Page 2 - SAFETY PRECAUTIONS; RAIN OR
SAFETY PRECAUTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The projector has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into the power outlet. Do not try to defeat this safety feature, Int...
Page 3 - IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp ...
Page 4 - TABLE OF CONTENTS; PAGE
TABLE OF CONTENTS PAGE INTRODUCTION 5 COMPATIBILITY 5 IMAGE RESOLUTION 5 UNPACKING THE PROJECTOR 5 TRADEMARKS 5 POWER REQUIREMENT 5 DESCRIPTION 6 SETTlNG-UP THE PROJECTOR 7-8 POSITIONING 7 ROOM LIGHT 7 LEVELING AND ELEVATING ADJUSTMENTS 7 VENTILATION 8 MOVING THE PROJECTOR 8 CONNECTING THE PROJECTOR...
Page 5 - INTRODUCTION; COMPATABILITY; IMAGE RESOLUTION; TRADEMARKS; POWER REQUIREMENTS
INTRODUCTION The multimedia projector that combines powerful and sophisticated features with easy-to-use, intuitive controls. Built- in multimedia features include audio, a palette of 16.77 million colors and active matrix liquid crystal display (LCD) technology. The projector is ideal for high-perf...
Page 6 - DESCRIPTION
Page 7 - SETTING-UP THE PROJECTOR; projector can be focused from 3.6’; HAZARD
SETTING-UP THE PROJECTOR POSITIONING; • This projector is basically designed to project on a flat projection surface. • This projector can be focused from 3.6’ (1.1 m) 73.2’ (22.3m). • Refer to the figure below as an example when positioning the projector to the screen. THIS PROJECTOR SHOULD BE SET ...
Page 8 - VENTILATION; MOVING THE PROJECTOR; Use the carry handle when moving the projector.; Replace the lens cover and rotate the leveling/elevation feet; CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
VENTILATION Although this projector has a cooling fan to protect from overheating, please be careful to set the projector so that it can cool properly and you can avoid a risk of fire and malfunction. •Do not cover the vents with papers or other materials. •Keep the rear grill at least 3.3’ (1 m) aw...
Page 9 - CONNECTING THE PROJECTOR; CONNECTING THE COMPUTER; WARNING; Compatible computer; CONNECTING TO THE MONITOR OUTPUT TERMINAL {HDB15-PIN
CONNECTING THE PROJECTOR CONNECTING THE COMPUTER CONNECT NC TO THE COMPU ER. PUT 1 JACKS (BNC TYPE x 5 ) Personal computers can be connected to the computer input (Red, Green, Blue, Horiz. Sync. and Vert. Sync.) on the projector. • Connect the computer to these jacks using the BNC cables (not provid...
Page 10 - CONNECTING TO THE COMPUTER AUDIO MONITOR OUTPUT (VARIABLE) JACKS; CONNECTING TO THE USB PORT CONNECTORS (1 and 2)
CONNECTING TO THE COMPUTER AUDIO MONITOR OUTPUT (VARIABLE) JACKS These jacks will contain the audio information of the selected program source being viewed on the screen (Computer 1 or Computer 2). If you have selected program source Computer 2 the audio signal connected to the Computer 2 audio inpu...
Page 11 - CAUTION
CAUTION The hook up should be done as per the above illustration. After hook up~ turn on the projector, monitor, computer, in that order.
Page 12 - The hook up should be done as per the above
CAUTION The hook up should be done as per the above illustration. After hook up, turn on the projector, monitor, computer, in that order.
Page 15 - CONNECTING THE VIDEO EQUIPMENT; CONNECTING TO THE VIDEO INPUT JACKS (1 and 2) BNC TYPE x 3; CONNECTING TO THE AUDIO INPUT JACKS (1 and 2); CONNECTING TO THE VIDEO MONITOR OUTPUT JACKS (BNC TYPE x 3); CONNECTING TO THE AUDIO MONITOR OUTPUT (VARIABLE) JACKS
CONNECTING THE VIDEO EQUIPMENT CONNECTING TO THE VIDEO INPUT JACKS (1 and 2) BNC TYPE x 3 Connect to the video outputs of a VCR, video disc player, DVD player, video camera, satellite TV tuner or other AV equipment. Connect video output from AV equipment to these jacks using the BNC cables. The vide...
Page 17 - OPERATION OF CONTROLS
Page 19 - COMPUTER AUDIO MONITOR OUTPUT; WIRED REMOTE JACK
16 COMPUTER INPUT-i JACKS (BNC TYPE x 5) Used to connect a computer to the projector. 22 CONTROL PORT-1 CONNECTOR Used to connect a mouse cable to the projector. 17 COMPUTER INPUT-2 TERMINAL (VGA HDB15) Used to connect a computer to the projector. 23 CONTROL PORT-2 CONNECTOR Used to connect a mouse ...
Page 20 - SIDE OF THE PROJECTOR (CONNECT THE VIDEO EQUIPMENT); VIDEO MONITOR OUTPUT JACKS (BNC TYPE x 3)
SIDE OF THE PROJECTOR (CONNECT THE VIDEO EQUIPMENT) 28 VIDEO INPUT JACKS-1 (BNC TYPE x 3) Used to connect a video source to the projector. 33 AUDIO INPUT JACKS-2 (R and L) Used to connect an audio source to the projector 29 S-VIDEO INPUT JACK-1 Used to connect a S-VHS video source to the projector. ...
Page 23 - front and rear of the projector.
REMOTE CONTROL BATTERY INSTALLATION USING THE REMOTE CONTROL UNIT Point the remote control toward the projector (Receiver widow) whenever pressing the buttons. Maximum operating range for the remote control is about 16.4’ (5 m) and 60 0 front and rear of the projector. To insure safe operation, plea...
Page 25 - REMOTE CONTROL; BATTERY INSTALLATION; USING THE REMOTE CONTROL UNIT (wireless); To insure safe operation, please observe the following
REMOTE CONTROL BATTERY INSTALLATION The remote control unit can be used as wireless or wired remote control. USING THE REMOTE CONTROL UNIT (wireless) Point the remote control toward the projector (Receiver window) whenever pressing the buttons. Maximum operating range for the remote control is about...
Page 26 - CONTROL THE PROJECTOR
CONTROL THE PROJECTOR The projector has two types of operation: DIRECT OPERATION and MENU OPERATION. DIRECT OPERATION allows you to operate the projector by using one button without showing the MENU. In MENU OPERATION mode, you display menus where you can adjust the projector’s settings. Follow the ...
Page 27 - MENU OPERATION
MENU OPERATION ADJUST ITEM TOP CONTROL OF THE PROJECTOR WIRELESS/WIRED REMOTE CONTROL WIRELESS REMOTE CONTROL MODE SELECT MENU POINT LEFT/RIGHT SELECT POINT UP/DOWN SELECT MENU POINT LEFT/RIGHT SELECT POINT UP/DOWN SELECT MENU POINT (LEFT/RIGHT) SELECT (REAR CLICK) POINT (UP/DOWN) SELECT (REAR CLICK...
Page 29 - USING THE PROJECTOR; TO TURN ON THE PROJECTOR
USING THE PROJECTOR TO TURN ON THE PROJECTOR Connect the projector to a video source (Computer, VCR, Video Camera, Video Disc Player, etc.) using the appropriate terminals on the side of the projector (See “CONNECTING THE PROJECTOR” section on pages 9-16). Connect the projector’s AC power cord into ...
Page 31 - MODE SELECT
MENU OPERATION In MENU OPERATION mode, you can adjust the projector. You can use the TOP CONTROL OF THE PROJECTC or the REMOTE CONTROL UNIT. MODE SELECT You can select a mode used in the MENU among computer 1, computer 2, video 1 and video 2. 1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog...
Page 32 - SOUND ADJUSTMENT; LANGUAGE ADJUSTMENT
SOUND ADJUSTMENT You can adjust the sound volume, treble, bass levels and Built-in SP., Sound Mute ON/OFF switch in the MENU display. 1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear. 2. Press the POINT LEFT/RIGHT BUTTON(s) to select SOUND and press the SELECT (REAR CLICK) B...
Page 33 - MENU EXIT; However, if the video; press
MENU EXIT To close the MENU display, press the POINT RIGHT BUTTON to select right end ICON and then press the SELECT (REAR CLICK) BUTTON. NOTE: Press the MENU BUTTON during the appearing of the MENU display on the screen, the MENU display is disappeared. COLOR SYSTEM SELECT (VIDEO MODE) This project...
Page 35 - press the
PICTURE IMAGE ADJUSTMENT (VIDEO MODE) Picture adjustments have been preset at the factory. If you want to change the setting, operate the projector as follows. 1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear. 2. Press the POINT LEFT/RIGHT BUTTON(s) to select IMAGE and press...
Page 37 - PC ADJUSTMENT
COMPUTER SYSTEM SELECT (COMPUTER MODE) This projector is designed to accept different types of computer display signals based on VGA, SVGA, XGA or SXGA (See “COMPATIBLE COMPUTER SPECIFICATIONS” on the next page). If you set MODE SELECT to “COMPUTER”, the projector will automatically process the inco...
Page 38 - COMPATIBLE COMPUTER
Specifications are subject to change without notice. NOTE: Basically this projector can accept the signal from all computers with the above mentioned V, H-Frequency and less than 135 MHz of Dot Clock. COMPATIBLE COMPUTER
Page 39 - AUTO IMAGE FUNCTION (COMPUTER; The Auto image function can automatically adjust; adjustments
AUTO IMAGE FUNCTION (COMPUTER MODE) The Auto image function can automatically adjust the Fine sync., Total dots and Screen position for most computers. 1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear. 2. Press the POINT LEFT/RIGHT BUTTON(s) to select AUTO IMAGE and press th...
Page 40 - PICTURE IMAGE ADJUSTMENT (COMPUTER MODE)
PICTURE IMAGE ADJUSTMENT (COMPUTER MODE) Picture adjustments have been preset at the factory. If you want to change the setting, operate the projector as follows. 1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear. 2. Press the POINT LEFT/RIGHT BUTTON(s) to select IMAGE and pr...
Page 41 - PICTURE POSITION ADJUSTMENT (COMPUTER MODE)
PICTURE POSITION ADJUSTMENT (COMPUTER MODE) 1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear. 2. Press the POINT LEFT/RIGHT BUTTON(s) to select POSITION and press the SELECT (REAR CLICK) BUTTON. Another dialog box POSITION SETTING DISPLAY will appear. 3. Press the POINT DOWN...
Page 43 - To decrease the; changed
6. Another dialog box “PC ADJUSTMENT DISPLAY 1” will appear and the parameter data for the Mode you have selected is shown in this dialog box. 7. The parameters will be filled with the data determined by the projector according to the present signal input. 8. The function of the parameters and their...
Page 44 - ITEM; WIDTH
17. Another dialog box “PC ADJUSTMENT DISPLAY 2” will appear and the parameter data for the Mode you have selected is shown in this dialog box. 18. Move the arrow to an adjusting item you want to adjust by pressing the POINT UP/DOWN BUTTON(s). 19. To increase the level, point the arrow to A and then...
Page 45 - MODE FREE
MODE FREE The Mode free function is designed to delete the parameter data produced by PC ADJUST. 1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear. 2. Press the POINT LEFT/RIGHT BUTTON(s) to select PC ADJUST and press the SELECT (REAR CLICK) BUTTON. Another dialog box “ Where...
Page 46 - PICTURE SCREEN ADJUSTMENT (COMPUTER MODE)
PICTURE SCREEN ADJUSTMENT (COMPUTER MODE) This projector has a picture screen resize function, which enables you to project the image different size. 1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear. 2. Press the POINT LEFT/RIGHT BUTTON(s) to select SCREEN and press the SELE...
Page 47 - OTHER FUNCTION SETTING; BLUE BACK
OTHER FUNCTION SETTING This projector has other function settings; Blue back, Display, Reverse T/B, Reverse R/L, Split wipe and Lamp age. BLUE BACK When this function is in the “On” position, the projector will project a blue image without video noise on the screen when the video source is unplugged...
Page 48 - AND SPLIT WIPE
BLUE BACK, DISPLAY, REVERSE T/B, REVERSE L/R AND SPLIT WIPE 1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear. 2. Press the POINT LEFT/RIGHT BUTTON(s) to select SETTING and press the SELECT (REAR CLICK) BUTTON. Another dialog box SETTING DISPLAY will appear. 3. Press the POIN...
Page 49 - LAMP AGE
LAMP AGE NOTE: Do not reset the LAMP REPLACEMENT MONITOR TIMER, except after the lamp is replaced. 1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear. 2. Press the POINT LEFT/RIGHT BUTTON(s) to select SETTING and press the SELECT (REAR CLICK) BUTTON. Another dialog box SETTING...
Page 50 - AIR FILTER CARE AND CLEANING; RECOMMENDATION; TO ENJOY PICTURE IMAGE, USE THE PROJECTOR IN; TEMPERATURE WARNING INDICATOR
AIR FILTER CARE AND CLEANING The removable air filter prevents dust from accumulating on the surface of the projection lens and projection mirror. Should the air filter become clogged with dust particles, it will reduce the cooling fan’s effectiveness and may result in internal heat build up and red...
Page 51 - LAMP REPLACEMENT; •For continued safety, replace with a lamp assembly of the same type.; Connect the detachable AC cord to the projector.; NOTE ON THE LAMP REPLACE INDICATOR
LAMP REPLACEMENT If the lamp fails to come on and the lamp monitor on the projector light is orange, you must replace the bulb. •For continued safety, replace with a lamp assembly of the same type. •Allow the projector to cool for at least 45 minutes before you open the lamp cover, The inside of the...
Page 52 - CLEANING THE LENS; Follow these steps to clean the projection lens:; TROUBLESHOOTING; Problem; • Make
CLEANING THE LENS Follow these steps to clean the projection lens: 1. Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch the lens. 2. Lightly wipe the cleaning cloth ov...
Page 53 - LJR
Problem: Try these Solutions: Picture is T/B inverted. Check Reverse T/B feature. (See “OTHER FUNCTION SETTING” section on pages 47—48). Picture is LJR Reversed. Check Reverse L/R feature. (See “OTHER FUNCTION SETTING” section on pages 47—48). Some displays are not seen during the operation. Check D...
Page 54 - TECHNICAL SPECIFICATIONS; Multi-media Projector
TECHNICAL SPECIFICATIONS Projector Type Multi-media Projector Dimensions (W x H x D) 15.4” (390 mm) x 9.2” (234 mm) x 22.9” (582 mm) Net Weight 38.2 lbs (17.3 kg) LCD Panel System 1.8” TFT Active Matrix type (Thin Film Transistor) x 3 Number of Pixels 2,359,296 {786,432 (1,024 x 768) x 3} Color Syst...
