Page 2 - TO RAIN OR MOISTURE.
LC-SM1 2 TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a cons...
Page 3 - SAFETY INSTRUCTIONS
LC-SM1 3 SAFETY INSTRUCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp c...
Page 4 - COMPLIANCES; AC POWER CORD REQUIREMENT
LC-SM1 4 COMPLIANCES AC POWER CORD REQUIREMENT The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. Federal Communication Commission Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursua...
Page 5 - TABLE OF CONTENTS
LC-SM1 5 TABLE OF CONTENTS FEATURES AND DESIGN 6 PREPARATION 7 NAME OF EACH PART OF THE PROJECTOR7 SETTING-UP THE PROJECTOR 8 CONNECTING THE AC POWER CORD 8 POSITIONING THE PROJECTOR 9 ADJUSTABLE FEET 9 MOVING THE PROJECTOR 10 CONNECTING THE PROJECTOR 11 TERMINALS OF THE PROJECTOR 11 CONNECTING TO T...
Page 6 - FEATURES AND DESIGN
LC-SM1 6 • Compact Design This projector is extremely compact in size and weight. It is designed to carry and work anywhere you wish to use. • Compatibility This projector widely accepts various video and computer input signals including; • Computers IBM-compatible and Macintosh computers up to 1280...
Page 7 - PREPARATION
Page 8 - CONNECTING THE AC POWER CORD
LC-SM1 8 PREPARATION This projector uses nominal input voltages of 100-120 V or 200-240 V AC. The projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug...
Page 9 - POSITIONING THE PROJECTOR; ADJUSTABLE FEET
LC-SM1 9 PREPARATION POSITIONING THE PROJECTOR • This projector is designed to project on a flat ROOM LIGHT projection surface. The brightness in the room has a great • The projector can be focused from 4.6’ (1.4m) 26.3 influence on the picture quality. It is (8.Om). recommended to limit ambient lig...
Page 10 - PREPERATION; MOVING THE PROJECTOR
LC-SM1 10 PREPERATION MOVING THE PROJECTOR When moving the projector, replace the lens cover and retract the feet to prevent damage to the lens and cabinet. When this projector is not in use for an extended period, put it into the case (carrying bag) supplied with this projector. The Carrying Bag (s...
Page 11 - CONNECTING THE PROJECTOR; COMPUTER; INPUT; TERMINAL; CONTROL PORT CONNECTOR
11 CONNECTING THE PROJECTOR Connect the composite video output from the video equipment to the to the Y/VIDEO or connect the component video outputs. , Pb/Cb and Pr/Cr jacks (Refer to P12.) Connect the audio output from the video equipment to this terminal. (Refer to P12.) Connect an external audio ...
Page 12 - Cables used for connection
12 CONNECTING THE PROJECTOR Cables used for connection (* = Cables are not supplied with this projector.) • Video Cable (RCA x 1 or RCA x 3) * • S-VIDEO Cable * • Audio Cable (RCA x 2- Mini Plug x 1 (stereo) or Mini Plug (stereo)) *
Page 14 - BEFORE OPERATION; Operating Range
14 BEFORE OPERATION Point the remote control toward the projector (the Remote Receiver) whenever pressing the buttons. Maximum operating range for the remote control is about 16.4’ (5m) and 60° in front of the projector. Operating Range
Page 15 - Remote Control Batteries Installation
15 BEFORE OPERATION Remote Control Batteries Installation To insure safe operation, please observe the following precautions: •Use (2) AA, UM3 or R06 type alkaline batteries. •Replace two batteries at the same time. •Do not use a new battery with a used battery. • Avoid contact with water or liquid....
Page 17 - HOW TO OPERATE ON-SCREEN MENU; FLOW OF ON-SCREEN MENU
17 HOW TO OPERATE ON-SCREEN MENU You can control and adjust this projector through the ON-SCREEN MENU. Refer to the following pages to operate each adjustment in the ON-SCREEN MENU. Move the pointer (see the NOTE below) by pressing POINT button(s) on the TOP CONTROL or the REMOTE CONTROL. Select the...
Page 18 - Press MENU BUTTON while in Computer mode.
18 BEFORE OPERATION Press MENU BUTTON while in Computer mode.
Page 19 - BASIC OPERATION; TURNING ON THE PROJECTOR; TURNING OFF THE PROJECTOR
19 BASIC OPERATION TURNING ON THE PROJECTOR 1 Complete the peripheral connections (with Computer, VCR, etc.) before turning on the projector. (Refer to “CONNECTING TO THE PROJECTOR” on Pages 11~-13 for connecting that equipment.) 2 Connect the projector’s AC Power Cord into a wall outlet. The LAMP i...
Page 20 - ZOOM ADJUSTMENT; KEYSTONE ADJUSTMENT
20 BASIC OPERATION ZOOM ADJUSTMENT Turn the ZOOM RING to adjust the projected picture size. Turn the ring to “WIDE” direction to make the image larger, and turn to “TELE” direction to make the image smaller. FOCUS ADJUSTMENT Turn the FOCUS RING to adjust the projected picture focus. KEYSTONE ADJUSTM...
Page 21 - SOUND MUTE ADJUSTMENT
21 BASIC OPERATION NO SHOW FUNCTION Press the NO SHOW button on the Remote Control Unit to black out the image. This function is cancelled when the NO SHOW button is pressed again or any other function button is pressed. PICTURE FREEZE FUNCTION Press the FREEZE button on the Remote Control Unit to f...
Page 22 - AUTOMATIC MULTI-SCAN SYSTEM; cannot discriminate or; SELECT COMPUTER SYSTEM MANUALLY; To set the Computer system manually, select the mode on the
22 COMPUTER MODE DIRECT OPERATION Select COMPUTER mode by pressing the MODE button on the Top Control or the COMPUTER button on the Remote Control Unit. MENU OPERATION Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Computer and press the SELECT...
Page 24 - COMPUTER MODE
24 COMPUTER MODE This Projector can automatically tune to the display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from the standard ones and may not be tuned by the Multi-Scan system of this projector. If this ...
Page 26 - NORMAL FUNCTION; ADJUST PICTURE IMAGE MANUALLY
26 COMPUTER MODE 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE ~ and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. 2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow ...
Page 29 - VIDEO SOURCE Menu
29 DIRECT OPERATION Select VIDEO mode by pressing the MODE button on the Top Control or the VIDEO button on the Remote Control Unit. MENU OPERATION Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Video and press the SELECT button. This projector...
Page 31 - ADJUSTING THE PICTURE IMAGE
31 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. 2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the item that...
Page 32 - SETTING
32 SETTING 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SETTING and press the SELECT button. Another dialog box SETTING Menu will appear. 2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the item that you wa...
Page 34 - APPENDIX; INSTALLATION; OPERATING WIRELESS MOUSE
34 APPENDIX The Wireless Remote Control Unit is not only able to operate the projector but also usable as a wireless mouse for most Personal Computers. The POINT buttons and the two CLICK buttons are used for the wireless mouse operation. The wireless mouse is available only when PC mouse pointer is...
Page 35 - CAUTION; CLEANING THE PROJECTION LENS
35 APPENDIX TEMPERATURE WARNING INDICATOR The TEMPERATURE W ARNING Indicator flashes red when the internal temperature of the projector exceeds the normal temperature. The Indicator stops flashing when the temperature of the projector returns to normal. When the TEMPERATURE WARNING Indicator continu...
Page 36 - ORDER REPLACEMENT LAMP; LAMP REPLACEMENT MONITOR TIMER
36 APPENDIX When the life of the Lamp of this projector draws to an end, the LAMP REPLACEMENT indicator lights yellow. W hen the image becomes dark or the color of the image becomes unnatural, replacement of the Lamp is required. CAUTION • For continued safety, replace with a lamp assembly of the sa...
Page 37 - Try these Solutions
37 Before calling your dealer or service center for assistance, check the matters below once again. 1. Make sure you have connected the projector to your equipment as described in the section “CONNECTING THE PROJECTOR” on pages 11 -. 13. 2. Check cable connection. Verify that all computer, video and...
Page 38 - Try these Solution
38 Problem: Try these Solution Remote Control Unit does not work • Check the batteries. • Check the ALL-OFF switch on the Remote Control Unit is set to “ON.”. • Make sure nothing is between the Remote Receiver and the Remote Control Unit. • Make sure you are not too far from the projector when using...
Page 39 - Multi-media Projector; OPTIONAL PARTS
39 Projector Type Multi-media Projector Dimensions (W x H x D) 7.44” x 2.93” x 11.42” (189mm x 74,5mm x29Omm) (not including Adjustable Feet and Lens) Net Weight 5.51 lbs (2.5 kg) LCD Panel System 0.7” TFT Active Matrix type, 3 panels Panel Resolution 800 x 600 dots Number of Pixels 1 .440,000 (800 ...
