Edelbrock 66603 - Manual
Edelbrock 66603 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Catalog #s 66592, 66593, 66602, 66603
©2006 Edelbrock Corporation
Page 1 of 3
Brochure #63-66592
Rev. 606 - DA/mc
®
TUBULAR EXHAUST SYSTEM
Vehicle Applications: See Below
Catalog #66592, #66593
#66602, #66603
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new
Tubular Exhaust System (TES). If you have any
questions, please contact our
Technical Hotline at : 1-800-416-8628
from 7 am - 5pm, Monday-Friday, Pacific
Standard Time or e-mail us at
. Please fill out and mail your warranty card.
TUBULAR EXHAUST SYSTEM:
These components are designed as a system to improve the exhaust efficiency of the GM
T.B.I. (Throttle Body Injection) V8 engine. A performance gain can be expected by the installation of the system. This
system does not require welding for installation and retains all O.E.M. emissions equipment.
APPLICATIONS:
Catalog #s 66592 / 66593
- 1988-1995 Chevrolet & GMC Pick-Up; 2500 & 3500 Series, 2WD & 4WD, 454 C.I.D.,
Automatic & Standard Transmission, without A.I.R.
Catalog #s 66602 / 66603
- 1988-1995 Chevrolet & GMC Pick-Up; 2500 & 3500 Series, 2WD & 4WD, 454 C.I.D.,
Automatic & Standard Transmission, with A.I.R.
Suggested Tools Needed for Installation:
This vehicle has some metric fasteners.
❑
3/8” ratchet socket set with extensions and universal 13mm and 15mm swivel sockets
❑
Combination set of open-end wrenches
❑
Jackstands, screwdrivers, pliers, crescent wrench, etc.
❑
Liquid penetrant (GM #1052627), anti-seize compound (GM #5613695)
NOTE:
Some models will require a special power steering pulley puller; K-D 2897 or equivalent.
SPECIAL NOTICE:
This Edelbrock Tubular Exhaust System has received an Executive Order number (E.O.#) from the
California Air Resources Board (C.A.R.B.) making it legal for street use in all 50 states. To assist you with emission
equipment certification, we have included a silver fan shroud decal to help testing personnel verify the this part is a legal
replacement on the vehicle for which it is cataloged. The adhesive-backed decal should be affixed next to the existing
emission and engine specifications decal. Do not cover any part of your original emission decal.
WARNING:
The use of "Thermal Wrap" or any aftermarket coating process
will void the warranty
on your Edelbrock
Tubular Exhaust Systems. Those products can cause excessive heat and moisture buildup resulting in corrosion and
failure of the system.
NOTE:
High temperature spark plug wires and boots are recommended to withstand heat from T.E.S.
IMPORTANT NOTE:
Proper installation is the responsibility of the installer. Improper installation will void warranty and may
result in poor performance and engine or vehicle damage.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
