Page 2 - • This projector should be set in the way indicated. If not, it may; READ AND KEEP THIS OWNER’S MANUAL FOR LATER USE.
TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable ...
Page 3 - SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for ...
Page 4 - COMPLIANCES; AC POWER CORD REQUIREMENT; Federal; Communication Commission Notice; AC Power Cord for the United States and Canada:
COMPLIANCES AC POWER CORD REQUIREMENT The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIOPMENT AND EASILY ACCESSIBLE . Federal Communication Commission Notice This equipment has been tested...
Page 5 - TABLE OF CONTENTS
TABLE OF CONTENTS FEATURES AND DESIGN 6 PREPARATION 7 NAME OF EACH PART OF PROJECTOR 7 SETTING-UP PROJECTOR 8 CONNECTING AC POW ER CORD 8 POSITIONING PROJECTOR 9 ADJUSTABLE FEET 10 MOVING PROJECTOR 10 CONNECTING PROJECTOR 11 TERMINALS OF PROJECTOR 11 CONNECTING TO VIDEO EQUIPMENT 12 CONNECTING TO CO...
Page 6 - • Computers; FEATURES AND DESIGN
• Compatibility This projector widely accepts various video and computer input signals including; • 6 Color Systems NTSC, PAL, SECAM, NTSC 4.43, PAL-M or PAL- N color system can be connected. • Component Video Component video signals, such as a DVD player output high definition TV signals including ...
Page 8 - PREPARATION; CONNECTING AC POWER CORD
PREPARATION This projector uses nominal input voltages of 100-120 V or 200-240 V AC. The projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any...
Page 9 - POSITIONING THE PROJECTOR; RECOMMENDATION; NOTE
POSITIONING THE PROJECTOR This projector is designed to project on a flat projection surface and it can be focused from 4.43’ (1 .35m) 45.9’ (14.Om). Refer to the figure below to adjust the screen size. RECOMMENDATION Brightness in the room has a great influence on picture quality. It is recommended...
Page 10 - ADJUSTABLE FEET; MOVING PROJECTOR; CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
ADJUSTABLE FEET Picture tilt and projection angle can be adjusted by rotating Adjustable Feet. Projection angle can be adjusted to 9.0 degrees. 1 Lift the front of projector and pull Feet Lock Latches on both sides of projector. 2 Release Feet Lock Latches to lock Adjustable Feet and rotate Adjustab...
Page 12 - Cables used for connection
Cables used for connection (* = Cables are not supplied with this projector.) • Video Cable (RCA x 1) • Video Cable (RCA x 3)*, (BNC x 1 )*, (BNC x 2)* or (BNC x 3)* • S-VIDEO Cable • Audio Cable (RCA x 2) Speaker Cable (Mini x 1 (stereo)) *
Page 15 - TOP CONTROL
Page 16 - OPERATING RANGE
Remote Control Unit can be used as either Wired or Wireless. Point Remote Control toward projector (Remote Receiver) whenever pressing the buttons. Maximum operating range for Remote Control is about 16.4’ (Sm) and 60° in front and rear of projector. OPERATING RANGE
Page 17 - REMOTE CONTROL BATTERIES INSTALLATION
WIRED REMOTE CONTROL OPERATIONS When using this Remote Control Unit as Wired Remote Control, Connect Remote Control Unit to R/C JACK with Remote Control Cable (supplied). Batteries installation is required when using as Wired Remote Control Unit. REMOTE CONTROL BATTERIES INSTALLATION 1. Remove the b...
Page 19 - MENU BAR
Page 20 - TURNING OFF THE PROJECTOR; TURNING ON PROJECTOR
1 Complete the peripheral connections (with Computer, VCR, etc.) before turning on projector. (Refer to “CONNECTING TO PROJECTOR” on Pages 11~-13 for connecting that equipment.) 2 Connect the projector’s AC Power Cord into an AC outlet and turn MAIN ON I OFF SWITCH to ON. LAMP Indicator lights RED, ...
Page 21 - FOCUS ADJUSTMENT
1 Press ZOOM A/V button(s) on Top Control or on Remote Control Unit. The message “Zoom” is displayed. 2 Press ZOOM A button or POINT UP button to make image larger, and press ZOOM V button or POINT DOWN button to make image smaller. FOCUS ADJUSTMENT 1 Press FOCUS A/V button(s) on Top Control or on R...
Page 22 - MUTE SETTING
NO SHOW FUNCTION Press NO SHOW button on Remote Control Unit to black out the image. To restore to normal, press NO SHOW button again or press any other button. PICTURE FREEZE FUNCTION Press FREEZE button on Remote Control Unit to freeze the picture on-screen. To cancel FREEZE function, press FREEZE...
Page 23 - MENU OPERATION; DIRECT OPERATION
Choose either Input 1 or Input 2 by pressing INPUT button on Top Control or on Remote Control Unit. MENU OPERATION Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to INPUT Menu icon. 2 Press POINT DOWN button to move a red arrow pointer to ...
Page 24 - AUTO PC ADJUSTMENT
SELECT COMPUTER SYSTEM MANUALLY This projector automatically selects PC system among those provided in this projector and PC system can be also selected manually. 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to SYSTEM icon. 2 Press PO...
Page 25 - MANUAL PC ADJUSTMENT
MANUAL PC ADJUSTMENT This projector can automatically tune to the display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from the standard ones and may not be tuned by Multi- Scan system of this projector. If this...
Page 27 - COMPATIBLE COMPUTER SPECIFICATIONS
COMPATIBLE COMPUTER SPECIFICATIONS Basically this projector can accept the signal from all computers with the V, H-Frequency mentioned below and less than 180 MHz of Dot Clock. NOTE : Specifications are subject to change without notice. NOTE: Specifications are subject to change without notice.
Page 29 - IMAGE LEVEL ADJUSTMENT
IMAGE LEVEL ADJUSTMENT Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to IMAGE ADJUST Menu icon. 2 Press POINT DOWN button to move a red frame pointer to the item that you want to adjust. and then press SELECT button. The level of each it...
Page 33 - VIDEO MODE
Select image level among Standard, Cinema, Image 1, Image 2, Image 3 and Image 4 by pressing IMAGE button on the Remote Control Unit. Normal picture level preset on this projector. This normal picture level can also be selected by pressing NORMAL button. Picture level adjusted for the picture with f...
Page 37 - To change the code of Projector:; To change the code of the Remote Control:
This function turns Projection Lamp off when projector detects signal interruption and projector is not used for a certain period in order to reduce power consumption and maintain the Lamp-life. (This projector is shipped with this function ON.) Power Management function operates to turn Projection ...
Page 38 - AIR FILTER CARE AND CLEANING; CAUTION; CLEANING THE PROJECTION LENS; Follow these steps to clean the projection lens:; WARNING TEMP INDICATOR
WARNING TEMP. Indicator flashes red when internal temperature of projector exceeds normal temperature. The Indicator stops flashing when temperature of projector returns to normal. When WARNING TEMP. Indicator continues to flash, check the items listed below. 1 Ventilation slots of projector may be ...
Page 39 - LAMP REPLACEMENT; LAMP REPLACE COUNTER
LAMP REPLACEMENT When the life of the Lamp of this projector draws to an end, the LAMP REPLACEMENT Indicator lights yellow. When the image becomes dark or the color of the image becomes unnatural, replacement of the Lamp is required. CAUTION • For continued safety, replace with a lamp assembly of th...
Page 40 - and
Before calling your dealer or service center for assistance, check the matters below once again. 1. Make sure you have connected projector to your equipment as described in the section “CONNECTING THE PROJECTOR” on pages 11 13. 2. Check cable connection . Verify that all computer, video and power co...
Page 43 - CONFIGURATIONS OF TERMINALS; RGB TERMINAL
CONFIGURATIONS OF TERMINALS RGB TERMINAL Terminal HDB1 5-PIN Connect the display output terminal of computer to this terminal with VGA Cable (not supplied). When connecting the Macintosh computer, the MAC Adapter (not supplied) is required. SERIAL TERMINAL Terminal HDB9-PIN Connect the serial port o...
Page 44 - EIKI DEUTSCHLAND GMBH
Audio Visual/Video Products EIKI INTERNATIONAL, INC. 26794 Vista Terrace Drive, Lake Forest, CA. 92630-8113, U.S.A. TEL (949) 457-0200 FAX (949) 457-7878 EIKI CANADA 310 First Street, Unit 2 P.O. Box 156 Midland Ontario L4R 4K8 Canada TEL (705) 527-4084 FAX (705) 527-4087 EIKI DEUTSCHLAND GMBH AM Fr...
