Page 2 - RISK OF ELECTRIC SHOCK; Safety Precaution; CAUTION; CAUTION ON HANGING FROM THE CEILING; TO THE OWNER
2 CAUTION : T O R E D U C E T H E R I S K O F E L E C T R I CSHOCK, DO NOT REMOVE COVER (ORBACK). NO USER-SERVICEABLE PARTSINSIDE EXCEPT LAMP REPLACEMENT.R E F E R S E R V I C I N G T O Q U A L I F I E DSERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUSVOLTAGE CONSTITUTING A RISK OF ELECTRICSHO...
Page 3 - SAFETY INSTRUCTIONS; Voor de klanten in Nederland
3 SAFETY INSTRUCTIONS All the safety and operating instructions should be read beforethe product is operated. Read all of the instructions given here and retain them for lateruse. Unplug this projector from AC power supply beforecleaning. Do not use liquid or aerosol cleaners. Use a dampcloth for cl...
Page 4 - COMPLIANCES; AC Power Cord for the United States and Canada :; AC POWER CORD REQUIREMENT; Federal Communication Commission Notice
4 COMPLIANCES The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC Power Cord for the United States and Canada : AC Power Cord used in the United States and Canada is listed by the UnderwritersLaboratories (UL) and certified by the Canadian...
Page 5 - TABLE OF CONTENTS
5 TABLE OF CONTENTS FEATURES AND DESIGN 6 BEFORE OPERATION 16 COMPUTER INPUT 25 VIDEO INPUT 34 SETTING 39 APPENDIX 43 PREPARATION 7 NAME OF EACH PART OF PROJECTOR 7 SETTING-UP PROJECTOR 8 CONNECTING AC POWER CORD 8 LENS INSTALLATION 9 POSITIONING PROJECTOR 9 LENS SHIFT ADJUSTMENT 9 PICTURE LEVEL AND...
Page 6 - FEATURES AND DESIGN
6 FEATURES AND DESIGN This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. Thisprojector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD)technology. ◆ Compatibility T h i s p...
Page 7 - PREPARATION; NAME OF EACH PART OF PROJECTOR; BOTTOM; FRONT
7 PREPARATION NAME OF EACH PART OF PROJECTOR BOTTOM BACK HOT AIR EXHAUSTED ! Air blown from exhaust vent is hot. Whenusing or installing a projector, followingprecautions should be taken. ● Do not put a flammable object near this vent. ● Keep rear grills at least 3.3’ (1m) away fromany object, espec...
Page 8 - For Continental Europe
8 PREPARATION SETTING-UP PROJECTOR This projector uses nominal input voltages of 100-120 Vor 200-240 V AC. This projector automatically selectscorrect input voltage. It is designed to work with single-p h a s e p o w e r s y s t e m s h a v i n g a g r o u n d e d n e u t r a lconductor. To reduce r...
Page 9 - MOVED UP OR DOWN; ROOM LIGHT; Do not cover vents with papers or other materials.; VENTILATION; SCREEN
9 PREPARATION POSITIONING PROJECTOR Before setting up a projector, install Projection Lens on Projector. 1. Before installation, check where a projector is used and prepare suitable lens. For specifications of a Projection Lens, refer to manual separately attached or contact sales dealer where you p...
Page 10 - CAUTION IN CARRYING OR TRANSPORTING A PROJECTOR; PICTURE LEVEL AND TILT ADJUSTMENT
10 PREPARATION CAUTION IN CARRYING OR TRANSPORTING A PROJECTOR ● Do not drop or bump a projector, otherwise damages or malfunctions may result. ● When carrying a projector, use a suitable carrying case. ● Do not transport a projector by using a courier or transport service in an unsuitable transport...
Page 11 - CONNECTING PROJECTOR; TERMINALS OF PROJECTOR; REPLACEMENT OF TERMINAL; NOTE When replacement of terminal board, MAIN
11 CONNECTING PROJECTOR TERMINALS OF PROJECTOR This projector applies various input/output terminals and 3 terminal slots for expansion to tune to diversity of signals fromcomputers and video equipment. 3-built-in Terminal Slots enable you to arrange desired combinations of input sources justby chan...
Page 12 - CONTROL PORT CONNECTORS
12 CONNECTING PROJECTOR R/Pr G/Y B/Pb H/HV V CONTROL PORT DVI INPUT 1 R/C JACK USB RESET (MONO) (MONO) (MONO) (MONO) AUDIO CONTROL PORT S-VIDEO VIDEO/Y C INPUT 2 INPUT 3 AUDIO AUDIO SERIAL PORT IN SERIAL PORT OUT AUDIO OUT R L R L R R L L W h e n c o n t r o l l i n g c o m p u t e rw i t h R e m o ...
Page 14 - CONNECTING TO COMPUTER; Cables used for connection
14 CONNECTING PROJECTOR R/Pr G/Y B/Pb H/HV V CONTROL PORT DVI INPUT 1 R/C JACK USB RESET (MONO) (MONO) (MONO) (MONO) AUDIO CONTROL PORT S-VIDEO VIDEO/Y C INPUT 2 INPUT 3 AUDIO AUDIO SERIAL PORT IN SERIAL PORT OUT AUDIO OUT R L R L R R L L CONNECTING TO COMPUTER DVI-VGA Cable Monitor Output Desktop t...
Page 15 - CONNECTING TO VIDEO EQUIPMENT
15 CONNECTING PROJECTOR CONNECTING TO VIDEO EQUIPMENT R/Pr G/Y B/Pb H/HV V CONTROL PORT DVI INPUT 1 R/C JACK USB RESET (MONO) (MONO) (MONO) (MONO) AUDIO CONTROL PORT S-VIDEO VIDEO/Y C INPUT 2 INPUT 3 AUDIO AUDIO SERIAL PORT IN SERIAL PORT OUT AUDIO OUT R L R L R R L L Video Source (example) Video Ca...
Page 16 - BEFORE OPERATION; TOP CONTROLS AND INDICATORS
16 ON -- OFF MENU INPUT SELECT LENSSHIFT VOLUME IMAGE FOCUS AUTOPC ADJ. ZOOM LAMP REPLACE WARNING TEMP. READY LAMP Used to open or closeMENU operation. (P19,20) MENU BUTTON IMAGE BUTTON READY INDICATOR SELECT BUTTON POWER ON–OFF BUTTON INPUT BUTTONS WARNING TEMP. INDICATOR LAMP INDICATOR POINT BUTTO...
Page 17 - OPERATION OF REMOTE CONTROL; Left Side; LASER POINTER FUNCTION
17 BEFORE OPERATION FOCUS BUTTON Used to adjust focus. (P22) AUTO PC ADJ. BUTTON Use to operate AUTO PCAdjustment function. (P28) KEYSTONE BUTTON Used to correct keystonedistortion. (P22, 39) IMAGE BUTTON U s e d t o s e l e c t i m a g elevel. (P31, 36) LOCK FREEZE SELECT D.ZOOM MUTE VOLUME- MENU N...
Page 18 - Operating Range; REMOTE CONTROL BATTERIES INSTALLATION
18 BEFORE OPERATION Operating Range P o i n t R e m o t e C o n t r o l U n i t t o w a r dprojector (Infrared Receiver Window)w h e n e v e r p r e s s i n g a n y b u t t o n .M a x i m u m o p e r a t i n g r a n g e f o rRemote Control Unit is about 16.4’(5m) and 60° in front and rear of aprojec...
Page 19 - OPERATING ON-SCREEN MENU
19 BEFORE OPERATION HOW TO OPERATE ON-SCREEN MENU FLOW OF ON-SCREEN MENU OPERATION Display ON-SCREEN MENU Press MENU button to display ON-SCREEN MENU (MENUBAR). A red frame is POINTER. Move POINTER (red frame) to MENU ICON that you want toselect by pressing POINT RIGHT / LEFT buttons. A d j u s t I ...
Page 21 - BASIC OPERATION; TURNING ON PROJECTOR; TURNING ON / OFF PROJECTOR
21 BASIC OPERATION TURNING ON PROJECTOR TURNING OFF PROJECTOR TURNING ON / OFF PROJECTOR Power off? Message disappears after 4 seconds. Connect a projector's AC Power Cord into a wall outlet and turnMAIN ON / OFF SWITCH to ON. LAMP indicator lights RED,and READY indicator lights GREEN. Press POWER O...
Page 22 - KEYSTONE ADJUSTMENT; ADJUSTING SCREEN; Zoom; ZOOM ADJUSTMENT
22 KEYSTONE ADJUSTMENT 1 Press KEYSTONE button on Remote Control Unit or selectKeystone on SETTING menu. (Refer to page 39.) Keystonedialog box appears. 2 Correct keystone distortion by pressing POINT LEFT/RIGHTbutton(s). Press POINT LEFT button to reduce left part ofimage, and press POINT RIGHT but...
Page 23 - No show
23 Press FREEZE button on Remote Control Unit to freeze picture on-screen. To cancel FREEZE function, press FREEZEbutton again or press any other button except POINT / SELECT / RIGHT CLICK / LASER button. PICTURE FREEZE FUNCTION Press NO SHOW button on Remote Control Unit to black out a image.To res...
Page 24 - SOUND ADJUSTMENT; DIRECT OPERATION
24 BASIC OPERATION 1 2 Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT buttons to move a red frame pointer toSOUND Menu icon. Volume Press VOLUME (+/–) button(s) on Top Control or on Remote ControlUnit to adjust volume. Volume dialog box appears on screen for a fewseconds.(+)...
Page 25 - COMPUTER INPUT; SELECTING COMPUTER SYSTEM; WHEN SELECT INPUT 1 (DVI INPUT TERMINAL ); Digital; SELECTING INPUT SOURCE; MENU OPERATION; Select INPUT source by pressing INPUT
25 COMPUTER INPUT Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button to move a red frame pointer toINPUT Menu icon. Move a pointer to "RGB", and then press SELECT button. 1 3 When connect a computer output [5 BNC Type (Red, Green, Blue,Horiz. Sync and Vert. Sync.)...
Page 26 - Auto; SELECT COMPUTER SYSTEM MANUALLY; AUTOMATIC MULTI-SCAN SYSTEM
26 COMPUTER INPUT This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, SXGA, WXGA or UXGA(refer to “COMPATIBLE COMPUTER SPECIFICATIONS” on page 27). When selecting Computer, this projectorautomatically tunes to incoming signal and projects proper image wit...
Page 27 - MAC
27 COMPUTER INPUT COMPATIBLE COMPUTER SPECIFICATIONS Basically this projector can accept a signal from all computers with V, H-Frequency mentioned below and lessthan 230 MHz of Dot Clock. –––––––– (Interlace) 1024 x 768 (Interlace) ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x ...
Page 28 - PC ADJUSTMENT; AUTO PC ADJUSTMENT; NOTE
28 COMPUTER INPUT PC ADJUSTMENT AUTO PC ADJUSTMENT Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to yourcomputer. Auto PC Adjustment function can be operated as follows. Press MENU button and ON-SCREEN MENU will appear. PressPOI...
Page 31 - PICTURE IMAGE ADJUSTMENT
31 COMPUTER INPUT PICTURE IMAGE ADJUSTMENT IMAGE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button to move a red frame pointer toIMAGE SELECT Menu icon. 1 2 Press POINT DOWN button to move a red frame pointer to levelthat you want to set and then pres...
Page 32 - IMAGE LEVEL ADJUSTMENT
32 COMPUTER INPUT Press POINT LEFT/RIGHT buttonsto adjust value. Reset all adjustment to previous figure. Reset Store Closes IMAGE MENU. Quit Other icons operates as follows. Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT buttons to move a red frame pointer toIMAGE ADJUST Me...
Page 33 - PICTURE SCREEN ADJUSTMENT
33 COMPUTER INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display desirable image size. Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button(s) to move a red frame pointer toSCREEN Menu icon. When Digital zoom + is...
Page 34 - Video; VIDEO INPUT
34 SELECTING INPUT SOURCE Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button to move a red frame pointer toINPUT Menu icon. Press POINT DOWN button to move a red arrow pointer to Input2 and then press SELECT button. Source Select Menu willappear. 1 2 M o v e a p o i n t e...
Page 35 - SELECTING VIDEO SYSTEM; VIDEO JACK OR S-VIDEO JACK
35 VIDEO INPUT AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) SELECTING VIDEO SYSTEM Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT buttons to move a red frame pointer to AVSYSTEM Menu icon. Press POINT DOWN button to move a red arrow pointer tosystem tha...
Page 39 - SETTING; Optional Control Number
39 SETTING Ceiling W h e n t h i s f u n c t i o n i s “ O n , ” p i c t u r e i s t o p / b o t t o m a n d l e f t / r i g h treversed. This function is used to project image from a ceilingmounted projector. Rear When this function is “On,” picture is left/right reversed. This functionis used to p...
Page 40 - Time left until Lamp off.
40 SETTING On start When this function is “On,” projector is automatically turned on justby switching MAIN ON/OFF SWITCH on. Note ; B e s u r e t o t u r n p r o j e c t o r o f f p r o p e r l y ( r e f e r t o s e c t i o n “TURNING OFF PROJECTOR” on P21). If projector is turnedo f f i n w r o n g...
Page 41 - To change the code of Projector
41 SETTING Remote control This projector has eight different remote control codes; the factory-set normal code (Code 1) and the other seven codes (Code 2 toCode 8). This switching function prevents remote control operationmixture (jam) when operating several projectors or video equipmenttogether. Fo...
Page 43 - MAINTENANCE; WARNING TEMP. INDICATOR; OPERATING WIRELESS MOUSE; INSTALLATION; MOUSE POINTER; RIGHT CLICK button; APPENDIX
43 MAINTENANCE WARNING TEMP. INDICATOR WARNING TEMP. Indicator flashes red and projector is automatically turned off when an internal temperature of a projectorexceeds normal temperature. Wait at least 5 minutes before turning on projector again. When WARNING TEMP. Indicator continues to flash, chec...
Page 44 - CLEANING PROJECTION LENS; Follow these steps to clean projection lens:; SIDE OF PROJECTOR; BOTTOM OF PROJECTOR
44 APPENDIX AIR FILTER CARE AND CLEANING Turn power off, and disconnect AC power cord froman AC outlet. 1 2 Air Filter prevents dust from accumulating on a surface of Projection Lens and Projection Mirror. Should AirFilter become clogged with dust particles, it will reduce Cooling Fans' effectivenes...
Page 45 - Lamp Status Display; Lamp Replace Indicator; Lamp Mode Changeover
45 APPENDIX LAMP MANAGEMENT This Projector is equipped with 2 Projection Lamps to ensure brighter image and those lamps are controlled by LampManagement Function. Lamp Management Function detects status of two lamps and shows status on screen or on LAMPREPLACE indicator. This function also automatic...
Page 46 - NOTES ON LAMP REPLACEMENT; LAMP REPLACEMENT
46 APPENDIX C h e c k n u m b e r o f l a m p t o b e r e p l a c e d o n L a m p S t a t u sDisplay. Loosen 3 screws on Lamp Cover and remove Lamp Cover.(See right figure.) 1 3 Loosen 2 screws and pull out Lamp Assembly to be replacedby grasping handle. 4 Turn off a projector and disconnect AC Powe...
Page 47 - LAMP HANDLING PRECAUTIONS; ORDER REPLACEMENT LAMP
47 APPENDIX This projector uses a high-pressure lamp which must be handled carefully and properly. Improperhandling may result in accidents, injury, or create a fire hazard. ● Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is noguarantee of the same lifetim...
Page 48 - TROUBLESHOOTING; Try these Solutions
48 APPENDIX ● Check audio cable connection from audio input source. ● Adjust audio source. ● Press VOLUME (+) button. ● Press MUTE button. TROUBLESHOOTING Before calling your dealer or service center for assistance, check matters below once again. 1. Make sure you have connected a projector to your ...
Page 49 - SERVICE
49 APPENDIX ● Check cable connection between a projector and your computer. ● Check mouse setting on your computer. ● Turn a projector on before turning on a computer. SERVICE WARNING: High voltages are used to operate this projector. Do not attempt to open cabinet. You can often correct operating p...
Page 50 - Projector Condition; Indicators
50 APPENDIX INDICATORS AND PROJECTOR CONDITION Check the Indicators for projector condition. • • • on • • • dim • • • off • • • flashing ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow,replace the projection lamp wit...
Page 51 - Computer Input; MENU TREE
51 APPENDIX System (1) SVGA 1 SVGA 2 SVGA 3 Auto PC Adj. Fine sync. Total dots Horizontal Vertical Current mode Clamp Display area Display area - H Display area - V Full screen Reset Mode free Store Quit Standard Real Image 1 Image 2 Image 3 Image 4 Image Adjust Contrast Brightness Color Temp Red Gr...
Page 52 - Video Input
52 APPENDIX Auto PAL SECAM NTSC NTSC 4.43 PAL-M PAL-N Video Input Auto 1080i50 1035i 720p 575p 480p 575i 480i Standard Cinema Image 1 Image 2 Image 3 Image 4 Quit Full Zoom 0 - 63 0 - 63 0 - 63 0 - 63 Off/On Volume Treble 0 - 63 Language Image Select System (3) System (2) Image Adjust Contrast Brigh...
Page 53 - TECHNICAL SPECIFICATIONS
53 Owner’s Manual (Print and CD-ROM)AC Power CordWireless/Wired Remote Control Transmitter and BatteriesRemote Control CableDVI-VGA Cable and DVI Cable3 Types Control Cable (For PS/2, Serial and ADB port) 3 Types Light-Block Sheet (For option lens)2 Types Lens Attachment (For option lens)Protective ...
Page 54 - USB PORT TERMINAL; CONFIGURATIONS OF TERMINALS; SERIAL PORT IN/OUT TERMINAL; CONTROL PORT CONNECTOR
54 APPENDIX Vcc - Data + Data Ground 1 2 3 4 USB PORT TERMINAL Pin Configuration Connect USB port output terminal of computer or peripheral equipment to this terminal with USB port Cable (notsupplied). 2 3 4 1 CONFIGURATIONS OF TERMINALS Terminal : Mini DIN 8-PIN Connect control port (PS/2, Serial o...
Page 56 - Printed in Japan; A-key to better communications
© 2006 Eiki International, Inc. U.S.A. EIKI International, Inc.30251 EsperanzaRancho Santa MargaritaCA 92688-2132U.S.A.Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878E-Mail : [email protected] Canada Deutschland & Österreich EIKI Deutschland GmbHAm Frauwald 12 65510 IdsteinDeutsch...
Page 57 - LCD PROJECTOR; LENS REPLACEMENT AND INSTALLATION PROCEDURES; NOTES ON LENS INSTALLATION; Be sure to install the lens following this procedure precisely.; AVAILABLE LENS; Type; LIGHT-BLOCK SHEET MOUNTING SCREWS 2 pcs.
- 1 - E LCD PROJECTOR LENS REPLACEMENT AND INSTALLATION PROCEDURES CAUTION When installing or replacing the Projection Lens, refer to this manual. For installation ofthe lens, use the parts designated in the manual. Do not use the installation manual andLight-Block Sheets in the lens package.Check t...
Page 58 - LENS REPLACEMENT AND INSTALLATION PROCEDURE
- 2 - E NOTE: The installation procedure and neededparts for lens installation depend on the type ofthe Projection Lens. Check the Model No. ofthe Projection Lens and be sure to install orreplace the lens following the procedure below. 1 Remove the Lower Lens Cover. Remove the two (2) Screws A . Pus...
Page 59 - LENS ATTACHMENT
- 3 - E LENS LOCK RELEASE LENS LOCK SCREW DRIVER IN THE LENS LOCATE MOTORON RIGHT SIDE LENS ATTACHMENT Part No. (610 275 6029) Fig-4 Fig-6 Fig-7 LENS LOCKLEVER LENS LOCK 4 Replace the Lens Cap on the rear (mounting side) of the Projection Lens and mount a lens on the Lens Attachment with four (4) Sc...
Page 60 - For Models
- 4 - E 6 This projector has three Light-Block Sheets. Use the Light-Block Sheet corresponding with the lens. (Refer to the list below.) Set the Light-Block Sheet through the lens. Make sure the shape of the Light-Block Sheets are correct and be sure to set them as shown in the Fig. 8. NOTE: ● Be su...
Page 63 - Correcting the focus; Screen
- 7 - E BE SURE TO CHECK FOR SAFETY After installing or replacing the lens, be sure to check the following for safety. 1. Check if the lens is securely fixed with the screws. 2. Check if no wiring is damaged or tangled on the gear of the lens motor or the other mechanical parts. 3. Check if no part ...
Page 64 - SPECIFICA
- 8 - E NOTE: Following table shows approximate measurement. Actual measurement depends on lens and projectors. SPECIFICA TIONS (Throw distance, screen size, and distance of lens shift. ) LENS SHIFT (UP/DOWN) H2 H1 H2 H1 Upper max Down max Model No. LNS-S02 LNS-S02Z Zoom 30" 60" 80" 100&...
