Edelbrock 7162 - Manual
Edelbrock 7162 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7162
ENGINE: Chevrolet 396-454 c.i.d. V8
RPM RANGE: 1500-6500
CAUTION:
Do not use dual valve springs. Use recommended
Edelbrock Sure Seat or equivalent valve springs #5762. Use stock ratio
rocker arms only.
Duration at .006" Lift:
Intake 300°
Exhaust 306°
Duration at .050" Lift:
Intake 240°
Exhaust 246°
Lift at cam:
Intake .330"
Exhaust .337"
Lift at valve:
Intake .560"
Exhaust .573"
Timing at .050 Lift:
Open
Close
Intake
10° BTDC
50° ABDC
Exhaust
57° BBDC
9° ATDC
Centerlines:
Intake: 110°
Lobe Separation:
112°
CAUTION:
Use Edelbrock Performer-Link Timing Chain and Gear Set
#7810 or Accu-Drive gear drive #7891. Do not use late model timing
chain and gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and are not
recommended for this camshaft installation. Edelbrock Timing Sets
feature three keyways for specified timing selection. Use "0" position
for most applications.
©2006 Edelbrock Corporation
Brochure #63-0486
Catalog #7162
Rev. 1/06
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7162
ENGINE: Chevrolet 396-454 c.i.d. V8
RPM RANGE: 1500-6500
CAUTION:
Do not use dual valve springs. Use recommended
Edelbrock Sure Seat or equivalent valve springs #5762. Use stock ratio
rocker arms only.
Duration at .006" Lift:
Intake 300°
Exhaust 306°
Duration at .050" Lift:
Intake 240°
Exhaust 246°
Lift at cam:
Intake .330"
Exhaust .337"
Lift at valve:
Intake .560"
Exhaust .573"
Timing at .050 Lift:
Open
Close
Intake
10° BTDC
50° ABDC
Exhaust
57° BBDC
9° ATDC
Centerlines:
Intake: 110°
Lobe Separation:
112°
CAUTION:
Use Edelbrock Performer-Link Timing Chain and Gear Set
#7810 or Accu-Drive gear drive #7891. Do not use late model timing
chain and gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and are not
recommended for this camshaft installation. Edelbrock Timing Sets
feature three keyways for specified timing selection. Use "0" position
for most applications.
©2006 Edelbrock Corporation
Brochure #63-0486
Catalog #7162
Rev. 1/06
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7162
ENGINE: Chevrolet 396-454 c.i.d. V8
RPM RANGE: 1500-6500
CAUTION:
Do not use dual valve springs. Use recommended
Edelbrock Sure Seat or equivalent valve springs #5762. Use stock ratio
rocker arms only.
Duration at .006" Lift:
Intake 300°
Exhaust 306°
Duration at .050" Lift:
Intake 240°
Exhaust 246°
Lift at cam:
Intake .330"
Exhaust .337"
Lift at valve:
Intake .560"
Exhaust .573"
Timing at .050 Lift:
Open
Close
Intake
10° BTDC
50° ABDC
Exhaust
57° BBDC
9° ATDC
Centerlines:
Intake: 110°
Lobe Separation:
112°
CAUTION:
Use Edelbrock Performer-Link Timing Chain and Gear Set
#7810 or Accu-Drive gear drive #7891. Do not use late model timing
chain and gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and are not
recommended for this camshaft installation. Edelbrock Timing Sets
feature three keyways for specified timing selection. Use "0" position
for most applications.
©2006 Edelbrock Corporation
Brochure #63-0486
Catalog #7162
Rev. 1/06
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7162
ENGINE: Chevrolet 396-454 c.i.d. V8
RPM RANGE: 1500-6500
CAUTION:
Do not use dual valve springs. Use recommended
Edelbrock Sure Seat or equivalent valve springs #5762. Use stock ratio
rocker arms only.
Duration at .006" Lift:
Intake 300°
Exhaust 306°
Duration at .050" Lift:
Intake 240°
Exhaust 246°
Lift at cam:
Intake .330"
Exhaust .337"
Lift at valve:
Intake .560"
Exhaust .573"
Timing at .050 Lift:
Open
Close
Intake
10° BTDC
50° ABDC
Exhaust
57° BBDC
9° ATDC
Centerlines:
Intake: 110°
Lobe Separation:
112°
CAUTION:
Use Edelbrock Performer-Link Timing Chain and Gear Set
#7810 or Accu-Drive gear drive #7891. Do not use late model timing
chain and gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and are not
recommended for this camshaft installation. Edelbrock Timing Sets
feature three keyways for specified timing selection. Use "0" position
for most applications.
©2006 Edelbrock Corporation
Brochure #63-0486
Catalog #7162
Rev. 1/06
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
