION : Congratulations, you have just purchased one of the most innovative and reliable LED fixtures on the market today! The Design LED 36 Pro™ has been designed to perform reliably fo...
Page 5 - yourself. Doing so will void your manufactures warranty.
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 4 www.ElationLighting.com yourself. Doing so will void your manufactures warranty. Please do not discard the shipping carton in the trash. Please recycle whenever possible. WARRANTY REGISTRATION : The Design LED 36 Pro™ carries a two year (73...
Page 6 - SAFETY INSTRUCTIONS; will void all manufactures warranty.
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 5 www.ElationLighting.com 2. SAFETY INSTRUCTIONS To guarantee proper and consistent operation, it is important to follow the guidelines in this manual. Elation Professional will not accept responsibility for damages resulting from the misuse ...
Page 7 - replace it immediately with a new one of similar power rating.
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 6 www.ElationLighting.com 11. Qualified personnel should perform all electrical connections. 12. Be sure the available voltage matches the voltage requirements of the unit. Be sure the power cord is never crimped or damaged. If the power cord...
Page 8 - rated
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 7 www.ElationLighting.com 3. FEATURES • Low power consumption • Minimal heat emission • Maintenance free operation • Equipped with 36 3-Watt (12 x red, 12 x green, 12 x blue) • Silent Operation, convection cooled, no fans • 100,000 hours rate...
Page 9 - GENERAL GUIDELINES; installation without a proper knowledge on how to do so.
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 8 www.ElationLighting.com 4. GENERAL GUIDELINES This fixture is a professional lighting effect designed for use on stage, in nightclubs, in theatres, and other types of architectural installations. Do not attempt operation or installation wit...
Page 10 - FIXTURE OVERVIEW; LED Lens Assembly –; The lens assembly may be user replaced in the event repair
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 9 www.ElationLighting.com 5. FIXTURE OVERVIEW 1. LED Lens Assembly – The lens assembly may be user replaced in the event repair is needed or a different beam angle is required.
Page 11 - Power Output Lead –; MOUNTING AND INSTALLATION
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 10 www.ElationLighting.com 2. LED Display – 4-segment menu display. Used to display the DMX address as well as all other menu functions. 3. Power Output Lead – This lead is used to jump power to another Design LED 36 Pro™. Please do not daisy...
Page 12 - minimum point load of 10 times the device’s weight.; qualified staff should attempt installation.; Mounting points; Be sure a qualified electrician performs all electrical; power cord to the appropriate wall outlet.
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 11 www.ElationLighting.com For added protection mount the fixtures in areas outside walking paths, seating areas, and away from areas were unauthorized personnel might reach the fixture. Before mounting the fixture to any surface, make sure t...
Page 13 - Mounting; Clamp Mounting
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 12 www.ElationLighting.com Mounting The Design LED 36 Pro™ is fully operational in any mounting position, hanging upside-down, side mounted, or set on a flat level surface, etc. Be sure this fixture is kept at least 0.5m (1.5 feet) away from ...
Page 14 - See illustrations below.; Securing the Design LED 36 ProTM; Always be sure to secure your fixture with a safety cable when
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 13 www.ElationLighting.com added safety measure be sure to attach at least one properly rated safety cable to the fixture. See illustrations below. Securing the Design LED 36 Pro™ Always be sure to secure your fixture with a safety cable when...
Page 15 - UNDERSTANDING DMX; address is set electronically using the controls on the LED menu.
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 14 www.ElationLighting.com 7. UNDERSTANDING DMX DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used by most lighting and controller manufactures as a form of communication between intelligent fixtures and controller...
Page 16 - DMX-512 connection with DMX terminator
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 15 www.ElationLighting.com DMX-512 connection with DMX terminator A DMX terminator should be used in all DMX lines especially in longer runs. The use of a terminator may avoid erratic behavior in your DMX line. A terminator is a 120 ohm 1/4 w...
Page 17 - show
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 16 www.ElationLighting.com correct fixture responds to the correct control signal. This digital starting address is the channel number from which the fixture starts to “listen” to the digital control information sent out from the DMX controll...
Page 18 - the functionality of the LED indicators.
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 17 www.ElationLighting.com 8. DISPLAY LED INDICATORS. The Design LED 36 Pro ™ has two LED indicators on the display. These indicators are designed to give a quick visual indication of the fixtures’ status. The illustration below details the f...
Page 19 - Default settings shaded.
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 18 www.ElationLighting.com 9. DISPLAY MENU Default settings shaded. ADDR AXXX ( 1 -512) Set the starting DMX address DISP ON/ OFF Display “Blackout” function. When activated the display will automatically blackout when not in use. FLIP ON/ OF...
Page 21 - DMX Operation Notes:; note that this will override all manual settings.; DMX CHANNEL TRAITS; all the green LEDs, and channels three controls all the blue LEDs.
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 20 www.ElationLighting.com 10. DMX TRAITS DMX Operation Notes: The fixture will function in DMX mode whenever the unit is receiving a DMX signal. Please note that this will override all manual settings. This unit will keep and retain the last...
Page 22 - the master dimming level.
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 21 www.ElationLighting.com DMX channel’s functions and their values (3-Channel Mode): Channel 1 - Red: 0-255 Red (0-Black, 255 - 100% Red) Channel 2 - Green: 0-255 Green (0-Black, 255 - 100% Green) Channel 3 - Blue: 0-255 Blue (0-Black, 255 -...
Page 23 - Channel 4 - Dimming / Program Speed Control; programs this channel will control the program speed.
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 22 www.ElationLighting.com DMX channel’s functions and their values (4-Channel Mode): Channel 1 - Red: 0-255 Red (0-Black, 255 - 100% Red) Channel 2 - Green: 0-255 Green (0-Black, 255 - 100% Green) Channel 3 - Blue: 0-255 Blue (0-Black, 255 -...
Page 25 - Channel 6 - General dimming / Program Speed Control; this channel will control master dimming.
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 24 www.ElationLighting.com Channel 6 - General dimming / Program Speed Control This channel has two functions depending on the operating mode. When running the built-in programs this channel will control the program speed, when not running th...
Page 26 - LENS REPLACEMENT; be changed out to achieve different beam angles.
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 25 www.ElationLighting.com 11. LENS REPLACEMENT The Design LED 36 Pro comes with a removable front cover that allows the lens assembly to be changed out to achieve different beam angles. The lens cover is held in place by four 5mm Allen screw...
Page 27 - CLEANING AND MAINTENANCE; sediments. Never remove the ground prong from the power cable.
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 26 www.ElationLighting.com 12. CLEANING AND MAINTENANCE Consider the following points during normal service and inspection: 1. Be sure all screws and fasteners are securely tightened at all times. Lose screws may fall out during normal operat...
Page 28 - -YEAR LIMITED WARRANTY
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 27 www.ElationLighting.com 13. 2-YEAR LIMITED WARRANTY A. Elation Professional ® hereby warrants, to the original purchaser, Elation Professional ® products to be free of manufacturing defects in material and workmanship for a period of two y...
Page 30 - PHOTOMETRIC DATA
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 29 www.ElationLighting.com 14. PHOTOMETRIC DATA
Page 33 - DIMENSIONAL DRAWINGS
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 32 www.ElationLighting.com 15. DIMENSIONAL DRAWINGS
Page 34 - CIRCUIT SCHEMATIC
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 33 www.ElationLighting.com 16. CIRCUIT SCHEMATIC
Page 35 - TECHNICAL SPECIFICATIONS; Power consumption:
DESIGN LED 36 Pro™ ©Elation Professional, Los Angeles Ca. 34 www.ElationLighting.com 17. TECHNICAL SPECIFICATIONS Power supply: 100v~240v / 50Hz~60Hz AC Power consumption: Maximum 150w LED Configuration: 36 x 3 Watt (12 x Red, 12 x Green 12 x Blue) Weight: 6 Kgs / 15.2Lbs DMX Channels: 6, 4, or 3 Ch...
Page 36 - Elation Professional
Rev. 5/13/2009 - visage Elation Professional 6122 S. Eastern Ave. Los Angeles, CA. 90040 323-582-3322 / 323-832-9142 fax www.ElationLighting.com / [email protected]