Edelbrock 72285 - Manual
Edelbrock 72285 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
KING DEMON MICROSWITCH BRACKET
CATALOG #72285
INSTALLATION INSTRUCTIONS
1. Apply a small bead of thread lock to the end of the
supplied screws (A).
2. Insert screws (A) through bracket; (B) and tighten
into stand-offs(C).
3. Apply a small bead of thread lock to the end of the
supplied screws (E).
4. Insert screws (E) through microswitch (D) and
tighten into stand-offs (C).
5. Install microswitch bracket onto carburetor studs
over the base of the carburetor on the passenger
side of the carburetor (opposite side of the linkage).
6. Check for full throttle, microswitch operation, and
throttle return.
A
B
C
D
E
©2002 Edelbrock Corporation
Rev. 08/02
Brochure #63-0127
KING DEMON MICROSWITCH BRACKET
CATALOG #72285
INSTALLATION INSTRUCTIONS
1. Apply a small bead of thread lock to the end of the
supplied screws (A).
2. Insert screws (A) through bracket; (B) and tighten
into stand-offs(C).
3. Apply a small bead of thread lock to the end of the
supplied screws (E).
4. Insert screws (E) through microswitch (D) and
tighten into stand-offs (C).
5. Install microswitch bracket onto carburetor studs
over the base of the carburetor on the passenger
side of the carburetor (opposite side of the linkage).
6. Check for full throttle, microswitch operation, and
throttle return.
©2002 Edelbrock Corporation
A
B
D
E
C
Rev. 08/02
Brochure #63-0127
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
