Edelbrock 70025 - Manual
Edelbrock 70025 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION; Failure to; Remove your current Performer RPM Nitrous Solenoid.; DISASSEMBLY; Remove the carburetor.
- Page 3 – JET MAP INFORMATION; DOMINATOR-FLANGE JET MAP; Both the fuel and the nitrous inlets to the plate are
- Page 4 – Edelbrock General Warranty
Catalog #70024 & 70025
Brochure No. 63-0182
Page 1 of 4
©2003 Edelbrock Corporation
Rev. 7/03
Victor Jr. Plate Upgrade Kits
for Squareflange and Dominator Carburetors
Kit #70024 and #70025
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new Edelbrock Nitrous Kit.
Failure to follow
instructions will void the warranty and may cause damage to parts and/or personal injury. If you have any questions or
problems, please call our
Technical Hotline at: 1-800-416-8628
, 7:00 am - 5:00 pm, Monday through Friday, Pacific
Standard Time or e-mail us at:
Please fill out and mail your warranty card.
Thank You….
…for purchasing an Edelbrock Nitrous Oxide Injection System.
Nitrous Oxide injection is one of the most exciting performance enhancements, for the dollar invested, on the market today.
With the use of nitrous oxide come some important safety considerations. This manual has been written to help you during
the installation and use of your Edelbrock Nitrous System. Please read it completely before you install and use your
system. Please pay close attention to the safety information at the beginning of each section. The information contained
there specifically pertains to each of the components and installation methodologies within the section.
The Victor Jr. Plate Upgrade Kit is a kit designed to be used as an upgrade from an existing Performer RPM Nitrous System
to the Victor Jr. Nitrous System using both new and existing components. This kit comes complete with everything needed
for a finished installation if you still have all of your Performer RPM components.
70024
70025
Item # Qty.
Description
1
1
Performer RPM Fuel Solenoid
2
1
Performer RPM Nitrous Solenoid
3
2
3AN to 1/8”NPT Blue Nitrous Tee
4
2
3AN to 1/8”NPT Red Fuel Tee
5
1
Teflon Bottle Nut Washer
6
2
6AN to ¼”NPT Blue Fitting
7
2
6AN to ¼”NPT Red Fitting
8
4
Solenoid Bracket Screws
1
2
3
4
5
6
7
8
9
10
11
12
Item# Qty.
Description
9
1
6AN Blue Tee
10
2
6AN Blue Steel Braided Hose
11
4
3AN Blue Steel Braided Hose
12
4
3AN Red Steel Braided Hose
13
2
Solenoid Brackets
14
5
Jets
15
1
6AN Bottle Nut
16
1
6AN Feed Line
14
13
15
16
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Catalog #70024 & 70025Brochure No. 63-0182 Page 2 of 4 ©2003 Edelbrock Corporation Rev. 7/03 INSTALLATION 1. Install you new Victor Jr. Nitrous Plate using thesupplied gaskets on the carburetor pad of your intakemanifold. Be sure that one gasket is placed on the padunder the Victor Jr. Nitrous P...
Catalog #70024 & 70025Brochure No. 63-0182 Page 3 of 4 ©2003 Edelbrock Corporation Rev. 7/03 JET MAP INFORMATION Edelbrock engineering has conducted dyno testing with the Victor Jr. system to provide jetting maps for two separateplates at different jetting levels. These jet combinations are supp...
Catalog #70024 & 70025Brochure No. 63-0182 Page 4 of 4 ©2003 Edelbrock Corporation Rev. 7/03 Edelbrock General Warranty It is the constant endeavor of Edelbrock Corporation to give our customers the highest quality products obtainable.Edelbrock warrants each new product, except Performer Series ...
