Edelbrock 68712 - Manual

Catalog #68712, 68713
©2006 Edelbrock Corporation

Page 1 of 3

Brochure #63-68712

Rev. 6/06 - DA/mc

TUBULAR EXHAUST SYSTEM

For 1982-1987 Camaro & Firebird

with LG-4 (Low Output) 305 C.I.D. V8 Engine

Catalog #68712, #68713

INSTALLATION INSTRUCTIONS

Please study these instructions carefully before installing your new

Tubular Exhaust System (TES). If you have any questions, please contact our

Technical Hotline at : 1-800-416-8628

from 7 am - 5pm, Monday-Friday, Pacific Standard Time or e-mail us at

[email protected]

.

TUBULAR EXHAUST SYSTEM:

These components are designed as a system to improve the exhaust efficiency of the GM 305 LG-4 V8 engine. A

performance gain can be expected by the installation of the system. This system requires no welding for installation and retains all O.E.M.
emissions equipment.

Suggested Tools Needed for Installation:

This vehicle has metric fasteners.

❑

3/8” ratchet socket set with extensions and universal 13mm and 15mm swivel sockets

❑

Combination set of open-end wrenches

❑

Jackstands, screwdrivers, pliers, crescent wrench, etc.

❑

Liquid penetrant, (GM #1052627) anti-seize compound (GM #5613695)

SPECIAL NOTICE:

This Edelbrock Tubular Exhaust System has received an Executive Order number (E.O.#) from the California Air Resources Board

(C.A.R.B.) making it legal for street use in all 50 states. To assist you with emission equipment certification, we have included a silver fan shroud
decal to help testing personnel verify the this part is a legal replacement on the vehicle for which it is cataloged. The adhesive-backed decal should
be affixed next to the existing emission and engine specifications decal. Do not cover any part of your original emission decal.

WARNING:

The use of "Thermal Wrap" or any aftermarket coating process

will void the warranty

on your Edelbrock Tubular Exhaust Systems.

Those products can cause excessive heat and moisture buildup resulting in corrosion and failure of the system.

NOTE:

High temperature spark plug wires and boots are recommended to withstand heat from T.E.S.

IMPORTANT NOTE:

Proper installation is the responsibility of the installer. Improper installation will void warranty and may result in poor

performance and engine or vehicle damage.

KIT CONTENTS

Catalog #68712 (Ceramic-Coated), #68713 (Ti-Tech Coated)

Qty.

Description

❑

1

Header left side #25-9331 (#68712)

❑

1

Header right side #25-9332 (#68712)

❑

1

Header left side #25-9003 (#68713)

❑

1

Header right side #25-9004 (#68713)

❑

1

Extension pipe left side #25-9503

❑

1

Extension pipe right side #25-9504

❑

1

Umpco clamp; 3/8” I.D.

❑

1

Umpco clamp; 1-5/8” I.D.

❑

1

Hex nut; 10-32

❑

1

Hex capscrew; 10-32 x 1”

❑

1

Star washer; 3/16” internal

❑

2

Tube spacer; 5/8” x 1.53”

❑

1

Tube spacer; 5/8” x .72

❑

2

Donut gaskets; 2-1/4”

Qty.

Description

❑

1

Flange connector

❑

1

U-Muffler clamp; 2-1/4”

❑

1

O2 Sensor pigtail wire; 12”

❑

2

Chevy V8 port gaskets

❑

1

Thermo wrap; 2” x 6”

❑

1

Safety wire; 8”

❑

2

Hex capscrews; 3/8” 16 x 2”

❑

2

Header bolts; 3/8” - 16 x 3”

❑

16

Split lock washers; 3/8”

❑

4

Flat washers; 3/8”

❑

12

Header bolts; 3/8” - 16 x 1”

❑

2

Hex cap screws; 3/8” - 16 x 3”

❑

1

O2 Sensor plug (if needed)

❑

4

Hardened washers; 3/8”