Edelbrock 70207 - Manual
Edelbrock 70207 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Introduction to the Edelbrock Nitrous Systems Kit
- Page 3 – Electrical System Installation (Continuation)
- Page 4 – Before You Install Your Edelbrock Nitrous System...; Hand Tools
- Page 5 – WHAT IS NITROUS OXIDE?; Safety Steps For Working With Nitrous Oxide; Nytrous Plus; Do not
- Page 6 – Introduction to your Edelbrock LT1 Performer EFI Nitrous System; ....There is safety related information here.; General Information; Horsepower
- Page 8 – Performer LT-1 Kit Bill of Materials
- Page 9 – It is illegal to tamper with or remove this device.; Bottle Safety Information; siphon tube inside the bottle or the bottle valve itself.; Racing Vehicles; Bottle Valve Handle Pictured
- Page 11 – Nitrous Bottle Installation; Street Car Installations; Disconnect vehicle’s battery.; attempt to install the bottle in the bracket without the; Race Car Nitrous Bottle Installations; Please contact Edelbrock for more information.
- Page 12 – Nitrous Feed Line Mounting; Attach nitrous supply line to bottle.; Solenoid Mounting; use Teflon paste only; Solenoid Safety Information; Keep solenoid and lines away from exhaust components.; Preparing To Mount Your Solenoids; port on
- Page 13 – Nitrous Spray Nozzle Installation
- Page 14 – Locate the fuel rail test port fitting.
- Page 15 – Fuel Pump Installation; Install cut fuel lines and secure using the supplied hose clamps.
- Page 16 – Quantity
- Page 17 – Nitrous Electrical System W
- Page 18 – Wire Schematic Origin and Destination Map
- Page 19 – Arming Switch and Installation; Locate the final position of your arming switch.; Microswitch Installation and Wiring
- Page 20 – Microswitch Installation and Wiring (Continued); At no time should the microswitch be enabled before wide
- Page 21 – Fuel Booster Pump Electrical Components Bill of Materials (BOM); Wire harness with integral relay/fuse holder
- Page 22 – Wire Color; Red
- Page 24 – Final Electrical Installation Recommendations; manifolds, and EGR crossovers to name a few.
- Page 25 – Before You Run Your Vehicle Using Your Edelbrock Nitrous System; and main nitrous supply line is empty of any nitrous.; Fuel System Check; Hook up all battery leads.; Nitrous System Check
- Page 26 – Troubleshooting and Routine Maintenance; Symptom #2... Engine runs excessively rich when system is activated.
- Page 27 – Symptom #4... Engine detonates mildly when system is activated.
- Page 28 – Solenoid Inspection and Maintenance.; Close valve on nitrous bottle.; Do not open pressurized fuel lines over a hot engine.; Remove coil and housing from nitrous solenoid base.; Do not use pliers on; damage to the stem will result.; Do not use an oil-based solvent to clean any part of the solenoid.; Re-assemble solenoid by reversing disassembly procedure.
2001 Edelbrock Corporation
Brochure No. 63-0020
©
Rev. 10/01
Thank You….
…for purchasing an Edelbrock Nitrous Oxide Injection System.
Nitrous Oxide injection is one of the most exciting performance enhancements, for the dollar invested, on the market today.
With the use of nitrous oxide come some important safety considerations. This manual has been written to help you during
the installation and use of your Edelbrock Nitrous System. Please read it completely before you install and use your
system. Please pay close attention to the safety information at the beginning of each section. The information contained
there specifically pertains to each of the components and installation methodologies within the section.
Please take the time to read and understand the following….
By installing your Edelbrock Nitrous System, you indicate you have read this document and you agree with the terms stated
below:
It is the responsibility of the purchaser to follow all installation instruction guidelines and safety procedures supplied with
the Edelbrock Nitrous Systems. It is also the responsibility of the purchaser to determine the compatibility of the product
with the vehicle or the device on which the purchaser intends to install it.
Edelbrock Corporation assumes no responsibility for damages occurring from misuse, abuse, improper installation,
improper operation, lack of responsible care, or all previously-stated reasons resulting from incompatibility with other
manufacturer’s products and/or systems.
Edelbrock Corporation neither recommends nor condones the use of products manufactured or sold by Edelbrock
Corporation for use on vehicles, which may be driven on public roads or highways, and assumes no responsibility for
damages incurred by such use.
Edelbrock Corporation assumes no responsibility for damages incurred by the use of products manufactured or sold by
Edelbrock Corporation on vehicles used for competition or racing.
Edelbrock General Warranty
It is the constant endeavor of Edelbrock Corporation to give our customers the highest quality products obtainable.
Edelbrock warrants each new product, except Performer Series Carburetors, Race Division Parts, Tubular Exhaust
Systems, RPM Series Mufflers, Cat-Back Systems and Performer IAS Shock Absorbers which are warranted separately,
to be free from defects in both workmanship and material for a period of one (1) year from the date of purchase, provided
that the product is properly installed, subjected to normal use and service and that the product is not modified or changed
in any way, negligence by customer or installer or used for racing or competition purposes.
Our warranty service and repair facility is located at 2700 California Street, Torrance, California 90503. Customers who
believe they have a defective product should either return it to the dealer from which it was purchased or ship it directly to
Edelbrock along with proof of purchase and a complete description of the problem. The product must be returned freight
pre-paid. If a thorough inspection of the product by the factory indicates defects in workmanship or material, our sole
obligation shall be to repair or replace the product. Warranty covers only the product itself and not the cost of installation
or removal.
Edelbrock Corporation shall not be liable for any and all consequential damages occasioned by the breach of any
written or implied warranty pertaining to this sale in excess of the purchase price of the product sold.
If you have any questions regarding a product or installation, please contact our Technical Department, toll free
at 1-800-416-8628 from 7:00am to 5:00pm PST, Monday through Friday.
Thank you again for choosing Edelbrock Nitrous Systems.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2001 Edelbrock CorporationBrochure No. 63-0020 © Rev. 10/01 LT1 CAMARO / FIREBIRD / IMPALA PERFORMER EFI SERIES NITROUS SYSTEM Table of Contents Page # a. Before You Install Your Edelbrock Nitrous System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 b. What is Nit...
2001 Edelbrock CorporationBrochure No. 63-0020 © Rev. 10/01 Page 2 of 27 LT1 CAMARO / FIREBIRD / IMPALA PERFORMER EFI SERIES NITROUS SYSTEM Table of Contents Page # 3.0 Electrical System Installation (Continuation) 3.8 Fuel Booster Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
2001 Edelbrock CorporationBrochure No. 63-0020 © Rev. 10/01 Page 3 of 27 Caution!! Before You Install Your Edelbrock Nitrous System… Please read this Installation manual fully before installing this system. You will need to have available the following tools: Hand Tools • Socket set including ratche...
