Edelbrock 9638 - Manual
Edelbrock 9638 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
®
HARDENED PUSHRODS
CATALOG #9629, #9630, #9631, #9632, #9633, #9637, & 9638
(See Description Below)
INSTRUCTIONS
•
PLEASE
study these instructions carefully before installing your new pushrods. If you have any questions or problems, do
not hesitate to contact our
Technical Hotline at: 1-800-416-8628,
7 am - 5 pm, Monday-Friday, Pacific Standard Time
or e-mail us at
edelbrock.edelbrock.com
.
•
DESCRIPTIONS
#9629 - For Small-Block Chevrolet V8s, 5/16" diameter (+.100” Longer Than Stock)
#9630 - For Small-Block Chevrolet V8s, 5/16" diameter (standard length)
#9631 - For Big-Block Chevrolet V8s, 5/16" diameter (standard length)
#9632 - For Small-Block Ford V8s, 5/16" diameter (standard length)
#9633 - For 351 M/400 Ford V8s, 5/16" diameter (standard length)
#9637 - For 343-401 AMC V8s, 5/16” diameter (standard length)
#9638 - For Chrysler Magnum 5.2L & 5.9L V8s, 5/16” diameter (standard length)
•
PUSHRODS:
These pushrods are manufactured from case hardened tubing. They are designed to be used in engines with
or without hardened steel guideplates. Guideplate slots must be correct width for 5/16" pushrods. Lube all parts thoroughly
upon installation. Use moly lube (preferred) or motor oil.
Hardened Pushrods
Brochure #63-0098
©2004 Edelbrock Corporation
Rev. 8/04
®
Hardened Pushrods
Brochure #63-0098
©2004 Edelbrock Corporation
Rev. 8/04
•
PLEASE
study these instructions carefully before installing your new pushrods. If you have any questions or problems, do
not hesitate to contact our
Technical Hotline at: 1-800-416-8628,
7 am - 5 pm, Monday-Friday, Pacific Standard Time
or e-mail us at
edelbrock.edelbrock.com
.
•
DESCRIPTIONS
#9629 - For Small-Block Chevrolet V8s, 5/16" diameter (+.100” Longer Than Stock)
#9630 - For Small-Block Chevrolet V8s, 5/16" diameter (standard length)
#9631 - For Big-Block Chevrolet V8s, 5/16" diameter (standard length)
#9632 - For Small-Block Ford V8s, 5/16" diameter (standard length)
#9633 - For 351 M/400 Ford V8s, 5/16" diameter (standard length)
#9637 - For 343-401 AMC V8s, 5/16” diameter (standard length)
#9638 - For Chrysler Magnum 5.2L & 5.9L V8s, 5/16” diameter (standard length)
•
PUSHRODS:
These pushrods are manufactured from case hardened tubing. They are designed to be used in engines with
or without hardened steel guideplates. Guideplate slots must be correct width for 5/16" pushrods. Lube all parts thoroughly
upon installation. Use moly lube (preferred) or motor oil.
HARDENED PUSHRODS
CATALOG #9629, #9630, #9631, #9632, #9633, #9637, & 9638
(See Description Below)
INSTRUCTIONS
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
