Page 3 - Contents
Contents About owner’s manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety Instructions . . . . . . . . . . . . . ....
Page 4 - Basic Operation
Contents Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Turning on the projector ...................................................................... Adjusting the screen image .................................................
Page 6 - WARNING
Safety Instructions(continued) WARNING If a problem should occur If smoke or strange odors arise, continued use could result in fire or electrical shock. In such case, immediately turn off the power switch and then disconnect the power plug from the power outlet. After making sure that the smoke or ...
Page 8 - CAUTION
Safety Instructions(continued) CAUTION Placing heavy objects on top of this projector could result in loss of balance or falling and cause personal injury or damage the projector. Do not block the ventilation openings. Do not block the ventilation openings of this projector. Blocking ventilation cou...
Page 9 - projector in a humid or dusty location. This could result in fire or; This could result in electrical shock.; When disconnecting the power plug, do not pull on the power cord.; Always grip the plug when disconnecting.; When the projector is not to be used for an extended period.; If the projector is not to be used for a n extended period because of; Compliance
Safety Instructions(continued) CAUTION Avoid installation in humid or dusty locations. Do not install this projector in a humid or dusty location. This could result in fire or electrical shock. Do not handle the power cord roughly. Keep the power cord away from heaters; The heat could melt the power...
Page 10 - Location of product safety labels; LENS WARRANTY LABEL; LAMP WARNING LABEL
Location of product safety labels Safety labels are used on or within the projector to alert you to items or areas requiring your attention. LENS WARRANTY LABEL EMI LABEL EIKI Model:LC-XIP2000 Input: 100-240V, 50/60Hz, 4A(1.2A~2.8A) Serial no.: LAMP WARNING LABEL 9 Business card
Page 11 - Checking the Package Contents
Checking the Package Contents Projector Remote Control with batteries Video Cable Power Cord S-Video Cable Audio Cable Computer cable Speaker Cable USB Cable(1.5M) Filter 10 Accessory Bag Pen Pointer Batteries Hanging String
Page 12 - Quick Start Guide
Checking the Package Contents Quick Start Guide / Owner’s Manual CD Carry Bag (Optional) RS232 Cable (Optional) Extension USB Cable(5M,Optional) Adapter (Optional) 11
Page 13 - IR sensor; Zoom Ring
Part Names and Function: Main Unit IR sensor 3 1 Zoom ring 2 Focus ring Speaker CMOS sensor 4 Filter cover( bottom) 1 Zoom Ring U s e t h e Z o o m R i n g t o a d j u s t t h e s i z e o f t h e p r o j e c t e d i m a g e .R o t a t e t h e Z o o m R i n g u n t i l t h e i m a g e i s t h e d e s...
Page 14 - Main Unit; Control panel; Front adjustable foot; E x t e n d a n d r e t r a c t t o a d j u s t t h e p r o j e c t i o n a n g l e; Foot adjust button; L o c k / u n l o c k t h e a d j u s t a b l e f o o t .; Lens cover; O p e r a t i n g s y s t e m .
Part Names and Function:(continued) Main Unit 8 Control panel 7 Lens cover Foot adjust button 6 5 Front adjustable foot 5 Front adjustable foot E x t e n d a n d r e t r a c t t o a d j u s t t h e p r o j e c t i o n a n g l e 6 Foot adjust button L o c k / u n l o c k t h e a d j u s t a b l e f o...
Page 16 - Display or hides the OSD main menu page.
Part Names and Function:(continued) Control panel 8. Power indicator 1. Power 9. Lamp indicator POWER LAMP 6. Menu-left/right, Menu-up/down 4. Auto A 5. Menu KEYSTONE 2. Input 7. Keystone INPUT BLANK 3. Blank 5. Menu Display or hides the OSD main menu page. 6.Menu-up /down, Menu-right / left Selecti...
Page 17 - Inlet ventilation; Input Analog RGB video signal from a computer; Monitor out connector; Component video signal from a video source.
Part Names and Function:(continued) Rear View / IO Board 12. Rear IR receiver Inlet ventilation 10. Power socket 11. Power switch 5. S-video 9. USB mouse connector4. RS-232C 3. Monitor out 1. Computer in 1 2. Computer in 2 / YPbPr 7. Audio out 8. Audio in 6. Video in 1. Computer in 1 Input Analog RG...
Page 18 - Connecting to an external speaker system.; USB mouse connector; Connects a USB cable to a computer for interactive
Part Names and Function:(continued) Rear View / IO Board 12. Rear IR receiver Inlet ventilation 10. Power socket 11. Power switch 5. S-video 9. USB mouse connector4. RS-232C 3. Monitor out 1. Computer in 1 2. Computer in 2 / YPbPr 7. Audio out 8. Audio in 6. Video in 7. Audio out Connecting to an ex...
Page 19 - Bottom View; Air filter cover; Prevents dust and other foreign particles from being drawn into
Part Names and Function:(continued) Bottom View Air filter cover Suspension bracket fixing points(4) 1. Suspension bracket fixing points (4 points) Install the optional ceiling mount here when suspending the projector from the ceiling. 2. Air filter cover Prevents dust and other foreign particles fr...
Page 21 - Remote Control Batteries Installation; C A U T I O N
Part Names and Function:(continued) Remote Control Batteries Installation 1. Remove the battery cover. 2. Loading the batteries. Make sure the plus and minus poles are correctly oriented. 3. Close the battery cover. C A U T I O N 1. Avoid excessive heat and humidity. 2. Do not drop the remote contro...
Page 24 - Size and Projection Distance; The distance between the projector and screen determines the
Installation(contiuned) Size and Projection Distance The distance between the projector and screen determines the actual image size. Refer to the table below to determine the image size at a given distance. A:B Ratio=6.5:1 A B 23 Screen Size (inches) (WxH) mm 5 0” 6 0 ” 1 0 1 6 x 7 6 2 1 2 1 9 x 9 1...
Page 25 - Adjusting the Image Position; tune the image position.
Installation(contiuned) Adjusting the Image Position Use the adjustable foot at the front of the projector to set the image height. Rotate the adjustable foot at the rear of the projector to fine- tune the image position. When the foot is adjusted, it may cause the shape of the projected image to be...
Page 26 - Moving the projector; moving the projector to prevent damage to the projector.; carry bag; ( O p t i o n a l , p l e a s e c o n t a c t y o u r d e a l e r f o r m o r e i n f o r m a t i o n )
Installation(contiuned) Moving the projector 1. Use the carry bag when moving the projector.(option) 2. Replace the lens cover and retract the front adjustable foot when moving the projector to prevent damage to the projector. carry bag ( O p t i o n a l , p l e a s e c o n t a c t y o u r d e a l e...
Page 32 - Step 8: Continue Anyway; the correct operation of your system.
Installation(contiuned) Software and Hardware install 2.Section two : Software and Hardware driver installation Step 8: Continue Anyway 31 NOTE: We confirmed that installation of this software will not impair or destabilize the correct operation of your system.
Page 34 - Remove the lens cover.
Installation(contiuned) Software and Hardware install 2.Section two : Software and Hardware driver installation Step 10-A: Turning on the projector POWER Remove the lens cover. Connect the projector’s power cable with the projector, and insert the power cable into a wall socket. Turn on the AC power...
Page 35 - If no image are projected, change the input signal.; When using a laptop or a PC with an in built monitor, select external
Installation(contiuned) Software and Hardware install 2.Section two : Software and Hardware driver installation Step 10-B: Turning on the projector WARNING If no image are projected, change the input signal. POWER LAMP A KEYSTONE INPUT BLANK When using a laptop or a PC with an in built monitor, sele...
Page 36 - Step 11: Connecting PC to the projector
Installation(contiuned) Software and Hardware install 2.Section two : Software and Hardware driver installation Step 11: Connecting PC to the projector To connect Computer cable (RGB) first then USB cable. Computer in 1 or Computer in 2 USB cable Computer cable To Computer monitor port 35 Mouse port...
Page 39 - Software and Hardware install; Step14: Continue Anyway; “LightPen” shortcut will be added on the window
NOTE: We confirmed that installation of this software will not impair or destabilize the correct operation of your system. Installation(contiuned) Software and Hardware install 2.Section two : Software and Hardware driver installation Step14: Continue Anyway Step15: Finish “LightPen” shortcut will b...
Page 40 - Section three: Functional key of “Pointer”; Button
Installation(contiuned) 3.Section three: Functional key of “Pointer” Button ： Mouse left key 39 LED lamp
Page 44 - Point to left or right of screen outside then push the button
Installation(contiuned) 4.Section four: Calibration There is another quick way to change the position of icon orhide it. Point to left or right of screen outside then push the button of “Pointer”. 43
Page 45 - P u s h t h e b u t t o n o f “ P o i n t e r ” t o s e l e c t i c o n ’ s position
Installation(contiuned) 5.Section five: Function of icon Icon position P u s h t h e b u t t o n o f “ P o i n t e r ” t o s e l e c t i c o n ’ s position on either the right-side or left-side of screen. Mouse Pen Eraser Select the fineness of pen Select the color of pen Erase all Save files Redraw...
Page 46 - How to Connect; other end of the terminal where the monitor cable is disconnected; VGA; Desktop PC
How to Connect Desktop PC Before starting, make sure that the projector and computers are both turned off. 1. Connect the computer cable. Connect either end of the computer cable to the projector’s Computer in 1 or Computer in 2 Disconnect the monitor cable from the computer and connect the other en...
Page 47 - Connect the other end of the project cable to the monitor out; Laptop PC
How to Connect Laptop PC Before beginning, make sure that the projector and computers are both turned off. 1. Connect the computer cable. Connect either end of the computer cable to the projector’s Computer in 1. Connect the other end of the project cable to the monitor out connection on the laptop....
Page 48 - Connect RCA plug at projector and video source ( like DVD
How to Connect Video 1. Connect to a video source The Projector can receive composite AV ,YPbPr and S-Video. Connect RCA plug at projector and video source ( like DVD player) for video signal. Please contact with your dealer for optional cable. 2. Connect RCA plug ( white and red) to audio source ( ...
Page 49 - Connect YPbPr plug at projector computer in 2 port and video
How to Connect Video 3. Connect YPbPr plug at projector computer in 2 port and video source ( like DVD player) for video signal. 4. For S-Video, using S-Video cable connect to projector and video source for video signal. 48
Page 51 - The power indicator will flash green.
Basic Operation Turning on the Projector - Procedure 6. The power indicator will flash green. 7. Pr e s s the Inpu t button on th e c on t r o l p a n e l o r on th e remote control to select the appropriate source. 8. Rotate the zoom ring to adjust the screen size. 9. Rotate the focus ring to adjus...
Page 52 - Do not set th e power switch to off or unplug the
Basic Operation Turning off the Projector - Procedure 1. Press the power button on the projector or remote control. The power off confirmation message appears . 2. Press the power button again and the projector will enter cool-down mode. The lamp shuts off, the lamp indicator flashes red, and the fa...
Page 53 - Rotate the Zoom Ring to adjust the image.; Adjusting the image height; Press the Keystone button on the control panel.
Basic Operation Adjust the Screen Image 1. Adjusting the image size Rotate the Zoom Ring to adjust the image. 2. Adjusting the image height Extend or retract the front adjustable foot to adjust the height of the image. 3. Correcting Ke ystone Distortion ◆ Press the Keystone button on the control pan...
Page 55 - Computer Mode-Picture Menu
1. PICTURE Brightness 000/100 Adjusts the overall image brightness Contrast 000/100 Adjusts the difference between light and dark areas of the image Sharpness 000/002 Adjusts the image sharpness Display mode Select Video Presentation Natural Green board User Keep the soft tender color For computer p...
Page 56 - Computer Mode-Audio Menu
2. AUDIO Volume 000/040 Adjusts the volume Mute Off/on Mutes the volume on/off Functions of Menu (OSD) Computer Mode-Audio Menu 55
Page 57 - Computer Mode-SETTING Menu
3.SETTING H position 000/100 Move the image position horizontally V position 000/100 Move the image position vertically Phase 000/100 Set the synchronization polarity Frequency 000/100 Set the horizontal scanning frequency Auto keystone off/on Automatically Corrects keystone distortion in image i.e....
Page 58 - Computer Mode-ADVANCED Menu
Functions of Menu (OSD) Computer Mode-ADVANCED Menu 57
Page 60 - Computer Mode-PRESENTATION Menu
5.PRESENTATION Auto ceiling off/on Automatically inverts the image when the projector is turned upside down i.e. when the projector is mounted on the ceiling Front execute Normal projection mode Ceiling execute Inverts the image vertically, used when the projector is mounted upside down Rear execute...
Page 61 - Reset Lamp Timer
Functions of Menu (OSD) Reset Lamp Timer 1. After you select 〔 Reset Lamp Timer 〕 on the OSD menu, the following confirmation message will appear on the screen. 2.You choose 〔 Yes 〕 ,the Lamp Mode show 〔 0 〕 . * The replacement warning message is set to appear after about 2000 hours of lamp use in o...
Page 62 - Video Mode-Picture Menu
1. PICTURE Brightness 000/100 Adjusts the overall image brightness Contrast 000/100 Adjusts the difference between light and dark areas of the image Sharpness 000/002 Adjusts the image sharpness Display mode Select Video Presentation Natural Green board User Keep the soft tender color For computer p...
Page 63 - Video Mode-Audio Menu
2. AUDIO Volume 000/040 Adjusts the volume Mute Off/on Mutes the volume on/off Functions of Menu (OSD) Video Mode-Audio Menu 62
Page 64 - Video Mode-Setting Menu
3.SETTING Auto keystone off/on Automatically Corrects keystone distortion in image i.e. press once to do once Keystone V -80/+80 Corrects vertical keystone distortion in image Auto search off/on Search signal source automatically. Functions of Menu (OSD) Video Mode-Setting Menu 63
Page 65 - Video Mode-Advanced Menu
Functions of Menu (OSD) Video Mode-Advanced Menu 64
Page 67 - Video Mode-PRESENTATION Menu
5.PRESENTATION Auto ceiling off/on Automatically inverts the image when the projector is turned upside down i.e. when the projector is mounted on the ceiling Front execute Normal projection mode Ceiling execute Inverts the image vertically, used when the projector is mounted upside down Rear execute...
Page 68 - Appendix; Technical Specifications; II
67 Appendix Technical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 12.20” x 3.78” x.10.63” (310 mm x 96 mm x 270 mm) (excluding adjustable feet) Net Weight 7.7 lbs (3.5 kg) Feet Adjustment 0° to 14° Panel Resolution LCD Panel System 0.63” TFT Acti...
Page 69 - suspending the from a ceiling.
Maintenance and Troubleshooting Ceiling Mounted Installation Guide Attach the optional ceiling mount at four-suspension bracket fixing points when suspending the from a ceiling. A special method of in stallation is required in order to suspend theprojector from the ceiling. Please ask you r dealer f...
Page 70 - case; cleaner approved for use on optical coatings.
Maintenance and Troubleshooting 1.Cleaning the projector Clean the projector cabinet by wiping it gently with a soft cloth.If necessary, the cabinet can be cleaned using a neutral detergent and a soft cloth ensure th case WARNING Always unplug the projector before performing anymaintenance. 2.Cleani...
Page 76 - List of Support Displays Modes; XGA; List of Supported Monitor Displays; Computer mode; Signal Refresh
List of Support Displays Modes XGA 75 List of Supported Monitor Displays Computer mode Signal Refresh Rate(Hz) Resolution(dots) VGA 60 640X480 VESA 60/72/75/85 640X480 SVGA 56/60/72/75/85 800X600 60/70/75/85 1024X768 SXGA 70/75 1152X864 SXGA 60/75 1280X960 SXGA 60 1280X1024 MAC 67 640x480 MAC 75 832...
