Page 2 - SAFETY SYMBOLS; WARNING
2 SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Pleaseread them carefully. WARNING Failure to abide by the information in a WARNING may result in seriousinjury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may resu...
Page 3 - ENGLISH; TABLE OF CONTENTS
TABLE OF CONTENTS 3 ENGLISH TABLE OF CONTENTS PRECAUTIONS .............................................................................. 4 1. INTRODUCTION ............................................................................ 9 1-1. Features .......................................................
Page 4 - PRECAUTIONS; ́ Do not dismantle the cabinet or modify the unit.
4 PRECAUTIONS PRECAUTIONS ´ If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately andcontact your dealer for advice.Attempting to use a malfunctioning unit can be dangerous. ´ Do not dismantle the cabinet or modify t...
Page 5 - OK
PRECAUTIONS 5 ENGLISH • Keep small objects or liquids away from the unit. Small objects accidentally falling through the ventilation slots into the cabinetor spillage into the cabinet may result in fire, electric shock, or equipmentdamage. If an object or liquid falls/spills into the cabinet, unplug...
Page 6 - ́ Use the correct voltage.; ́ Do not touch a damaged LCD panel directly with bare hands.
6 PRECAUTIONS ´ Use the correct voltage. * The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this User’s Manual may cause fire, electricshock, or other damage. * Do not overload your power circuit, as this may result in fire or electric shock....
Page 11 - Analog Input; Digital Input
2. CABLE CONNECTION 1 1 ENGLISH 2. CABLE CONNECTION 2-1. Before connecting Before connecting your monitor to the PC, change the display screen settings (resolutionand frequency) in accordance with the charts below. Analog Input • About Plug & Play of the monitor When your computer and display su...
Page 13 - • Use the enclosed power cord and connect to the standard; Turn on the monitor’s power and then switch on the PC’s power.
2. CABLE CONNECTION 1 3 ENGLISH 2. Plug the power cord into the power connector on the rear of themonitor and plug the other end of the power cord into a power outlet. • Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within therated voltage of...
Page 15 - Main menu Sub menu
3. ScreenManager 1 5 ENGLISH 3-2. ScreenManager Adjustments and Settings. The following table shows all the ScreenManager’s adjustment and setting menus.“*” indicates adjustments of analog input only and “**” indicates digital input only. Main menu Sub menu Reference Screen Clock* Phase*Position*Res...
Page 16 - Adjustment Lock; EIZO Logo Disappearing function
1 6 3. ScreenManager 3-3. Useful Functions Adjustment Lock Use the “Adjustment Lock” function to prevent any accidental changes. Locked function • Auto adjustment button adjustments and settings in the ScreenManager. Unlocked function • Adjustment of contrast and brightness by the control buttons. •...
Page 17 - Off Timer
3. ScreenManager 1 7 ENGLISH C P r o t i n o M D E L ) H 3 2 ~ H 1 ( d o i r e P n O n o i t a r e p O n e e r G " d o i r e p n O " n i . n i m 5 1 t s a L e c i t o N e c n a v d A 1 * g n i h s a l F n e e r G d e r i p x e " d o i r e p n O " e d o M " f f O r e w o P " y...
Page 19 - Use the “Clock”
4. ADJUSTMENT 1 9 ENGLISH 3. Adjust by using “Screen” menu in the ScreenManager.(1) Vertical bars appear on the screen. Æ Æ Æ Æ Æ Use the “Clock” p.35) adjustment Select the “Clock” and eliminate the vertical bars by using the right and left ofthe control buttons. Do not continuously press the contr...
Page 23 - To be clear-cut the letters or lines of the enlarged screen.; To set the brightness of the black area surrounding the image.
4. ADJUSTMENT 2 3 ENGLISH 2. To be clear-cut the letters or lines of the enlarged screen. Æ Æ Æ Æ Æ Switch the “Smoothing” setting. Select “Smoothing” in the screen menu and switch the setting to “Off” by using theleft button. • “Smoothing” is disabled in the following cases. * 1280 x 1024 of resolu...
Page 25 - To change the saturation.; Use the “Hue” adjustment.; Use the “Gain”
4. ADJUSTMENT 2 5 ENGLISH 2. To change the saturation. Æ Æ Æ Æ Æ Use the “Saturation” adjustment. The “Saturation” can be selected from -64 to 64. Setting the minimum level (-64)turns the image to the monochrome.To register the adjustment, select the “Save” icon and then push the enter button. • The...
Page 26 - Set the PC’s power saving settings.
2 6 4. ADJUSTMENT C P r o t i n o M D E L n O n o i t a r e p O n e e r G g n i v a s r e w o P g n i v a s r e w o P w o ll e Y e d o m f f O g n i v a s r e w o P 1 * w o ll e y g n i h s a l F ) h c a e r o f s e m i t 2 ( 4-4. Power-save Setup • Do your par t to conserve energy, turn off the mon...
Page 27 - ATTACHING AN ARM STAND; Setup Procedure
ENGLISH 5. ATTACHING AN ARM STAND 2 7 5. ATTACHING AN ARM STAND M4 x 16 mm 75 mm 75 mm Soft Cloth orCushion The L461 can be used with an arm stand by removing the tilt stand and attaching thearm stand to the terminal. ´ Use an arm stand that satisfies the followings.• When using the L461 with an arm...
Page 28 - ́ When attaching an arm stand, please refer to the user’s manual
2 8 5. ATTACHING AN ARM STAND 3. Attach an arm stand to the L461 securely. For the Por trait display, rotate the monitor clockwise and use the software for thepor trait. 4 Mounting Screws(enclosed): M4 x 16 (mm) Arm-stand ´ When attaching an arm stand, please refer to the user’s manual of the arm st...
Page 29 - Following messages; Problems
6. TROUBLESHOOTING 2 9 ENGLISH 6. TROUBLESHOOTING If a problem persists even after applying the suggested remedies, contact an EIZOdealer. No picture problems Æ See No.1 ~ No.2 Imaging problems Æ See No.3 ~ No.11 Other problems Æ See No.12 ~ No.16 1. No picture • Indicator status: Off • Indicator st...
Page 35 - Afterimage
9. GLOSSARY 3 5 ENGLISH 9. GLOSSARY Afterimage The Afterimage is particular to LCD monitors when the monitor screen is left on fora long period without use. The “Afterimage” can be removed gradually bychanging the displayed image. Clock With the analog input signal display, the analog signal is conv...
Page 38 - MEMO
Page 39 - APPENDIX
APPENDIX i APPENDIX APPENDIX / ANHANG / ANNEXE Preset Timing Chart for Analog inputTiming-Übersichten für Analog EingangSynchronisation des Signaux pour Analog numerique Based on the signal diagram shown below 21 factory presets have been registered inthe monitor's microprocessor.Der integrierte Mik...
Page 40 - i i
i i APPENDIX Mode Dot Clock Frequencies A: Front Porch B: Sync Period M H z H V H V H V k H z H z µs/ ms/ µs/ ms/ Dot Line Dot Line VGA 0.636/ 0.318/ 3.813/ 0.054/ 640 x 480 25.175 31.468 59.941 16 10 96 2 VGA 0.636/ 0.381/ 3.813/ 0.064/ 720 x 400 28.322 31.468 70.087 18 12 108 2 Macintosh 2.116/ 0....
Page 41 - iii
APPENDIX iii APPENDIX C: Back Porch D: Blanking Period E:Display Period F:Total Cycle H V H V H V H V µs/ ms/ µs/ ms/ µs/ ms/ µs/ ms/ Dot Line Dot Line Dot Line Dot Line 1.907/ 1.048/ 6.356/ 1.430/ 25.442/ 15.254/ 31.778/ 16.683/ 48 33 160 45 640 480 800 525 1.907/ 1.111/ 6.356/ 1.556/ 25.422/ 12.71...
Page 42 - i v
Page 45 - FCC Declaration of Conformity; We, the Responsible Party; Note; Canadian Notice
FCC Declaration of Conformity We, the Responsible Party EIZO NANAO TECHNOLOGIES INC.5710 Warland Drive, Cypress, CA 90630Phone: 562 431 5011 declare that the product Trade name: EIZOModel: FlexScan L461 is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to thefollow...
