EdgeStar TWR282S - Manual

w w w . E d g e S t a r. c o m

W I N E

8 6 6 . 5 1 2 . 4 8 7 2

Thermoelectric Wine Cooler

Model: TWR282S

Thank you for choosing this quality EdgeStar product. This

quick-reference guide is designed to supplement your

owner’s manual and help you get your wine cooler up and

running as fast as possible. For more detailed information,

please check your owner’s manual.

If you would like more help or troubleshooting for common

issues, feel free to visit us online at www.edgestar.com

Included accessories

This wine cooler ships with six wire shelves (installed), four

adjustable leveling legs (installed), a handle, keys, and a “water

box”. For unpacking instructions, see the owner’s manual.

Problems?

°

While EdgeStar uses only the finest materials and processes to

design, manufacture, and distribute products, occasionally

problems occur.

For damaged products (in delivery) or non-defective returns,

contact your dealer.

For missing parts, warranty service, or general questions-

please contact our EdgeStar Customer Service Specialists at

866.512.4872

A note on thermoelectric cooling

This EdgeStar wine cooler uses a thermoelectric Peltier unit to

provide environmentally-friendly, CFC-free cooling. In

addition to energy efficiency, and the previously-mentioned

environmental-friendliness, thermoelectric cooling is very

quiet, making it ideal for homes and offices.

While thermoelectric cooling offers many benefits, the

cooling performance of thermoelectric units tends to

strongly correlate to the environment in which the units are

located. In other words- the cooler the environment, the

better the cooling perfromance of the wine cooler.

In light of the above, it is helpful to note that this wine cooler

was designed for use in a “room temperature” environment

(i.e., with ambient temperatures in the mid-70’s).

Temperature range

This wine cooler has a temperature range of low 50’s to mid

60’s (F) under ideal conditions (see Notes on thermoelectric

cooling for more info). As detailed above, you can set your

desired temperature using the controls.

For your reference, many wine experts suggest that 55°F is an

ideal temperature for storage of most varieties of wine.

However, the ideal drinking temperatures for most wines

differ. We suggest you do a little research to determine at

what temperatures you most enjoy your favorite wines, but

we suggest temperatures in the low 50’s for white wines and

“room” temperatures (or slightly cooler) for red wines.

Please note that this appliance is a wine cooler- not a refrig-

erator. If you feel that the wine cooler is not cold enough, we

suggest making sure the unit is on its lowest setting, giving

the unit at least 24 hours to cool, and making sure the unit is

not exposed to direct sunlight or excessive heat.

Power and controls

Once your wine cooler is completely unpacked and set up,

you can plug it in and begin using it.

Operation of the controls are quite simple- turn the thermo-

stat located at the top right rear of the inside of the unit to

control the temperature. Turn the thermostat clockwise to

decrease the temperature and counter-clockwise to increase

the temperature or turn off the cooling unit.

To turn the light on or off, locate the light switch (inside the

unit on the upper right side. This switch toggles the LED light

on and off.

Lock and handle

This wine cooler ships with a handle and lock. To install the

handle, follow the instructions in the owner’s manual.

To use the lock, close the door. Insert a key (included) into the

keyhole. Turn the key clockwise to lock the door. To unlock the

door, again insert the key into the keyhole. Turn the key

counter-clockwise.