Page 2 - Table of Contents
2 Table of Contents TRADEMARKS ● Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc. ● IBM, VGA, XGA, and PS/2 are trademarks or registered trademarks of International Business Machines, Inc. ● Windows and PowerPoint are registered trademarks of Microsoft C...
Page 3 - To the Owner; RISK OF ELECTRIC SHOCK; Safety Precaution; WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC; CAUTION
3 To the Owner CAUTION : T O R E D U C E T H E R I S K O F E L E C T R I CSHOCK, DO NOT REMOVE COVER (ORBACK). NO USER-SERVICEABLE PARTSINSIDE EXCEPT LAMP REPLACEMENT.R E F E R S E R V I C I N G T O Q U A L I F I E DSERVICE PERSONNEL. T H I S S Y M B O L I N D I C A T E S T H A T D A N G E R O U SVO...
Page 4 - Safety Instructions; Follow all warnings and instructions marked on the projector.; Voor de klanten in Nederland
4 Safety Instructions All the safety and operating instructions should be read beforethe product is operated. Read all of the instructions given here and retain them for lateruse. Unplug this projector from AC power supply beforecleaning. Do not use liquid or aerosol cleaners. Use a dampcloth for cl...
Page 5 - CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR; Moving the Projector; NO UPWARD; Air Circulation
5 Safety Instructions CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR ● Do not drop or bump the projector, otherwise damages or malfunctions may result. ● When carrying the projector, use a suitable carrying case. ● Do not transport the projector by using a courier or transport service in an unsui...
Page 6 - Compliance; AC Power Cord for the United States and Canada :; AC POWER CORD REQUIREMENT; Federal Communication Commission Notice; Model Number
6 Compliance The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC Power Cord for the United States and Canada : AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories(UL) and certified by the Canadian ...
Page 7 - Connecting the AC Power Cord; Projector side; NOTE ON THE POWER CORD; For Continental Europe
7 Compliance This projector uses nominal input voltages of 100-120 V or 200-240V A C . T h i s p r o j e c t o r a u t o m a t i c a l l y s e l e c t s t h e c o r r e c t i n p u tvoltage. It is designed to work with single-phase power systemshaving a grounded neutral conductor. To reduce risk of ...
Page 8 - Features and Design; Computers; RGB Scart signal can be connected.
8 Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. Thisprojector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD)technology. ◆ Compatibility T h e...
Page 9 - Part Names and Functions; Bottom; w e r t
9 Part Names and Functions Bottom Back Front q Power Cord Connector w Infrared Remote Receiver e Zoom Lever r Focus Ring t Projection Lens y Lens Cover (See page 54 for attaching.) u Air Intake Vent q w e r t q Exhaust Vent q w e r q Lamp Cover w Air Intake Vent (back and bottom) e Air Filter r Adju...
Page 10 - Director; Terminal
10 Part Names and Functions A built-in micro processor which controls this unit may occasionallymalfunction and need to be reset. This can be done by pressing theRESET button with a pen, which will shut down and restart the unit. Donot use the RESET function excessively. q COMPUTER IN 1 DVI-I Connec...
Page 11 - This projector has control buttons and indicators on its top.; Top; q w
11 Part Names and Functions ON - OFF POWER KEYSTONE INPUT WARNING LAMP REPLACE MENU V O L U M E – V O L U M E + SELECT This projector has control buttons and indicators on its top. Top q w e r t y u i o o LAMP REPLACE indicator Turns yellow when the life of the projection lamp draws to anend. (p43) ...
Page 12 - Remote Control
12 Part Names and Functions Remote Control q wer ty u i o !0!1 !4 !5 !6 !7 !8 !9 @0 !2!3 @1 @1 RESET/ON/ALL-OFF switch When using the remote control, set this switch to “ON.” Set it to “ALL OFF” forenergy saving when it is not used. Slide this switch to the "RESET" to initialize theremote co...
Page 13 - Pointer Function; II; These caution labels are put on the remote control.; Laser Pointer Function
13 Part Names and Functions You can move Spotlight or Pointer of the projector with the remote control to emphasize a part of the projected image.(See “Pointer” on page 40 for changing the patterns and sizes.) While pressing the MENU button, hold down the NO SHOWbutton for more than 7 seconds so tha...
Page 14 - Wireless Mouse Operation
14 Part Names and Functions This projector has eight different remote control codes (Code 1-Code 8); the factory-set, initial code (Code 1) and the otherseven codes (Code 2 to Code 8). This switching function prevents remote control interference when operating severalprojectors or video equipment at...
Page 15 - Remote Control Batteries Installation
15 Part Names and Functions To insure safe operation, please observe the following precautions : ● Use (2) AA, UM3 or R06 type alkaline batteries. ● Replace two batteries at the same time. ● Do not use a new battery with a used battery. ● Avoid contact with water or liquid. ● Do not expose the remot...
Page 16 - Installation; Positioning the Projector
16 Installation Projection angle can be adjusted up to 11.8 degrees with the adjustable feet. Lift the front of the projector and pull the feet lock latches onboth sides of the projector. 1 Release the feet lock latches to lock the adjustable feet androtate the adjustable feet to adjust the position...
Page 17 - Connecting to a Computer; Cables used for connection; External Audio Equipment; Terminals
17 Installation Connecting to a Computer ON ON COMPUTER IN 1 DVI - I MONITOR OUT S-VIDEO COMPUTER IN 2 / COMPONENT IN / COMPUTER / COMPONENT AUDIO IN AUDIO IN R VIDEO L USB SERVICE PORT RESET MCI (MONO) (VARIABLE) AUDIO OUT ON 1 DIP ON OFF 2 3 4 5 6 13" MODE (640 x 480) 16" MODE (832 x 624) ...
Page 18 - Connecting to Video Equipment; • Component-VGA Cable
18 Installation Connecting to Video Equipment COMPUTER IN 1 DVI - I MONITOR OUT S-VIDEO COMPUTER IN 2 / COMPONENT IN / COMPUTER / COMPONENT AUDIO IN AUDIO IN R VIDEO L USB SERVICE PORT RESET MCI (MONO) (VARIABLE) AUDIO OUT Video Source (example) Video Cassette Recorder Video Disc Player S-VIDEOCable...
Page 19 - Basic Operation; Turning On the Projector
19 Basic Operation Connect the projector's AC power cord into an AC outlet. ThePOWER indicator flashes red in a moment and turns on red. Press the POWER ON-OFF button on the top control or on theremote control. The POWER indicator turns green, and thecooling fans start to operate. The preparation di...
Page 20 - Keystone Adjustment; Rotate the Focus Ring to adjust the projected picture focus.; Move the Zoom Lever to zoom in and out.
20 Press the FREEZE button on the remote control to freeze the pictureon the screen. To cancel the FREEZE function, press the FREEZEbutton again or press any other button. If a projected picture has keystone distortion, correct the image with KEYSTONE adjustment. Basic Operation • The arrows are whi...
Page 21 - Direct Operation; Volume; Sound Menu; No Show Function; Menu Operation; black out
21 Basic Operation Press the NO SHOW button on the remote control to black out theimage. To restore to normal, press the NO SHOW button again orpress any other button. When a projected image is captured and setas “User” in the Logo item in the Setting Menu (p38), the screenchanges each time you pres...
Page 22 - Top Control
22 Basic Operation Press the MENU button to display the On-Screen Menu(Menu bar). A red frame is a pointer. Move the pointer (red frame) to the Menu icon that you wantto select by pressing the Point Left/Right button. Adjust the item data by pressing the Point Left/Right button.R e f e r t o t h e f...
Page 23 - Menu Bar; Used to adjust picture image.
23 Basic Operation Menu Bar PC System Menu Used to selectcomputer system.(p25) Image Adjust Menu Used to adjust computer image. [Contrast / Brightness / Color temp. / White balance (R/G/B) / Sharpness / Gamma] (p30) Setting Menu Used to changesettings of theprojector or reset lampreplace counter. (p...
Page 24 - Computer Input; RGB; Input Source Selection
24 Computer Input Choose either Computer 1 or Computer 2 by pressing the INPUTbutton on the top control or press the COMPUTER button on theremote control.Before using these buttons, correct input source should be selectedthrough menu operation as described below. Press the MENU button and the On-Scr...
Page 25 - Auto; PC System Menu; Computer System Selection
25 Computer Input This projector can detect most of the current computer systems with the Multi-scan system and the Auto PC adjustmentfunction provided in the projector. When selecting computer input, the projector automatically displays the most properimage for the input signal. One of the followin...
Page 26 - PC Adjust Menu; To store adjustment data
26 Computer Input Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform toyour computer. Auto PC Adjustment function can be operated as follows. Press the MENU button and the On-Screen Menu will appear.Press the Point Left/Right bu...
Page 28 - Select the resolution at the Display area dialog box.
28 Computer Input Select the resolution at the Display area dialog box. Display area Adjusts the horizontal area displayed by this projector. Press thePoint Left/Right button to decrease/increase value and then press theSELECT button. Display area H Adjusts the vertical area displayed by this projec...
Page 29 - Normal picture level preset on this projector.; Image Level Selection
29 Computer Input Press the MENU button and the On-Screen Menu will appear.Press the Point Left/Right button to move the red frame pointerto the Image Select Menu icon. 1 2 Press the Point Down button to move the red frame pointer tothe level that you want to set and then press the SELECTbutton. Mov...
Page 30 - Image Level Adjustment; Resets all adjustment to their previous levels.
30 Computer Input Press the Point Left/Right but-ton to adjust value. Press the MENU button and the On-Screen Menu will appear.Press the Point Left/Right button to move the red frame pointerto the Image Adjust Menu icon. 1 2 Press the Point Down button to move the red frame pointer tothe item that y...
Page 31 - Wide; Provides image to fit screen size.; Normal; button on the remote control.; Digital zoom –; Screen Size Adjustment
31 Computer Input This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the On-Screen Menu will appear.Press the Point Left/Right button to move the red frame pointerto the Screen Menu icon. When the Digital zoom + is se...
Page 32 - Video Input
32 Video Input Choose Video by pressing the INPUT button on the top control or theVIDEO button on the remote control.Before using these buttons, correct input source should be selectedthrough menu operation as described below. Press the MENU button and the On-Screen Menu will appear.Press the Point ...
Page 34 - Component; Video System Selection
34 Video Input AV System Menu (Video or S-Video) AV System Menu (Component) Press the MENU button and the On-Screen Menu will appear.Press the Point Left/Right button to move the red frame pointerto the AV System Menu icon. Press the Point Down button to move the red arrow pointer tothe system that ...
Page 36 - Interlace video signal can be displayed in a progressive picture.
36 Video Input Press the Point Left/Right but-ton to adjust value. Press the MENU button and the On-Screen Menu will appear.Press the Point Left/Right button to move the red frame pointerto the Image Adjust Menu icon. 1 2 Press the Point Down button to move the red frame pointer tothe item that you ...
Page 37 - Provides image at a wide screen ratio of 16 : 9.; Resets all adjustment to their previous figure.
37 Video Input This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the On-Screen Menu will appear.Press the Point Left/Right button to move the red frame pointerto the Screen Menu icon. Press the Point Down button and ...
Page 38 - Setting
38 Setting Keystone Press the MENU button and the On-Screen Menu will appear.Press the Point Left/Right button to move the red frame pointerto the Setting Menu icon. 1 2 Language The language used in the On-Screen Menu is available in English,G e r m a n , F r e n c h , I t a l i a n , S p a n i s h...
Page 40 - To change the code for the projector; Select a remote control code in this Setting Menu.; To change the code for the remote control; ···· locks operation of the top control. To unlock, use the
40 Setting This function is used to reset the lamp replace counter. Whenreplacing the projection lamp, reset the lamp replace counter byusing this function. See page 44 for operation. Lamp counter reset Remote control This projector provides eight different remote control codes (Code 1-Code 8); the ...
Page 41 - Maintenance and Cleaning; TOP CONTROL; Then check the items below.; Are the air filters clean? Clean the air filters periodically.; TOP CONTROL; The projector is shut down and the WARNING indicator lights red
41 Maintenance and Cleaning The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNINGindicator and the POWER indicator to take proper maintenance. WARNING LAMP REPLACE V O L U M E + LECT WARNINGflashing red TOP CONTROL Warning Indicator The pr...
Page 42 - Cleaning the Air Filters
42 Maintenance and Cleaning Disconnect the AC power cord before cleaning. When the projector is not in use, replace the lens cover. 1 3 2 Follow these steps to clean the projection lens. Air FilterPull up and remove. Turn off the projector, and disconnect the AC power cord fromthe AC outlet. Turn th...
Page 43 - ORDER REPLACEMENT LAMP; Reset the Lamp replace counter.; Lamp Replacement
43 Maintenance and Cleaning When the life of the projection lamp of this projector draws to an end,the LAMP REPLACE indicator lights yellow. If this indicator lightsyellow, replace the lamp with a new one promptly. Follow these steps to replace the lamp. Lamp Lamp Cover ORDER REPLACEMENT LAMP Replac...
Page 44 - LAMP HANDLING PRECAUTIONS; Lamp Replace Counter
44 Maintenance and Cleaning Be sure to reset the lamp replace counter after the lamp is replaced. When the lamp replace counter is reset, the LAMPREPLACE indicator stops lighting. Move the pointer to Lamp counter resetand then press the SELECT button. Themessage “Lamp replace counter Reset?” isdispl...
Page 45 - Appendix; Troubleshooting; and “Connecting to Video Equipment” on page17 and 18.
45 Appendix Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. – Make sure you have properly connected the projector to peripheral equipment as described in "Connecting to a Computer" and “Connecting to Video Equipment” on page17 an...
Page 46 - The Remote Control
46 This symbol on the nameplate means the product is Listed by Underwriters LaboratoriesInc. It is designed and manufactured to meet rigid U.L. safety standards against risk offire, casualty and electrical hazards. Appendix WARNING :High voltages are used to operate this projector. Do not attempt to...
Page 47 - Projector Condition; Indicators; Indicators and Projector Condition
47 Appendix Check the indicators for projector condition. • • • lights green. • • • lights red. • • • off • • • flashes green. ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lightsyellow, replace the projection lamp with a new on...
Page 48 - Menu Tree
48 Appendix Menu Tree System (1) MODE 1 MODE 2 SVGA 1 - - - - Auto PC Adj. Fine sync. Total dots Horizontal Vertical Current mode Clamp Display area Display area - H Display area - V Full screen Reset Mode free Store Quit Standard Real Image 1 Image 2 Image 3 Image 4 Image Adjust Contrast Brightness...
Page 50 - Compatible Computer Specifications; RESOLUTION; RESOLUTION; MAC; RESOLUTION; RESOLUTION
50 Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 140MHz of Dot Clock. When an input signal is digital from DVI terminal, refer to the chart below. ON-SCREEN DISPLAY RESOLUTION H-Freq...
Page 51 - Technical Specifications
51 Appendix 0.8" TFT Active Matrix type, 3 panels Multimedia Projector 6.2 lbs (2.8 kg) 11.73" x 2.8" x 8.58" (298mm x 71mm x 218mm) (not including raised portions) 1,024 x 768 dots 2,359,296 (1,024 x 768 x 3 panels) PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N H-sync. 15 ~ 100 KHz, ...
Page 52 - Pin Configuration; Configurations of Terminals
52 Appendix COMPUTER INPUT/COMPONENT INPUT/MONITOR OUTPUT TERMINAL (ANALOG) Terminal : HDB15-PIN 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V Power Horiz. sync. Ground (Vert.sync.) DDC ...
Page 53 - Optional Parts
53 Terminal : Mini DIN 8-PIN 1 2 3 4 5 8 7 6 Pin Configuration SERVICE PORT CONNECTOR ----- CLK DATA GND ----- ----- GND ----- R X D ----- ----- GND RTS / CTS T X D GND GND ----- ADB ----- GND ----- ----- ----- GND PS/2 Serial ADB 1 2 3 4 5 6 7 8 Vcc - Data + Data Ground 1 2 3 4 USB CONNECTOR (Serie...
Page 54 - Attaching the Lens Cover
54 Appendix Attaching the Lens Cover When moving this projector or when it is not used for an extendedperiod, replace the lens cover. Secure the string for the lens cover through a hole of thelens cover. 1 2 Turn the projector upside down and secure the string forlens cover to a hole on the bottom o...
Page 56 - Printed in Japan; A-key to better communications
Part No. 610 308 9058 (1AA6P1P4178-- MY3B) Printed in Japan © 2003 Eiki International, Inc. A-key to better communications U.S.A. EIKI International, Inc.30251 EsperanzaRancho Santa MargaritaCA 92688-2132U.S.A.Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878E-Mail : [email protected] C...
